ADDERLink X2-Silver DA - Audio/video extension Adder - Free user manual and instructions
Find the device manual for free ADDERLink X2-Silver DA Adder in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Audio/video extender |
| Model | ADDERLink X2-Silver DA |
| Brand | Adder |
| Product category | DVI dual link extender |
| Dimensions (transmitter) | 4.5 x 2.5 x 1.0 in (114 x 64 x 25 mm) |
| Weight (transmitter) | 0.5 lb (227 g) |
| Power supply | 5V DC, 2A external adapter |
| Video input/output | DVI-D (dual link) |
| Max resolution | 2560 x 1600 @ 60 Hz |
| Max transmission distance | 328 ft (100 m) via Cat5e/6 |
| Connectivity | RJ45 for link, DVI for video |
| Supported video modes | Single link and dual link DVI |
| Audio support | No (video only) |
| EDID management | Local EDID storage |
| Operating temperature | 32°F to 104°F (0°C to 40°C) |
| Storage temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 20% to 80% non-condensing |
| ESD protection | ±15kV air, ±8kV contact |
| Maintenance | Keep dry, clean with soft cloth; no liquids |
| Safety precautions | Use only supplied power adapter, avoid bending cables sharply |
| Repairability | No user-serviceable parts; contact Adder for support |
| Included accessories | Transmitter, receiver, 2 power adapters, user manual |
Frequently Asked Questions - ADDERLink X2-Silver DA Adder
What is the maximum resolution supported by the ADDERLink X2-Silver DA?
The ADDERLink X2-Silver DA supports resolutions up to 2560x1600 at 60 Hz when using dual-link DVI.
Can the extender transmit audio?
No, the ADDERLink X2-Silver DA is a video-only extender. It does not pass audio signals.
What type of cable is required for connection?
You need a Cat5e or Cat6 Ethernet cable (straight-through) to connect the transmitter and receiver. Shielded cable is recommended for longer runs.
What is the maximum distance between transmitter and receiver?
The extender can transmit video up to 328 feet (100 meters) over a single Cat5e/6 cable.
Do I need separate power supplies for both units?
Yes, both the transmitter and receiver require their own 5V DC, 2A power adapters (included).
How do I set up the extender?
Connect the DVI source to the transmitter, the display to the receiver, and link them with a Cat5e/6 cable. Power on both units. EDID is handled automatically.
What does EDID management do?
The extender stores the display's EDID to ensure the source outputs the correct resolution. This prevents signal loss or incorrect timing.
Is the extender compatible with dual-link DVI?
Yes, it supports both single-link and dual-link DVI signals. For dual-link, use a DVI-D dual-link cable at both ends.
Can I use this extender with a KVM switch?
Yes, you can connect the transmitter to a KVM switch's DVI output, but ensure the switch supports the same resolution and signal type.
What should I do if there is no video output?
Check the cable connections, ensure power adapters are plugged in, and verify the DVI source is outputting a supported resolution. Reset both units if needed.
User questions about ADDERLink X2-Silver DA Adder
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/video extension in PDF format for free! Find your manual ADDERLink X2-Silver DA - Adder and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADDERLink X2-Silver DA by Adder.
USER MANUAL ADDERLink X2-Silver DA Adder
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Adder
Model : ADDERLink X2-Silver DA
Category : Audio/video extension