Rogue ET 200iP Pro - Welding machine Esab - Free user manual and instructions
Find the device manual for free Rogue ET 200iP Pro Esab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inverter welding machine |
| Model | Rogue ET 200iP Pro |
| Brand | Esab |
| Welding Processes | TIG (DC), MMA (Stick) |
| Input Voltage | 230 V ±15%, 1-phase, 50/60 Hz |
| Input Current | 16 A (max) |
| Output Current Range (MMA) | 10 A – 200 A |
| Output Current Range (TIG) | 4 A – 200 A |
| Duty Cycle (MMA) | 60% @ 200 A, 100% @ 150 A |
| Duty Cycle (TIG) | 60% @ 200 A, 100% @ 150 A |
| Open Circuit Voltage | 80 V (TIG), 65 V (MMA) |
| Weight | 8.5 kg (18.7 lbs) |
| Dimensions (L x W x H) | 400 x 200 x 300 mm |
| Cooling | Fan forced, thermal overload protection |
| Functions | Hot start, anti-stick, arc force, lift TIG, pulse TIG |
| Display | Digital (current/voltage) |
| Gas Connection | G1/4" for TIG torch |
| Insulation Class | H |
| Protection Class | IP23 |
| Maintenance | Regular cleaning of dust, check cables and connections |
| Safety Features | Overheating protection, overcurrent protection, voltage reduction device |
| Spare Parts | Contact Esab service center for genuine parts |
| Repairability | Serviceable by qualified technicians |
| General Information | Portable design suitable for workshop and field use |
Frequently Asked Questions - Rogue ET 200iP Pro Esab
What welding processes can the Rogue ET 200iP Pro perform?
The machine supports TIG (DC) with lift start and MMA (Stick) welding.
What is the input voltage requirement?
It requires a 230 V ±15% single-phase power supply at 50/60 Hz.
How do I connect the TIG torch?
Connect the TIG torch to the negative (-) output terminal and the gas hose to the G1/4" fitting.
What is the maximum welding current for MMA?
The MMA output current range is 10 A to 200 A.
Does the machine have a hot start function?
Yes, it includes hot start to help ignite the arc in MMA mode.
How do I clean the machine?
Regularly blow out dust from the cooling fan and vents with dry compressed air. Wipe the casing with a damp cloth.
What safety features are included?
The welder has overheating protection, overcurrent protection, and a voltage reduction device for safety.
Can I use this machine for aluminum welding?
For aluminum, TIG with AC is needed. This model is DC only, so it is not suitable for aluminum.
How do I adjust the welding current?
Use the digital control knob on the front panel to set the desired current. The display shows the value.
Where can I find spare parts?
Contact your nearest Esab authorized service center for genuine spare parts and repairs.
User questions about Rogue ET 200iP Pro Esab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Welding machine in PDF format for free! Find your manual Rogue ET 200iP Pro - Esab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Rogue ET 200iP Pro by Esab.
USER MANUAL Rogue ET 200iP Pro Esab
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Esab
Model : Rogue ET 200iP Pro
Category : Welding machine