DS-PDQP15AM-LM-WE - Alarm system Hikvision - Free user manual and instructions
Find the device manual for free DS-PDQP15AM-LM-WE Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hikvision |
| Model | DS-PDQP15AM-LM-WE |
| Category | Alarm System |
| Product Type | Wireless Motion Detector |
| Dimensions (approx.) | 110 x 65 x 45 mm |
| Weight (approx.) | 100 g |
| Power Supply | CR123A 3V battery |
| Detection Technology | Passive Infrared (PIR) |
| Detection Range | Up to 12 m |
| Detection Angle | 90° |
| Wireless Protocol | Hikvision proprietary / 868 MHz |
| Communication Range | Up to 100 m open area |
| Tamper Protection | Yes (anti-tamper switch) |
| Operational Temperature | -10°C to +50°C |
| Mounting | Wall or ceiling mount |
| LED Indicator | Alarm and status indicator |
| Battery Life (approx.) | Up to 2 years |
| Compliance | CE, RoHS |
| Maintenance | Clean with dry cloth; replace battery when low |
| Spare Parts | CR123A battery |
| Repairability | Battery replaceable by user |
Frequently Asked Questions - DS-PDQP15AM-LM-WE Hikvision
How do I install the DS-PDQP15AM-LM-WE motion detector?
Mount the detector on a wall or ceiling using the included bracket. Ensure the lens is not obstructed. Insert the CR123A battery and pair it with your Hikvision alarm system following the pairing instructions.
What is the detection range of this detector?
The recommended detection range is up to 12 meters with a 90° detection angle.
How do I pair the detector with my alarm panel?
Refer to your alarm panel manual. Typically, you need to put the panel into pairing mode and then trigger the detector once by walking in front of it. The LED will indicate successful pairing.
What type of battery does it use?
It uses one CR123A 3V lithium battery. Battery life can last up to 2 years under normal use.
How do I know if the battery is low?
The LED indicator will flash rapidly, or your alarm panel may show a low battery signal for that device.
Can I use this detector outdoors?
No, this model is designed for indoor use only. Exposure to moisture or extreme temperatures may damage it.
What should I do if the detector is not triggering?
Check the battery, ensure the lens is clean, and verify the detector is not mounted too high or behind obstacles. Also confirm it is within range of the alarm panel.
Does the detector have tamper protection?
Yes, it includes a tamper switch that triggers an alarm if the cover is removed or the device is forcibly detached from its mount.
How do I clean the motion detector?
Use a soft, dry cloth to wipe the exterior. Do not use water or cleaning agents on the lens. Avoid touching the sensor directly.
Can I replace the battery myself?
Yes, the battery is user-replaceable. Open the compartment, replace with a new CR123A, and close securely. No tools required.
User questions about DS-PDQP15AM-LM-WE Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual DS-PDQP15AM-LM-WE - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PDQP15AM-LM-WE by Hikvision.
USER MANUAL DS-PDQP15AM-LM-WE Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-PDQP15AM-LM-WE
Category : Alarm system