DS-3E1524-EI - Switch Hikvision - Free user manual and instructions
Find the device manual for free DS-3E1524-EI Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch |
| Model | DS-3E1524-EI |
| Brand | Hikvision |
| Port Configuration | 24 x Gigabit Ethernet (10/100/1000) + 4 x SFP |
| PoE Support | Yes, PoE+ (802.3at/af) with total power budget up to 370W |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.66 Mpps |
| MAC Address Table | 16K entries |
| Management | Web GUI, CLI, SNMP v1/v2c/v3, RMON |
| VLAN Features | 802.1Q VLAN, up to 4096 VLANs |
| Quality of Service | 802.1p, DSCP, queue scheduling |
| Dimensions (W x D x H) | 440 x 240 x 44 mm (1U) |
| Weight | 3.5 kg (7.7 lbs) |
| Power Supply | 100-240V AC, 50/60 Hz, internal |
| Power Consumption | Max 400W (including PoE) |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Safety Features | CE, FCC, RoHS, surge protection |
| Maintenance | Clean with soft dry cloth; avoid liquids and solvents |
| Spare Parts & Repairability | Contact Hikvision support for replacement; not user-serviceable |
Frequently Asked Questions - DS-3E1524-EI Hikvision
How do I access the web management interface?
Connect your computer to one of the switch ports. Set your PC IP to 192.168.1.x (subnet 255.255.255.0). Open a browser and go to the default IP 192.168.1.1. Login with default credentials: admin/admin.
How to configure VLANs on the DS-3E1524-EI?
Go to the web GUI under VLAN > 802.1Q VLAN. Create a new VLAN ID and assign tagged/untagged ports. Apply changes and save the configuration to make it persistent.
Does this switch support PoE? What is the power budget?
Yes, it supports PoE+ (IEEE 802.3at/af) on all 24 ports. The total PoE power budget is 370W, allowing up to 30W per port.
How to reset the switch to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until all LEDs blink. Release the button; the switch will reboot with factory settings.
How to update the firmware?
Download the latest firmware from the Hikvision website. In the web GUI, go to Maintenance > Firmware Upgrade. Select the file and click Upgrade. Do not power off during the process.
What is the default IP address and login?
The default IP is 192.168.1.1, subnet mask 255.255.255.0. Default username is admin and password is admin (or blank on some models). Change it immediately for security.
Can I use this switch for IP camera networks?
Yes, it is ideal for IP camera systems. With PoE+ and gigabit ports, it supports up to 24 cameras. Use VLAN to separate video traffic from data.
How to enable SNMP for network monitoring?
Go to Management > SNMP. Enable SNMP, set community strings (e.g., public/private), and configure trap destinations. Supports SNMP v1/v2c/v3.
What are the LED indicators on the front panel?
Each port has two LEDs: Link/Act (green for link, blinking for activity) and PoE (amber if powered). The Power LED is solid green when on, and System LED blinks during boot.
How to troubleshoot no network connectivity?
Check that the power LED is on. Verify cable connections and try a different port. Ensure the device IP is in the same subnet. If using VLAN, confirm port membership. Try a factory reset if needed.
User questions about DS-3E1524-EI Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual DS-3E1524-EI - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-3E1524-EI by Hikvision.
USER MANUAL DS-3E1524-EI Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-3E1524-EI
Category : Switch