VX3500 - Bass Amplifier Hartke - Free user manual and instructions
Find the device manual for free VX3500 Hartke in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bass Amplifier Head |
| Brand | Hartke |
| Model | VX3500 |
| Power Output | 350W at 4 ohms |
| Dimensions (HxWxD) | 5.25" x 19" x 10" (3U rack mount) |
| Weight | 15.5 lbs (7 kg) |
| Power Supply | AC 100-240V, 50-60Hz |
| Inputs | 1/4" instrument input, 1/4" effects return |
| Outputs | 1/4" speaker output (4 ohm min), XLR DI out, 1/4" line out, 1/4" effects send, headphone out |
| Equalization | 10-band graphic EQ for precise tone shaping |
| Built-in Effects | Limiter, drive, compressor |
| Controls | Volume, drive, compressor, limiter, EQ sliders, master volume |
| Connectivity | Effects loop (send/return), footswitch jack |
| Cooling | Internal fan for heat dissipation |
| Construction | Steel chassis with rugged rack ears |
| Maintenance | Clean with a dry, lint-free cloth. Avoid liquids and abrasives. |
| Safety | Use only with grounded outlet. Do not expose to rain or moisture. Refer to manual for full safety instructions. |
| Spare Parts | Contact Hartke authorized service centers for replacement parts. |
| Repairability | Serviceable by qualified technicians. Do not open unit yourself. |
| General Information | Professional bass amplification for stage and studio. Known for clean power and tonal flexibility. |
Frequently Asked Questions - VX3500 Hartke
What is the power output of the Hartke VX3500?
The Hartke VX3500 delivers 350 watts at 4 ohms, providing ample power for most bass applications.
Can I use the VX3500 with an 8-ohm cabinet?
Yes, the VX3500 can drive 8-ohm cabinets, but power output will be reduced (approximately 200W). For maximum performance, use a 4-ohm load.
How do I connect the VX3500 to a mixing board?
Use the XLR DI output to connect directly to a mixing console. This output provides a balanced signal with ground lift switch to reduce hum.
Does the VX3500 have an effects loop?
Yes, it features a serial effects loop with send and return jacks, allowing you to integrate external effects pedals or processors.
What is the best way to clean the amplifier?
Unplug the unit and wipe the exterior with a dry, soft cloth. Do not use any liquids, sprays, or abrasive cleaners.
How do I set the limiter on the VX3500?
Turn the limiter knob clockwise to increase limiting. Start with the knob fully counterclockwise (off) and gradually adjust until you hear the desired compression without audible distortion.
What type of speakers can I use with this amp?
Use speakers with a total impedance of 4 ohms minimum. The amplifier is designed for standard bass cabinets with a power handling of at least 350W.
Can I use the headphone output without a speaker connected?
No, you must always connect a speaker load to the speaker output when the amplifier is on, even when using headphones. Otherwise, the amplifier may be damaged.
How do I adjust the 10-band EQ?
Use the sliders to boost or cut frequencies from 40Hz to 10kHz. Start with all sliders centered, then adjust to taste. Extreme settings may cause feedback.
Where can I find the user manual?
The user manual is available for free download at notice-facile.com in PDF format. You can also request a translated version via email.
User questions about VX3500 Hartke
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Bass Amplifier in PDF format for free! Find your manual VX3500 - Hartke and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VX3500 by Hartke.
USER MANUAL VX3500 Hartke
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hartke
Model : VX3500
Category : Bass Amplifier