TI-HED - Measuring equipment SAUTER - Free user manual and instructions
Find the device manual for free TI-HED SAUTER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Measuring Equipment |
| Brand | Sauter |
| Model | TI-HED |
| Dimensions (approx.) | 150 x 70 x 25 mm |
| Weight (approx.) | 200 g |
| Power Supply | 2x AAA batteries (1.5V each) |
| Main Functions | AC/DC voltage, current, resistance, continuity test, diode test, capacitance measurement |
| Display | Digital LCD, 3-1/2 digit |
| Auto-ranging | Yes |
| Safety Rating | CAT II, 600V |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Maintenance | Clean with dry cloth; avoid moisture; replace batteries when low |
| Safety Precautions | Disconnect before changing battery; do not exceed rated voltage; use insulated probes |
| Spare Parts | Batteries, test leads, fuses (if applicable) |
| Repairability | Battery and fuse replacement user-serviceable; other repairs by qualified personnel |
| Warranty | Standard 2-year warranty |
Frequently Asked Questions - TI-HED SAUTER
How do I measure DC voltage?
Set the rotary switch to the DC voltage range (V with straight and dotted lines). Connect the test leads: red to positive, black to common. Touch the probes to the circuit points. Read the value on the display. Ensure correct polarity to avoid damage.
How do I test continuity?
Turn the dial to the continuity or diode check position (usually a sound wave symbol). Connect the probes across the component. A beep indicates continuity (low resistance). Ensure the circuit is de-energized before testing.
What does 'OL' on the display mean?
'OL' stands for Over Limit or overload. It means the measured value exceeds the selected range. Switch to a higher range if available. For resistance, it may indicate an open circuit.
Why doesn't my meter turn on?
Check the batteries; they may be depleted or incorrectly installed. Replace with fresh 1.5V AAA batteries. Also inspect the battery contacts for corrosion. If the meter still does not power on, contact Sauter support.
How do I change the batteries?
Turn off the meter and disconnect test leads. Remove the battery compartment screw (usually at the back). Slide off the cover. Replace with two AAA 1.5V batteries observing correct polarity. Replace the cover and screw.
Can I measure AC current with this device?
Yes, if your model includes AC current measurement. Set the rotary switch to the AC current range (A with a wavy line). Connect the probes in series with the circuit. Do not exceed the rated current (typically 10A for short periods).
How do I clean and store the device?
Wipe the exterior with a dry, soft cloth. Do not use solvents or abrasive cleaners. Store in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
What safety precautions should I take?
Always inspect test leads for damage before use. Do not measure voltages higher than the rated category (e.g., 600V CAT II). Use appropriate personal protective equipment. Never touch exposed metal probes when measuring live circuits.
Is the device auto-ranging?
Yes, the TI-HED is auto-ranging for most functions, automatically selecting the correct range. However, manual range selection is available for some modes. Refer to the manual for specific operation.
How do I know if the fuse is blown?
If the meter cannot measure current or resistance in certain ranges, the fuse may be blown. To check, open the battery compartment and locate the fuse. Use a multimeter to test continuity. Replace with a same rating fuse (typically 250mA or 10A).
User questions about TI-HED SAUTER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual TI-HED - SAUTER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TI-HED by SAUTER.
USER MANUAL TI-HED SAUTER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SAUTER
Model : TI-HED
Category : Measuring equipment