RSX-1562 - Receiver ROTEL - Free user manual and instructions
Find the device manual for free RSX-1562 ROTEL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Receiver |
| Brand | Rotel |
| Model | RSX-1562 |
| Dimensions (W x H x D) | 17.3 x 6.2 x 15.4 inches (440 x 158 x 391 mm) |
| Weight | 28.7 lbs (13 kg) |
| Power Output | 100 watts per channel (8 ohms, 20 Hz - 20 kHz, THD < 0.02%) |
| Audio Formats | Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus, DTS 96/24 |
| HDMI Inputs | 4 (version 1.4a) |
| HDMI Output | 1 with ARC |
| Analog Audio Inputs | 5 RCA pairs, 1 phono (MM) |
| Digital Audio Inputs | 2 optical, 2 coaxial |
| Speaker Impedance | 4 - 8 ohms |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Signal-to-Noise Ratio | 100 dB (IHF A-weighted) |
| Power Consumption | 500 W (standby: <0.5 W) |
| Remote Control | Included (RR-AT97) |
| FM Tuner | Yes, with RDS |
| AM Tuner | Yes |
| Headphone Output | 1/4 inch (6.35 mm) jack |
| Maintenance & Cleaning | Use dry cloth; do not use solvents; keep vents clean |
| Safety Features | Overload protection, thermal shutdown, muting circuit |
| Spare Parts & Repairability | Contact authorized service centers; parts available for 7 years |
Frequently Asked Questions - RSX-1562 ROTEL
How do I connect my speakers to the RSX-1562?
Use speaker cables with banana plugs or bare wire. Connect to the corresponding binding posts on the rear panel, ensuring correct polarity (red to positive, black to negative).
Can I use the RSX-1562 with a turntable?
Yes, the receiver has a dedicated phono input for moving magnet (MM) cartridges. Connect your turntable's ground wire to the grounding terminal.
How do I set up the FM/AM tuner?
Connect the supplied FM or AM antenna. Press Tuner on the remote, then use Auto Tuning to scan for stations. You can store presets using the memory button.
My receiver turns off unexpectedly. What could be wrong?
This may be due to thermal overload. Ensure vents are not blocked and the receiver has adequate airflow. Also check speaker impedance (minimum 4 ohms).
How do I update the firmware?
Rotel RSX-1562 does not support user-updatable firmware. Updates, if any, must be performed by an authorized service center.
What audio formats does the RSX-1562 support?
It supports Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus, DTS 96/24, and standard PCM up to 24-bit/96 kHz.
Can I control the receiver with a universal remote?
Yes, the RSX-1562 uses IR codes that can be learned by many universal remotes. Rotel's remote codes are available in the manual.
How do I reset the receiver to factory settings?
Press and hold the Power button on the front panel for 5 seconds while the unit is in standby mode. Display will show 'Reset' when done.
What is the maximum power consumption?
The maximum power consumption is 500 W during normal operation. Standby consumption is less than 0.5 W.
Does the RSX-1562 support Bi-amping?
Yes, the receiver supports bi-amping for the front speakers. You need to assign surround back channels to Front B in the setup menu.
User questions about RSX-1562 ROTEL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual RSX-1562 - ROTEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RSX-1562 by ROTEL.
USER MANUAL RSX-1562 ROTEL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ROTEL
Model : RSX-1562
Category : Receiver