PAR 64 LED-100Z-56 - Lighting Showtec - Free user manual and instructions
Find the device manual for free PAR 64 LED-100Z-56 Showtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED PAR Can |
| Model | PAR 64 LED-100Z-56 |
| Brand | Showtec |
| Light Source | 100W LED (RGBW or RGB, not specified) |
| Beam Angle | 25° (typical for PAR 64) |
| DMX Channels | 4-8 channels depending on mode |
| Control | DMX512, Master/Slave, Sound-activated, Standalone |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 100W |
| Dimensions (L x W x H) | 290 x 250 x 250 mm |
| Weight | 5.5 kg |
| Housing Material | Aluminum |
| IP Rating | IP20 (indoor use only) |
| Cooling | Convection (no fan) |
| Functions | Dimming, strobe, color mixing, static colors, auto programs |
| Mounting | Floor standing or hanging via omega bracket |
| Maintenance | Clean lens with soft, damp cloth; avoid solvents |
| Safety | Use on stable surface; disconnect power before cleaning; keep away from moisture |
| Spare Parts Available | LED module, power supply, control board |
| Manual Included | Yes, 24 pages in English and other languages |
Frequently Asked Questions - PAR 64 LED-100Z-56 Showtec
How do I reset the fixture to factory defaults?
Press and hold the Menu button for 3 seconds while the unit is powered on. Then select 'Factory Reset' from the menu and confirm.
Can I use this light outdoors?
No, the IP20 rating means it is only suitable for indoor use. It is not protected against water or dust ingress.
How many DMX channels does it use?
Depending on the selected mode, it can use 4 to 8 channels. Refer to the manual for channel assignments.
What is the beam angle of the PAR 64 LED-100Z-56?
The beam angle is approximately 25 degrees, typical for a PAR 64 lens.
How do I replace the fuse?
Disconnect the power, open the fuse holder next to the power input, and replace the blown fuse with one of the same rating (2A 250V).
Can I control multiple units together without a DMX controller?
Yes, use Master/Slave mode. Connect units with DMX cables, set one as Master and others as Slave, then the Master will control the slaves.
What is the maximum ambient temperature for operation?
The maximum ambient temperature is 40°C (104°F). Do not operate in hotter conditions to avoid overheating.
How do I clean the lens?
Use a soft, lint-free cloth slightly dampened with water. Do not use alcohol or harsh chemicals.
Does the fixture support sound activation?
Yes, it has a built-in microphone for sound-activated programs. Set the mode to 'Sound' and adjust sensitivity via menu.
What is the weight of the fixture?
The fixture weighs approximately 5.5 kg (12.1 lbs).
User questions about PAR 64 LED-100Z-56 Showtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual PAR 64 LED-100Z-56 - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PAR 64 LED-100Z-56 by Showtec.
USER MANUAL PAR 64 LED-100Z-56 Showtec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Showtec
Model : PAR 64 LED-100Z-56
Category : Lighting