GUP-805A-60W - Network card Planet - Free user manual and instructions
Find the device manual for free GUP-805A-60W Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Card (PoE+ Injector) |
| Brand | Planet |
| Model | GUP-805A-60W |
| Interface | 1 x 10/100/1000Base-T RJ45 |
| Data Transfer Rate | Gigabit Ethernet |
| PoE Standard | IEEE 802.3af/at/bt (PoE/PoE+/PoE++) |
| PoE Power Output | Up to 60W per port |
| Input Voltage | 100-240V AC, 50/60Hz |
| Power Consumption | 65W (max) |
| Dimensions (W x D x H) | 94 x 70 x 26 mm |
| Weight | 180 g |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
| Certifications | CE, FCC |
| LED Indicators | Power, PoE, Link/Activity |
| Mounting | Desktop or wall mountable |
| Included Accessories | Power cord, user manual |
| Warranty | 2 years limited |
| Repairability | Not user-serviceable; contact support |
| Cleaning Instructions | Wipe with dry cloth; avoid liquids |
Frequently Asked Questions - GUP-805A-60W Planet
What is the Planet GUP-805A-60W?
The Planet GUP-805A-60W is a Gigabit PoE+ Injector that delivers up to 60W of power over Ethernet to compatible devices such as IP cameras, access points, and VoIP phones.
How do I install the GUP-805A-60W?
Connect the injector to your network switch using an Ethernet cable, then connect the powered device to the PoE port. Plug the power cord into the injector and an AC outlet. The Power LED will illuminate to indicate proper operation.
What PoE standards does it support?
It supports IEEE 802.3af (PoE), 802.3at (PoE+), and 802.3bt (PoE++) up to 60W, making it compatible with a wide range of devices.
Can I use this injector outdoors?
The GUP-805A-60W is designed for indoor use only. For outdoor installations, place it in a weatherproof enclosure.
What is the maximum cable length for PoE?
The maximum cable length is 100 meters (328 feet) when using standard Cat5e or better Ethernet cable.
Does this injector require a special power outlet?
No, it uses a standard IEC C13 power connector and accepts 100-240V AC, 50/60Hz, so it can be used worldwide with the appropriate power cord.
How do I troubleshoot if the PoE device is not powering on?
Check that the power cord is securely plugged in, the Power LED is lit, and the Ethernet cable is properly connected. Verify the powered device requires PoE and is not damaged. Try a different cable or port.
Can I daisy-chain multiple PoE injectors?
No, each injector must be connected directly to an AC outlet. They cannot be daisy-chained or powered from another PoE port.
Is the GUP-805A-60W compatible with 10/100Mbps devices?
Yes, it supports 10/100/1000Mbps Ethernet, so it works with older 10/100Mbps devices as well as gigabit devices.
What should I do if the device overheats?
Ensure the injector has adequate ventilation and is not placed in a confined space. If the overheat LED lights up, unplug it and let it cool. Contact Planet support if the problem persists.
User questions about GUP-805A-60W Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual GUP-805A-60W - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GUP-805A-60W by Planet.
USER MANUAL GUP-805A-60W Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : GUP-805A-60W
Category : Network card