HTA-800B - Receiver Taga Harmony - Free user manual and instructions
Find the device manual for free HTA-800B Taga Harmony in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Integrated Amplifier / Receiver |
| Power Output | 2 x 80W (8Ω, 20Hz-20kHz, 0.05% THD) |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Inputs | 4x RCA line, 1x Phono (MM), 1x Optical, 1x Coaxial |
| Outputs | Speaker A/B, Pre-out, Subwoofer out, Headphone 6.3mm |
| Dimensions (W x H x D) | 430 x 145 x 370 mm |
| Weight | 8.5 kg |
| Power Supply | AC 230V, 50Hz (or 115V, depends on region) |
| Power Consumption | 350W (max), <0.5W standby |
| Main Functions | Volume, Source Select, Bass/Treble Tone Control, Loudness, Mute, Remote Control |
| Care & Cleaning | Wipe with a soft, dry cloth; do not use solvents or liquids. |
| Safety | Do not open the device; keep in a well-ventilated area; avoid moisture. |
| Spare Parts & Repairability | Contact Taga Harmony authorized service center for genuine parts. |
| General Information | High-quality audiophile components, toroidal transformer, aluminum front panel. |
Frequently Asked Questions - HTA-800B Taga Harmony
How do I connect my speakers to the HTA-800B?
Use speaker cables with banana plugs or bare wire. Connect to the Speaker A or B terminals, ensuring positive to positive (+ to +) and negative to negative (- to -). The impedance should be 4-16Ω.
Can I use a turntable with the HTA-800B?
Yes, there is a dedicated Phono input for moving magnet (MM) cartridges. Connect your turntable with an RCA cable and ground wire if available.
What is the power output of the HTA-800B?
The amplifier delivers 2 x 80W continuous into 8 ohms, with low distortion.
Does the HTA-800B have a headphone output?
Yes, there is a 6.3mm headphone jack on the front panel. When headphones are plugged in, the speaker outputs are muted.
How do I connect a TV or other digital source?
Use the optical or coaxial digital input. Connect your TV's digital audio output to the corresponding input on the receiver.
Can I use the HTA-800B as a preamp only?
Yes, the Pre-out jacks allow you to connect an external power amplifier. The internal amplifier will still power speakers unless you use the preamp mode.
What is the standby power consumption?
In standby mode, the HTA-800B consumes less than 0.5W to save energy.
How do I clean the HTA-800B?
Wipe the exterior with a soft, dry cloth. Do not use any cleaning agents or water. Keep vents free of dust.
Does the HTA-800B include a remote control?
Yes, a full-function remote control is included for volume, source selection, and tone controls.
What are the dimensions and weight?
The receiver measures 430mm wide, 145mm high, and 370mm deep, and weighs approximately 8.5 kg.
User questions about HTA-800B Taga Harmony
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual HTA-800B - Taga Harmony and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HTA-800B by Taga Harmony.
USER MANUAL HTA-800B Taga Harmony
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Taga Harmony
Model : HTA-800B
Category : Receiver