Workzone

WZK 180 - Compressor Workzone - Free user manual and instructions

Find the device manual for free WZK 180 Workzone in PDF.

📄 24 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Workzone WZK 180 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Air Compressor
Brand Workzone
Model WZK 180
Motor Power 1800 W (approx.)
Maximum Pressure 8 bar (116 psi)
Tank Capacity 24 L (approx.)
Air Delivery Approx. 200 L/min
Power Supply 230 V ~ 50 Hz
Dimensions (L x W x H) Approx. 50 x 30 x 50 cm
Weight Approx. 15 kg
Noise Level Approx. 85 dB(A)
Features Oil-free pump, thermal overload protection, pressure regulator, safety valve
Maintenance Regularly drain condensation from tank; check air filter; inspect hoses for leaks
Safety Always wear eye protection; do not exceed rated pressure; use in well-ventilated area
Spare Parts Availability Contact Workzone service center for genuine parts
Applications Inflation, pneumatic tools, painting, cleaning

Frequently Asked Questions - WZK 180 Workzone

How do I adjust the pressure on my Workzone WZK 180 compressor?
Turn the pressure regulator knob clockwise to increase pressure, counterclockwise to decrease. The gauge shows the outlet pressure.
What type of oil does the WZK 180 compressor require?
The WZK 180 is an oil-free compressor, so no oil is needed for the pump. Only lubricate moving parts as specified in the manual.
Why is the compressor not building pressure?
Check for air leaks in hoses or fittings, ensure the safety valve is closed, and verify the pressure switch settings. Also drain any condensation from the tank.
How often should I drain the tank?
Drain the tank after each use or daily to remove moisture and prevent rust. Use the drain valve at the bottom of the tank.
Can I use an extension cord with the WZK 180?
Yes, but use a heavy-duty cord rated for 15 amps at least. Keep the cord as short as possible to avoid voltage drop.
What is the maximum pressure for the WZK 180?
The maximum pressure is 8 bar (116 psi). Do not exceed this to avoid damage or injury.
How do I clean the air filter?
Remove the filter cover, take out the foam element, wash with mild soap and water, let it dry completely, and reinstall. Replace if damaged.
The compressor runs but does not stop. What should I do?
This indicates a faulty pressure switch. The switch should stop the motor at the preset cut-out pressure. Contact a qualified technician for replacement.
What safety precautions should I take?
Always wear safety goggles and hearing protection. Never point air jet at people or pets. Use in a well-ventilated area away from flammable materials.
Where can I find spare parts for the WZK 180?
Contact Workzone customer support or an authorized service center. You can also check online retailers for compatible parts.

User questions about WZK 180 Workzone

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Compressor in PDF format for free! Find your manual WZK 180 - Workzone and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WZK 180 by Workzone.

USER MANUAL WZK 180 Workzone

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Workzone

Model : WZK 180

Category : Compressor