Caple

PYR600 - Basket Caple - Free user manual and instructions

Find the device manual for free PYR600 Caple in PDF.

📄 20 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Caple PYR600 - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Under-cabinet extractor hood
Brand Caple
Model PYR600
Width 600 mm
Depth 500 mm
Height (min-max) 150 - 250 mm
Weight 15 kg
Power supply 220-240 V, 50 Hz
Maximum extraction rate 600 m³/h
Noise level (max) 65 dB(A)
Number of speeds 3
Lighting LED, 2 x 1.5 W
Grease filter Aluminum, washable
Charcoal filter Optional, for recirculation mode
Duct diameter 150 mm
Energy class A+
Control type Electronic push buttons
Maintenance Clean grease filter monthly; replace charcoal filter every 3-6 months
Safety features Thermal cut-out, motor overload protection
Spare parts availability Filters, LED lamps, control board available from Caple service
Repairability index 8.5/10

Frequently Asked Questions - PYR600 Caple

How do I install the Caple PYR600 extractor hood?
Installation should be performed by a qualified electrician. Ensure the hood is mounted at least 65 cm above electric hobs and 75 cm above gas hobs. Follow the user manual for wall fixing and duct connection.
How often should I clean the grease filter?
The aluminum grease filter should be cleaned monthly in a dishwasher or by hand with warm soapy water. Dry thoroughly before reinserting.
Can I use the hood without a charcoal filter?
Yes, if the hood is connected to an external duct (extraction mode). The charcoal filter is only needed for recirculation mode to absorb odors.
Why is my hood noisy?
Check if the grease filter is dirty or if there is an obstruction in the duct. Normal noise level at max speed is 65 dB(A). If excessive, contact Caple support.
How do I replace the LED lamps?
Disconnect power. Remove the lamp cover and pry out the LED module. Insert a new 1.5 W LED of the same type and secure the cover. For details, see the manual.
What does the thermal cut-out do?
The thermal cut-out automatically switches off the motor if it overheats, preventing damage. Wait 15 minutes for the motor to cool before restarting.
Can I use a longer duct than specified?
Using a longer duct reduces extraction efficiency. Maximum recommended length is 4 meters with two 90° bends. Use smooth pipes.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the speed button for 3 seconds until the indicator light turns off.
Is the hood compatible with a remote control?
No, this model does not include a remote control. It is operated via electronic push buttons on the front panel.
Where can I purchase spare parts?
Spare parts such as filters, lamps, and control boards are available from Caple authorized service centers or online via the Caple website.

User questions about PYR600 Caple

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Basket in PDF format for free! Find your manual PYR600 - Caple and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PYR600 by Caple.

USER MANUAL PYR600 Caple

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Caple

Model : PYR600

Category : Basket