DGE1000 - Measuring equipment Owon - Free user manual and instructions
Find the device manual for free DGE1000 Owon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Function / Arbitrary Waveform Generator |
| Model | DGE1000 |
| Brand | Owon |
| Frequency Range | 1 µHz to 10 MHz |
| Sample Rate | 125 MSa/s |
| Vertical Resolution | 14 bits |
| Output Channels | 1 |
| Output Waveforms | Sine, Square, Triangle, Ramp, Pulse, Noise, Arbitrary |
| Output Amplitude | 2 mVpp to 20 Vpp (into 50 Ω) |
| DC Offset Range | ±10 V (into 50 Ω) |
| Display | 4.3-inch TFT LCD color screen |
| Interfaces | USB Host, USB Device, LAN, external trigger input |
| Arbitrary Waveform Length | Up to 8 kpts |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Dimensions (W x H x D) | 265 x 115 x 305 mm |
| Weight | Approximately 3.2 kg |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Cleaning | Wipe with a soft dry cloth; do not use solvents |
| Safety | Overvoltage Category II; pollution degree 2 |
| Warranty | 3 years |
Frequently Asked Questions - DGE1000 Owon
How do I output a sine wave on the DGE1000?
Press the Sine button on the front panel, then adjust frequency, amplitude, and offset using the numeric keypad or rotary knob. Confirm with the Enter key.
Can I connect the DGE1000 to a PC?
Yes, via the USB Device port. Install the provided software to control the generator remotely or transfer arbitrary waveforms.
What is the maximum output voltage?
The maximum output amplitude is 20 Vpp into a high-impedance load (open circuit). Into 50 Ω, it is 10 Vpp.
How do I create a custom arbitrary waveform?
Use the Arb menu, then select Edit. You can define waveform points manually or load a waveform from a USB drive using the USB Host port.
Does the DGE1000 support frequency sweep?
Yes. Press the Sweep button, set start/stop frequencies, sweep time, and trigger mode. You can choose linear or logarithmic sweep.
What is the output impedance?
The output impedance is 50 Ω fixed. Ensure the load matches to avoid reflections.
How do I update the firmware?
Download the latest firmware from the Owon website, save it to a USB flash drive, insert into the USB Host port, and navigate to Utility > Update Firmware.
Can I use the DGE1000 as a frequency counter?
The DGE1000 does not include a frequency counter function. It is a signal generator only. For frequency measurement, consider a separate counter.
What does the 'Output Off' light mean?
When the Output button is off, the output is disabled and the connector is high-impedance. Press it again to enable output.
How do I restore factory settings?
Go to Utility > System > Factory Reset. Confirm the action. All user settings and waveforms will be erased.
User questions about DGE1000 Owon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual DGE1000 - Owon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DGE1000 by Owon.
USER MANUAL DGE1000 Owon
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Owon
Model : DGE1000
Category : Measuring equipment