Eroica - Turntable Goldring - Free user manual and instructions
Find the device manual for free Eroica Goldring in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Turntable |
| Drive System | Belt-drive |
| Speeds | 33 1/3 and 45 rpm |
| Dimensions (W x D x H) | 420 x 340 x 120 mm |
| Weight | 5.5 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 5W (standby), 10W (play) |
| Tonearm Type | Static balanced S-shaped |
| Effective Tonearm Length | 221 mm |
| Overhang | 18 mm |
| Tracking Force Range | 0 - 3.0 g |
| Anti-skating Adjustment | Yes, adjustable |
| Cartridge Included | Yes (moving magnet) |
| Output Level | 2.5 mV (phono) |
| Signal-to-Noise Ratio | >65 dB |
| Wow and Flutter | <0.15% |
| Platter Material | Aluminum die-cast |
| Platter Diameter | 300 mm |
| Maintenance | Clean stylus regularly; replace belt every 2-3 years |
| Safety | Auto-stop at end of record |
| Spare Parts | Belt, stylus, cartridge available separately |
Frequently Asked Questions - Eroica Goldring
What is the correct way to set up the turntable?
Place the turntable on a level, stable surface. Remove the platter and fit the belt around the motor pulley. Replace the platter, install the cartridge if not pre-fitted, and balance the tonearm according to the manual's instructions.
How do I change the speed from 33 to 45 rpm?
Gently move the speed selector switch on the top plate to the desired position. Ensure the platter has reached full speed before playing.
Why is there no sound coming from my speakers?
Check that the phono preamp is correctly connected and powered. If your amplifier has a phono input, ensure the turntable is connected to that. Also verify the cartridge wires are properly attached.
How often should I clean the stylus?
Clean the stylus after every 20-30 hours of play using a soft brush and stylus cleaning fluid. Avoid touching the stylus directly.
Can I replace the cartridge myself?
Yes, the cartridge is user-replaceable. Carefully unscrew the old cartridge, disconnect the wires, and attach the new one following the polarity markings. Rebalance the tonearm after replacement.
What should I do if the turntable hums?
Ensure the grounding wire from the turntable is connected to the ground terminal on your amplifier. Also check that all interconnects are securely plugged in and the turntable is not placed near strong magnetic fields.
Is the turntable compatible with 78 rpm records?
No, this model only supports 33 1/3 and 45 rpm. For 78 rpm, a different turntable or a special adapter would be required.
How do I adjust the anti-skating?
Set the anti-skating dial to the same value as the tracking force. For example, if tracking at 2.0 g, set anti-skating to 2.0. Fine-tune by listening for distortion.
What is the recommended tracking force range?
The recommended range is 1.5 to 2.5 grams for the supplied cartridge. Always refer to the cartridge specifications for precise settings.
How do I replace the drive belt?
Remove the platter, carefully stretch the old belt off the motor pulley and platter rim. Fit the new belt around the motor pulley and then around the platter rim. Replace the platter and allow the belt to settle.
User questions about Eroica Goldring
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Turntable in PDF format for free! Find your manual Eroica - Goldring and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Eroica by Goldring.
USER MANUAL Eroica Goldring
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Goldring
Model : Eroica
Category : Turntable