ND9542P - Surveillance Camera Vivotek - Free user manual and instructions
Find the device manual for free ND9542P Vivotek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Surveillance Camera |
| Model | ND9542P |
| Brand | Vivotek |
| Resolution | 2 Megapixels (1920x1080) |
| Lens | Motorized varifocal, 2.8~12mm |
| Field of View | Horizontal: 100°~30° |
| IR Distance | Up to 30 meters (98 ft) |
| Power Supply | PoE (802.3af) or DC 12V |
| Power Consumption | Max 12W |
| Dimensions (Ø x H) | Ø 70mm x 185mm |
| Weight | 0.6 kg (1.32 lb) |
| Ingress Protection | IP66 (weatherproof) |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Video Compression | H.265, H.264, MJPEG |
| Frame Rate | 30 fps at 1080p |
| Storage | MicroSD card slot (up to 256GB) |
| Network Interface | 10/100Mbps Ethernet |
| Main Functions | Motion detection, tampering alarm, ONVIF, two-way audio, day/night |
| Maintenance & Cleaning | Clean lens with soft dry cloth; avoid harsh chemicals; check connections periodically |
| Safety | Install per manufacturer instructions; use proper power supply; avoid exposure to extreme conditions |
| Spare Parts & Repairability | Contact Vivotek support for genuine parts; repair by qualified technicians only |
| General Information | Compliant with CE, FCC; includes mounting bracket and quick start guide |
Frequently Asked Questions - ND9542P Vivotek
How do I reset the Vivotek ND9542P to factory defaults?
Press and hold the reset button located near the Ethernet port for 10 seconds while the camera is powered on. The camera will reboot with default settings.
What is the default IP address of the ND9542P?
The default IP is 192.168.0.100. Alternatively, use Vivotek's VAST software or the Config Tool to discover the camera on the network.
How can I access the camera remotely?
Enable port forwarding on your router for ports 80 and 554 (RTSP), or use Vivotek's cloud service via VAST Cloud. Ensure you set a strong password for security.
What microSD card is supported?
The camera supports microSD, microSDHC, and microSDXC cards up to 256GB. Class 10 or UHS-I recommended for continuous recording.
How do I clean the camera lens?
Use a soft, lint-free cloth slightly dampened with water or a lens cleaning solution. Avoid abrasive materials that could scratch the lens.
Can I use PoE with a non-PoE switch?
Yes, you can use a PoE injector between the switch and the camera. The camera supports IEEE 802.3af PoE.
Why is the IR not working at night?
Check the camera settings: IR cut filter may be stuck or night mode disabled. Also ensure the IR LEDs are not obstructed by dirt or debris.
How do I update the firmware?
Download the latest firmware from Vivotek's website, then log into the camera web interface, go to System > Firmware Update, and upload the file. Do not power off during update.
What is the warranty period for the ND9542P?
Vivotek typically offers a 2-year limited warranty. Register your product on their website to extend warranty benefits.
Can I connect an external microphone?
Yes, the camera has a built-in microphone and also supports an external microphone via the audio input terminal (requires optional cable).
User questions about ND9542P Vivotek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual ND9542P - Vivotek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ND9542P by Vivotek.
USER MANUAL ND9542P Vivotek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vivotek
Model : ND9542P
Category : Surveillance Camera