SXT R - Uncategorized Mikrotik - Free user manual and instructions
Find the device manual for free SXT R Mikrotik in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Outdoor Wireless CPE |
| Brand | MikroTik |
| Model | SXT R |
| Frequency Band | 2.4 GHz |
| Wireless Standard | 802.11 b/g/n |
| Maximum Throughput | 300 Mbps |
| Antenna Gain | 13 dBi |
| Transmit Power | 26 dBm |
| Interface | 1 x 10/100 Ethernet (PoE in) |
| Power Supply | PoE 18-28V DC |
| Power Consumption | 6 W typical |
| Operating Temperature | -40°C to +70°C |
| Dimensions | 135 x 135 x 35 mm |
| Weight | 150 g |
| Mounting | Pole or wall mount kit included |
| IP Rating | IP54 |
| Security | WPA2, WPA3, MAC filtering |
| Regulatory Certifications | CE, FCC, IC |
| Operating System | MikroTik RouterOS |
| Warranty | 1 year |
Frequently Asked Questions - SXT R Mikrotik
How do I reset the MikroTik SXT R to factory defaults?
To reset the device, press and hold the reset button (located on the back near the Ethernet port) while powering it on. Hold for about 10 seconds until the LED starts flashing. Release the button; the device will reboot with factory settings.
What is the default IP address for the SXT R?
The default IP address is 192.168.88.1 with username 'admin' and no password. You can access the web interface via a browser after connecting to the device's LAN port.
Can I use the SXT R as a bridge?
Yes, the SXT R can be configured as a wireless bridge. In RouterOS, set up a bridge interface and add the Ethernet and wireless interfaces to the bridge. Disable NAT and DHCP server if not needed.
How do I update the firmware on my SXT R?
Download the latest RouterOS firmware from the MikroTik website. Upload the .npk file via the web interface (Files) or use Winbox. Then go to System > Reboot and reboot to apply. Alternatively, use the 'System > RouterBOARD > Upgrade' function if an internet connection is available.
What is the maximum range of the SXT R?
The range depends on environmental factors and antenna alignment. With its 13 dBi antenna, it can achieve up to 5-10 km line-of-sight in optimal conditions. Actual performance may vary.
How do I mount the SXT R outdoors?
Use the included pole mounting kit. Attach the bracket to the device using the provided screws. Secure the bracket to a pole (diameter 25-70 mm) using the hose clamps. Ensure the device is oriented vertically with the connector pointing downwards for weather protection.
Can I power the SXT R via PoE?
Yes, the SXT R supports Power over Ethernet (PoE) with voltage range 18-28V DC. Use the included PoE injector or a compatible switch. The Ethernet port is the only power input.
How do I configure the SXT R as a client accessing a remote AP?
Set the wireless mode to 'station'. Scan for the desired AP and connect. Assign an IP address to the Ethernet interface (e.g., via DHCP client) or set a static IP. Optionally, configure NAT to share the connection.
What does the LED status mean?
The LED indicates system status: solid green means power on and booted; flashing green indicates activity; red indicates an error or low signal strength. Check the manual for exact pattern definitions.
Is the SXT R waterproof?
The SXT R has an IP54 rating, meaning it is protected against dust and water splashes. It is suitable for outdoor use but should not be submerged. Ensure the Ethernet port is sealed with the provided rubber cap when not in use.
User questions about SXT R Mikrotik
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SXT R - Mikrotik and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SXT R by Mikrotik.