XDM1241 - Measuring equipment Owon - Free user manual and instructions
Find the device manual for free XDM1241 Owon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Owon |
| Model | XDM1241 |
| Display | LCD, 1999 counts (3 1/2 digit) |
| DC Voltage | 200mV/2V/20V/200V/600V ±(0.5%+2) |
| AC Voltage | 200mV/2V/20V/200V/600V ±(1%+5) |
| DC Current | 200μA/2mA/20mA/200mA/10A ±(0.8%+2) |
| AC Current | 200μA/2mA/20mA/200mA/10A ±(1.2%+5) |
| Resistance | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ ±(0.8%+3) |
| Capacitance | 20nF/200nF/2μF/20μF/200μF ±(3%+10) |
| Frequency | 20kHz/200kHz ±(1.5%+5) |
| Diode Test | Yes |
| Continuity Test | Yes (buzzer) |
| Data Hold | Yes |
| Backlight | Yes |
| Input Impedance | 10 MΩ |
| Safety Rating | CAT II 600V |
| Power Source | 2 × AAA batteries |
| Dimensions (L×W×H) | 135 × 72 × 35 mm |
| Weight | Approx. 150 g (including batteries) |
| Accessories | Test leads, user manual, batteries |
| Maintenance | Wipe with a dry cloth; store in a dry environment |
| Repairability | Spare parts available through authorized service centers |
Frequently Asked Questions - XDM1241 Owon
How do I measure DC voltage with the Owon XDM1241?
Set the rotary switch to the V DC position. Connect the black test lead to COM and red to VΩHz. Touch the probes to the circuit. Read the value on the LCD.
What is the maximum voltage this multimeter can measure?
The XDM1241 can measure up to 600V DC or AC in the highest range. Do not exceed the rated CAT II 600V safety limit.
How do I test continuity?
Turn the dial to the continuity/ diode position. Connect probes as usual. If resistance is less than about 50Ω, the buzzer will sound.
What type of batteries does the XDM1241 use?
It uses 2 AAA 1.5V batteries. Replace when the low battery indicator appears.
Can I measure AC current?
Yes, set the rotary switch to an AC current range (200μA to 10A). Insert the red lead into the 10A or mA jack accordingly. Do not exceed 10A for more than 10 seconds.
How do I use the data hold function?
Press the HOLD button to freeze the current reading on the display. Press again to release.
What is the input impedance for voltage measurements?
The input impedance is 10 MΩ, which minimizes loading effect on the circuit.
How do I measure capacitance?
Turn the dial to the capacitance mode (F). Connect the test leads to the capacitor (observe polarity for electrolytic caps). Wait for the reading to stabilize.
Is the XDM1241 safe for electrical work?
Yes, it is rated CAT II 600V, suitable for measurements on circuits directly connected to the mains (e.g., household appliances). Always follow standard safety precautions.
How do I clean the multimeter?
Use a soft, dry cloth to wipe the case and display. Do not use solvents or abrasives. Keep it dry and dust-free when not in use.
User questions about XDM1241 Owon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual XDM1241 - Owon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XDM1241 by Owon.
USER MANUAL XDM1241 Owon
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Owon
Model : XDM1241
Category : Measuring equipment