M2si - Receiver Musical Fidelity - Free user manual and instructions
Find the device manual for free M2si Musical Fidelity in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Integrated Amplifier / Receiver |
| Brand | Musical Fidelity |
| Model | M2si |
| Power Output | 50 watts per channel into 8 ohms (RMS) |
| Frequency Response | 20 Hz – 20 kHz (±0.5 dB) |
| Total Harmonic Distortion (THD) | < 0.01% at 1 kHz |
| Inputs | 4x RCA line-level, 1x RCA phono (MM), 1x USB (for DAC) |
| Outputs | 1x RCA pre-out, 2x speaker terminals |
| Dimensions (W x H x D) | 440 x 100 x 340 mm |
| Weight | 8.5 kg |
| Power Supply | AC 230V, 50Hz (or 115V depending on region), 300W max consumption |
| Standby Power Consumption | < 0.5 W |
| Phono Stage | Built-in MM phono preamp |
| Headphone Output | 6.35mm jack, suitable for most headphones |
| Remote Control | Included, IR remote |
| Safety Features | Overheating protection, short-circuit protection |
| Maintenance | Clean with dry cloth; avoid liquids; keep ventilation slots clear |
| Spare Parts & Repairability | Contact authorized service center; spare parts available for 10 years |
| General Information | Designed and engineered in the UK; high-quality construction with aluminum front panel |
Frequently Asked Questions - M2si Musical Fidelity
How do I connect my speakers to the M2si?
Use high-quality speaker cables. Connect the positive terminal of the amplifier to the positive terminal of the speaker, and negative to negative. Ensure the speaker impedance is at least 4 ohms.
Can I use the M2si as a preamp only?
Yes, use the pre-out RCA outputs to connect to an external power amplifier. The internal amplifier stage can be bypassed.
What type of phono cartridge works with the built-in phono stage?
The built-in phono stage is designed for Moving Magnet (MM) cartridges. Moving Coil (MC) cartridges require an external phono preamp.
How do I set up the USB input for my computer?
Connect the M2si to your computer via USB cable. Your computer should recognize it as a audio device. Select the USB input on the amplifier. No driver installation is needed for most systems.
What is the recommended power cable?
Use the supplied power cable. Ensure the voltage matches your local mains (115V or 230V). Do not use extension cords with insufficient rating.
Why is my amplifier not turning on?
Check that the power cable is securely connected and the mains switch is on. Ensure the unit is not in standby mode. If still not working, check the fuse and contact support.
Can I bi-wire my speakers?
The M2si has single speaker terminals. For bi-wiring, you need a speaker that allows it and you must connect the amplifier's single output to both terminals using a jumper or bi-wire cable.
How often should I clean the amplifier?
Clean the exterior with a soft, dry cloth as needed. Avoid using any liquids or sprays. Ensure ventilation slots are free of dust.
What is the warranty period?
Musical Fidelity offers a standard 2-year warranty from the date of purchase. Warranty terms may vary by region.
Where can I download the full manual?
The full manual is available for free download on notice-facile.com. Search for 'Musical Fidelity M2si'.
User questions about M2si Musical Fidelity
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual M2si - Musical Fidelity and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M2si by Musical Fidelity.
USER MANUAL M2si Musical Fidelity
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Musical Fidelity
Model : M2si
Category : Receiver