ICS-115A - Server Planet - Free user manual and instructions
Find the device manual for free ICS-115A Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rackmount Server |
| Dimensions (W x D x H) | 440 x 400 x 44 mm (1U) |
| Weight | 8 kg |
| Power Supply | Dual hot-swappable 550W power supplies |
| Main Functions | Data processing, network storage, virtualization support |
| Maintenance & Cleaning | Clean with compressed air; keep vents clear of dust |
| Safety | Use antistatic wrist strap; ensure proper grounding |
| Spare Parts & Repairability | Hard drives, RAM modules, fans, power supplies (all hot-swappable) |
| General Information | Supports Intel Xeon processors; multiple expansion slots |
Frequently Asked Questions - ICS-115A Planet
What is the default administrator password for the server?
The default administrator password is typically set to admin or password. For security, change it immediately after first login.
How do I reset the server to factory settings?
To reset to factory settings, press and hold the reset button on the front panel for 10 seconds, or use the management interface to perform a factory reset.
What operating systems are compatible?
The server supports Windows Server, Linux (Ubuntu, CentOS, Red Hat), and ESXi hypervisors. Check the compatibility list for specific versions.
How do I install additional memory?
Open the chassis, locate the DIMM slots, align the notch on the RAM module with the slot, and press firmly until the clips snap into place. Ensure the memory is compatible.
What RAID levels are supported?
The onboard RAID controller supports RAID 0, 1, 5, and 10 depending on the number of drives. Configure RAID via the BIOS or management utility.
How do I update the firmware?
Download the latest firmware from the official Planet website, upload it via the management interface or bootable USB, and follow the on-screen instructions. Do not power off during update.
Why is the server overheating?
Check for blocked vents, faulty fans, or high ambient temperature. Ensure all fan modules are spinning and the air filters are clean. Consider lowering the room temperature.
How can I access the remote management console?
Connect to the server's IPMI/IPMI port using a web browser with the default IP address 192.168.1.1. Use the provided admin credentials to access the remote console.
What are the LED indicators on the front panel?
The front panel has power (green), disk activity (blinking green), network activity (blinking green), and fault (amber) LEDs. Refer to the manual for detailed status descriptions.
How do I replace a failed hard drive?
Identify the failed drive via the fault LED (amber). Hot-swap the drive by pressing the release latch, pulling out the tray, inserting a new compatible drive, and securing it. The RAID will rebuild automatically.
User questions about ICS-115A Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual ICS-115A - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ICS-115A by Planet.
USER MANUAL ICS-115A Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : ICS-115A
Category : Server