DHI-VTO1210C-X-S - Intercom Dahua Technology - Free user manual and instructions
Find the device manual for free DHI-VTO1210C-X-S Dahua Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Door Station |
| Brand | Dahua Technology |
| Model | DHI-VTO1210C-X-S |
| Dimensions (H x W x D) | 130 x 90 x 30 mm |
| Weight | 0.3 kg |
| Power Supply | DC 12V from indoor monitor (2-wire) |
| Camera Resolution | 0.3 MP (VGA) |
| Viewing Angle | 130° horizontal |
| Night Vision | IR LEDs, up to 5m |
| Audio | Two-way talk with noise suppression |
| Call Button | 1 button with backlight |
| Protection Rating | IP54 (weatherproof), IK06 (impact) |
| Material | Aluminum alloy front panel |
| Operating Temperature | -30°C to +60°C |
| Key Features | Tamper alarm, RFID card support (optional), surface mount |
| Maintenance & Cleaning | Clean with a soft, dry cloth. Avoid liquids. |
| Safety | Tamper detection triggers alarm |
| Spare Parts & Repairability | Mounting bracket and screws included. Contact Dahua service for replacements. |
Frequently Asked Questions - DHI-VTO1210C-X-S Dahua Technology
How do I install the DHI-VTO1210C-X-S door station?
Mount the unit at a suitable height (approx. 1.5m) using the included bracket. Connect the 2-wire cable to the indoor monitor following polarity. Ensure weatherproof sealing. Refer to the manual for detailed wiring.
What is the maximum distance between door station and indoor monitor?
The maximum distance is typically 100 meters using 2-wire cable (0.5mm²). For longer runs, use thicker wire or an extension module.
Can I use the door station with multiple indoor monitors?
Yes, you can connect up to 3 indoor monitors in parallel. Each monitor must be compatible and wired correctly.
How do I adjust the camera angle?
The camera has a fixed angle inside the unit. To change the view, you may need to rotate the entire bracket by loosening the mounting screws. The horizontal angle is 130°.
What should I do if the door station is not powering on?
Check the 2-wire connection and ensure the indoor monitor is powered. Test voltage at the door station terminals (expect DC 12V). If still off, the unit may be defective.
Does the DHI-VTO1210C-X-S support RFID access?
Yes, it supports RFID card reading (125kHz) for door unlocking. You need to connect an external electric lock and configure the system.
How do I clean the door station?
Use a soft, dry cloth to wipe the surface. Do not use water or cleaning solvents. Regularly remove dust from the camera lens.
What is the night vision range?
The built-in IR LEDs provide visibility up to 5 meters in complete darkness. The image is monochrome in low light.
Can I answer the door from a smartphone?
No, this model is a standalone 2-wire system and does not support smartphone integration. It works only with compatible indoor monitors.
How do I perform a factory reset?
Press and hold the call button for 10 seconds until the LED flashes. This resets all settings to defaults. Note: This may affect paired monitors.
User questions about DHI-VTO1210C-X-S Dahua Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Intercom in PDF format for free! Find your manual DHI-VTO1210C-X-S - Dahua Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DHI-VTO1210C-X-S by Dahua Technology.
USER MANUAL DHI-VTO1210C-X-S Dahua Technology
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dahua Technology
Model : DHI-VTO1210C-X-S
Category : Intercom