DS-PK1-LT-WE - Alarm system Hikvision - Free user manual and instructions
Find the device manual for free DS-PK1-LT-WE Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Alarm System |
| Brand | Hikvision |
| Model | DS-PK1-LT-WE |
| Dimensions (Main Unit) | 120 mm x 80 mm x 25 mm |
| Weight | 150 g |
| Power Supply | DC 12V / 2 AA batteries (backup) |
| Power Consumption | Standby: 50 mA; Alarm: 200 mA |
| Wireless Protocol | Hikvision-proprietary 433 MHz |
| Detection Range | Up to 100 m in open area |
| Number of Zones | 4 wireless zones |
| Main Functions | Intrusion detection, remote arm/disarm via app, siren, tamper alarm |
| Compatible Sensors | Door/window contact, PIR motion sensor, smoke detector |
| App Control | Hik-Connect app (iOS/Android) |
| Alarm Sound Level | 85 dB at 1 m |
| Battery Life (Backup) | Up to 12 hours |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
| Installation | Wall mount or tabletop |
| Maintenance | Clean with a soft dry cloth; replace batteries annually |
| Safety Certifications | CE, FCC, RoHS |
| Included Accessories | Main unit, power adapter, mounting screws, user manual |
| Warranty | 2 years |
Frequently Asked Questions - DS-PK1-LT-WE Hikvision
How do I pair the DS-PK1-LT-WE with sensors?
To pair a sensor, put the main unit into learning mode by pressing the pair button for 3 seconds. Then trigger the sensor (e.g., open a door contact). The unit will beep to confirm pairing.
What should I do if the alarm keeps triggering falsely?
Check sensor placement: avoid near heaters, windows, or pets. Reduce sensitivity via the Hik-Connect app. Also ensure batteries are fresh.
How to reset the alarm system to factory defaults?
Press and hold the reset button inside the battery compartment for 10 seconds until you hear a long beep. All settings will be cleared.
Can I use the DS-PK1-LT-WE without the app?
Yes, you can arm/disarm using the keypad on the main unit. However, the Hik-Connect app enables remote control and notifications.
What is the battery life of the backup batteries?
Backup batteries (2 x AA alkaline) last up to 12 hours during power outage. For best performance, replace them every year.
How do I change the alarm siren sound?
Siren sound can be selected in the Hik-Connect app under Alarm Settings. Options include continuous, pulsed, or silent.
What is the maximum number of sensors I can add?
The system supports up to 4 wireless zones, with one sensor per zone (e.g., door contact, motion detector). You can mix types.
Does the alarm send notifications to my phone?
Yes, when connected via the Hik-Connect app, you receive push notifications for any alarm event, low battery, or tamper.
How to test if the siren works?
Press the Test button on the side of the unit, or trigger any paired sensor. The siren should sound for 3 seconds.
Can I mount the main unit outdoors?
No, the DS-PK1-LT-WE is designed for indoor use only. It is not weatherproof. Keep it away from direct sunlight and moisture.
User questions about DS-PK1-LT-WE Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual DS-PK1-LT-WE - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PK1-LT-WE by Hikvision.
USER MANUAL DS-PK1-LT-WE Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-PK1-LT-WE
Category : Alarm system