DS-PS1-II-WE - Alarm system Hikvision - Free user manual and instructions
Find the device manual for free DS-PS1-II-WE Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Alarm System Control Panel |
| Brand | Hikvision |
| Model | DS-PS1-II-WE |
| Dimensions (H x W x D) | Approx. 150 mm x 110 mm x 30 mm |
| Weight | Approx. 0.3 kg |
| Power Supply | DC 12V / 1A (adapter included) |
| Backup Battery | Built-in rechargeable Li-ion battery (3.7V, 2000 mAh) |
| Wireless Protocol | Hikvision proprietary RF (433 MHz) |
| Supported Sensors | Up to 32 wireless detectors (door/window, PIR, smoke, etc.) |
| Alarm Output | Built-in siren (up to 110 dB), optional strobe light |
| Communication | Wi-Fi (2.4 GHz) for mobile app control; Ethernet optional |
| Mobile App | Hik-Connect (iOS/Android) for remote arming/disarming and alerts |
| Keypad | Built-in touch keypad with backlight |
| RFID Tags | Supports up to 10 RFID tags for arming/disarming |
| Tamper Protection | Anti-tamper switch on enclosure |
| Operating Temperature | -10°C to 55°C (14°F to 131°F) |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Maintenance | Clean with a soft dry cloth; avoid liquids; check battery status monthly |
| Security Features | AES-128 encryption for wireless communication; user PIN code |
| Spare Parts & Repairability | Battery and power adapter replaceable; other parts not user-serviceable. Contact Hikvision support. |
| Compliance | CE, FCC, RoHS |
| Warranty | 2 years (depending on region) |
Frequently Asked Questions - DS-PS1-II-WE Hikvision
How do I reset the DS-PS1-II-WE to factory defaults?
Press and hold the Reset button (located on the back) for 10 seconds until you hear a long beep. The system will reboot and all settings will be cleared.
Can I use the alarm system without a Wi-Fi connection?
Yes, the panel can operate in standalone mode. However, remote control via the Hik-Connect app and push notifications require Wi-Fi.
How do I add a new wireless sensor?
Enter the menu via the keypad, select Sensor Management, choose Add Sensor, then trigger the sensor (e.g., open the door/window) to pair. The panel will confirm with a beep.
What should I do if the alarm triggers accidentally?
Enter your PIN code on the keypad to silence the alarm. Check for any triggered sensors via the app or panel display. If false alarms persist, adjust sensor sensitivity.
How do I change the master PIN code?
Go to Menu > System Settings > PIN Code. Enter the current master PIN, then enter the new 4-6 digit code twice to confirm. Keep it secret.
Can I connect the panel to a wired network?
Yes, the DS-PS1-II-WE has an Ethernet port (RJ45) for wired connection. Plug in a cable and assign an IP address via the menu or DHCP.
What types of sensors are compatible?
All Hikvision wireless sensors using the 433 MHz protocol, including door/window contacts, PIR motion detectors, smoke detectors, and water leak sensors.
How long does the backup battery last?
The built-in battery provides approximately 8 hours of backup power during a mains outage, depending on usage and number of connected sensors.
How do I clean and maintain the panel?
Use a soft, dry cloth to wipe the surface. Do not use any liquids or sprays. Test the system monthly and replace the backup battery every 3-5 years.
Is it possible to disable the siren?
Yes, you can set the siren to Silent Mode from the menu or app. The alarm will still send notifications but will not sound.
User questions about DS-PS1-II-WE Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual DS-PS1-II-WE - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PS1-II-WE by Hikvision.