TEG5328P - Switch Tenda - Free user manual and instructions
Find the device manual for free TEG5328P Tenda in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 28-Port Gigabit PoE+ Managed Switch |
| Brand | Tenda |
| Model | TEG5328P |
| Ports | 24 x 10/100/1000 Mbps PoE+ ports, 4 x 1000 Mbps SFP slots |
| PoE Budget | 370W (max per port 30W) |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.66 Mpps |
| Dimensions (W x D x H) | 440 x 190 x 44 mm (17.3 x 7.5 x 1.7 in) |
| Weight | 4.5 kg (9.9 lbs) |
| Power Supply | AC 100-240V, 50/60Hz, internal |
| Power Consumption | Max 400W (with PoE load) |
| Management | Web GUI, CLI, SNMP, VLAN, QoS, IGMP Snooping |
| Fan Type | Built-in fan, speed controlled |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 10% to 90% RH non-condensing |
| Mounting | Rackmount (brackets included) |
| Package Contents | Switch, power cord, rackmount kit, user manual, CD |
| Certifications | CE, FCC, RoHS |
| Warranty | 3 years limited warranty |
| Maintenance | Clean with dry cloth; avoid liquids; ensure ventilation |
| Safety | Use in dry indoor environment; do not overload power outlet |
| Spare Parts & Repair | No user-serviceable parts; contact Tenda support for repair |
Frequently Asked Questions - TEG5328P Tenda
How do I reset the TEG5328P switch to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds using a paperclip. The switch will reboot and restore factory settings.
What is the PoE budget of the TEG5328P?
The TEG5328P provides a total PoE budget of 370W, with up to 30W per port, supporting devices like IP cameras, VoIP phones, and wireless APs.
How can I access the web management interface?
Connect your computer to one of the switch ports, set an IP address in the same subnet (default switch IP is 192.168.0.1), open a browser and enter that IP. Default credentials: admin/admin.
Does the switch support VLAN configuration?
Yes, the TEG5328P supports 802.1Q VLAN with up to 4094 VLAN groups, allowing traffic segmentation per port or tag.
What type of SFP modules are compatible?
It accepts standard 1000BASE-SX/LX SFP modules (fiber) and 1000BASE-T SFP modules (copper). Use Tenda-compatible modules for best performance.
How do I troubleshoot if PoE devices are not powering on?
Check that the total PoE consumption does not exceed 370W. Verify cables and device compatibility. Try a different port. Access the web GUI to monitor PoE status and budget.
What is the switching capacity and forwarding rate?
The switching capacity is 56 Gbps and the forwarding rate is 41.66 Mpps for wire-speed Layer 2 switching.
Can I rack-mount the switch?
Yes, the switch includes rackmount brackets and fits a standard 19-inch rack. Ensure proper ventilation and clearance.
Does this switch support QoS?
Yes, it supports 802.1p priority and DSCP-based QoS, with 8 priority queues for traffic management.
Where can I download the user manual or firmware?
Visit the Tenda official website at www.tenda.com, search for TEG5328P, and download the latest user manual and firmware from the support section.
User questions about TEG5328P Tenda
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual TEG5328P - Tenda and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TEG5328P by Tenda.
USER MANUAL TEG5328P Tenda
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tenda
Model : TEG5328P
Category : Switch