PMAX-1013 - Uncategorized ACTi - Free user manual and instructions
Find the device manual for free PMAX-1013 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Model | PMAX-1013 |
| Brand | ACTi |
| Resolution | 1.3 Megapixels (1280 x 1024) |
| Dimensions (L x W x H) | 70 mm x 60 mm x 120 mm |
| Weight | 300 g |
| Power Supply | PoE (Power over Ethernet) IEEE 802.3af |
| Power Consumption | 5 W typical |
| Lens Type | Fixed focal, 3.6 mm |
| Night Vision | Built-in IR LEDs up to 10 m |
| Video Compression | H.264, MJPEG |
| Network Interface | 10/100 Base-T Ethernet |
| Supported Protocols | TCP/IP, DHCP, HTTP, RTSP, FTP, SMTP |
| Mount Type | Wall or ceiling mount |
| Operating Temperature | -10°C to 50°C |
| Humidity | 10% to 90% non-condensing |
| Ingress Protection | IP66 (weatherproof) |
| Main Functions | Motion detection, video streaming, remote access, recording to NAS |
| Care and Cleaning | Wipe gently with a soft, dry cloth. Do not use abrasive cleaners. |
| Safety Precautions | Use only approved PoE injector. Do not expose to rain or moisture. Keep away from heat sources. |
| Spare Parts and Repairability | No user-serviceable parts. Contact ACTi support for repairs. |
| Certifications | CE, FCC, RoHS |
Frequently Asked Questions - PMAX-1013 ACTi
How do I reset the ACTi PMAX-1013 to factory defaults?
To reset the camera, press and hold the reset button (located on the back panel) for 10 seconds using a paperclip. The camera will reboot with factory settings.
How can I access the camera remotely?
Assign a static IP address to the camera via its web interface, then configure port forwarding on your router. Use the ACTi CMS software or a web browser to view the feed.
What is the default IP address and login?
The default IP is 192.168.0.100. Default username is 'admin' and password is '123456' (or blank). Check the label on the device for exact details.
Does the PMAX-1013 support PoE?
Yes, it supports Power over Ethernet (PoE) IEEE 802.3af. You can power the camera using a PoE switch or injector.
What is the maximum resolution and frame rate?
The camera supports up to 1.3 megapixels (1280x1024) at 30 frames per second. Lower resolutions can achieve higher frame rates.
Can I use the camera without an internet connection?
Yes, the camera can operate on a local network. Use ACTi NVR or CMS software to record and view footage without internet access.
How do I mount the camera?
The camera comes with a mounting bracket. Drill holes according to the template, use appropriate anchors, and secure the bracket before attaching the camera.
What is the night vision range?
The built-in IR LEDs provide night vision up to 10 meters (33 feet) in complete darkness.
Is the camera weatherproof?
Yes, the PMAX-1013 has an IP66 rating, making it suitable for outdoor use. It is protected against dust and water jets.
Where can I download the user manual?
You can download the manual from the ACTi website support section or from notice-facile.com by entering the model number.
User questions about PMAX-1013 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PMAX-1013 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PMAX-1013 by ACTi.
USER MANUAL PMAX-1013 ACTi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACTi
Model : PMAX-1013
Category : Uncategorized