ZLX-8-G2 - Uncategorized ELECTRO-VOICE - Free user manual and instructions
Find the device manual for free ZLX-8-G2 ELECTRO-VOICE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Loudspeaker |
| Woofer | 8" (203 mm) with high-temperature voice coil |
| Tweeter | 1" (25 mm) titanium compression driver |
| Amplifier Power | Class-D, 1200 W peak |
| Frequency Response | 65 Hz – 20 kHz (-3 dB) |
| Maximum SPL | 126 dB peak |
| Coverage | 90° x 60° nominal |
| Inputs | 2x XLR/TRS combo, 1x RCA stereo |
| Outputs | 1x XLR mix out |
| Bluetooth | Built-in Bluetooth 5.0 for audio streaming |
| DSP Presets | 4 user-selectable presets: Live, Music, Speech, Club |
| Controls | Master volume, Input 1/2 gain, Bluetooth toggle, Preset selector |
| Indicators | Power, Signal, Limiter, Bluetooth LED |
| Enclosure | Polypropylene, textured black |
| Rigging | 1x 1.5" pole mount, 2x M10 suspension points, 4x rubber feet |
| Dimensions (W x H x D) | 11.8" x 18.5" x 9.8" (300 x 470 x 250 mm) |
| Weight | 14.6 kg (32.2 lbs) |
| Power Supply | 100-240 VAC, 50/60 Hz, 1.5 A |
| Power Consumption | 150 W typical |
| Recommended Crossover | Active crossover with built-in protection |
| Warranty | 2 years limited |
| Cleaning | Wipe with dry cloth; do not use solvents |
| Safety | Overload, thermal, and limiter protection |
Frequently Asked Questions - ZLX-8-G2 ELECTRO-VOICE
How do I connect a Bluetooth device to the ZLX-8-G2?
Press the Bluetooth button on the rear panel. The LED will blink. On your phone or tablet, search for 'EV ZLX-8-G2' and pair. The LED will become solid when connected.
Can I use the ZLX-8-G2 as a floor monitor?
Yes, the enclosure is trapezoidal and can be placed on its side as a wedge monitor. Use the rubber feet on the appropriate side.
How do I reset the speaker to factory settings?
Press and hold the Preset button while powering on the unit. Hold for 5 seconds until all LEDs flash. This resets to default DSP settings.
What is the maximum SPL of the ZLX-8-G2?
The maximum peak SPL is 126 dB, measured at 1 meter.
Can I daisy-chain multiple ZLX-8-G2 speakers?
Yes, use the Mix Out XLR output to connect to the input of another powered speaker. Ensure the second speaker is set to Line level.
What types of cables are needed for connection?
Use XLR or 1/4' TRS cables for microphones or line-level sources. For Bluetooth, no cables needed. For power, use the included IEC power cord.
How do I change the DSP preset?
Press the Preset selector button repeatedly to cycle through Live, Music, Speech, and Club. The corresponding LED will light up.
Is the ZLX-8-G2 suitable for outdoor use?
The speaker is not weatherproof. Protect it from rain and moisture. Use a cover or place under shelter for outdoor events.
What is the power consumption of the ZLX-8-G2?
Typical power consumption is 150 W at normal listening levels. Peak current draw is higher but the internal supply handles it.
Can I mount the ZLX-8-G2 on a speaker stand?
Yes, the speaker has a 1.5' pole mount socket. Use a standard speaker stand rated for at least 33 lbs (15 kg).
User questions about ZLX-8-G2 ELECTRO-VOICE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ZLX-8-G2 - ELECTRO-VOICE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZLX-8-G2 by ELECTRO-VOICE.
USER MANUAL ZLX-8-G2 ELECTRO-VOICE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELECTRO-VOICE
Model : ZLX-8-G2
Category : Uncategorized