Runner 4G - Router Keenetic - Free user manual and instructions
Find the device manual for free Runner 4G Keenetic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4G LTE Router |
| Dimensions (W x D x H) | 140 x 100 x 25 mm |
| Weight | 200 g |
| Power Supply | 12V DC, 1A |
| Processor | MediaTek MT7620 (580 MHz) |
| RAM | 128 MB |
| Flash Memory | 16 MB |
| LTE Modem | Built-in, supports bands 1/3/5/7/8/20 |
| Wi-Fi Standard | IEEE 802.11a/b/g/n/ac (dual-band) |
| Wi-Fi Speed | Up to 300 Mbps (2.4 GHz) + 867 Mbps (5 GHz) |
| Ethernet Ports | 1 x Gigabit WAN, 4 x Gigabit LAN |
| USB Port | 1 x USB 2.0 (for storage or printer) |
| VPN Support | L2TP/IPsec, OpenVPN, PPTP |
| Firewall | SPI, DoS protection, MAC/URL filtering |
| Parental Controls | Time-based restrictions, content filtering |
| IPv6 Support | Yes |
| Operating System | Keenetic OS (based on Linux) |
| Cooling | Passive (fanless) |
| Operating Temperature | 0°C to 40°C |
| Care Instructions | Keep in dry, ventilated area; avoid dust and liquids |
| Safety Certifications | CE, FCC, RoHS |
| Spare Parts Availability | Power adapter, antennas (order from Keenetic support) |
| Repairability | Limited; no user-serviceable parts inside |
Frequently Asked Questions - Runner 4G Keenetic
How do I set up my Keenetic Runner 4G router?
Connect the provided power adapter and insert a nano-SIM card. Power on the router and connect a device via Wi-Fi (SSID: Keenetic-XXXX) or Ethernet. Open a browser to http://my.keenetic.net and follow the setup wizard. Choose your Internet connection type (LTE, PPPoE, etc.) and configure Wi-Fi settings.
What should I do if the router does not detect the SIM card?
Ensure the SIM card is correctly inserted in the nano-SIM slot, with the chip contacts facing down. Check that the SIM is not locked with a PIN. If using a new SIM, remove any PIN request via a phone first. Restart the router after inserting the card.
Can I use an external antenna to improve LTE signal?
Yes, the Keenetic Runner 4G has two TS9 connectors for external antennas (sold separately). Unscrew the rubber caps and attach compatible antennas. This can boost signal in weak coverage areas. Ensure antennas are positioned vertically for best performance.
How do I reset the router to factory defaults?
Locate the reset button on the back panel (inside a small hole). Use a paperclip to press and hold the button for about 10 seconds until the LED indicators flash. The router will reboot with default settings (IP: 192.168.1.1, login: admin, password: admin).
Does the router support IPv6?
Yes, Keenetic Runner 4G fully supports IPv6. Go to Web interface > Internet > IPv6 and enable it. Choose the type (e.g., DHCPv6, 6to4) according to your ISP. IPv6 can be used simultaneously with IPv4.
How can I set up a VPN on this router?
Navigate to Web interface > VPN. Keenetic supports L2TP/IPsec, OpenVPN, and PPTP. For a client connection, enter the server address, username, and password provided by your VPN provider. For a server, enable the VPN type and configure the subnet. Apply settings and connect.
What is the default password to log in?
The default username is admin and password is admin. It is strongly recommended to change the password immediately after first login via System > Admin. Use a strong password with at least 8 characters, including letters and numbers.
How do I update the router firmware?
Go to Web interface > System > Firmware Update. Click 'Check for Updates' to see if a new version is available. If yes, click 'Download and Install'. The router will reboot after installation. Keep the power on during the update to avoid damage.
Why is the Wi-Fi signal weak and how can I improve it?
Check the router placement – avoid corners, metal objects, and thick walls. Adjust antennas vertically. In the web interface under Wi-Fi > Advanced, try changing the channel to a less congested one (using a Wi-Fi analyzer app). Enable 'Boost' mode if available or consider adding a Keenetic mesh system.
Can I connect a USB printer or storage to this router?
Yes, the router has a USB 2.0 port. Connect a USB flash drive or external HDD; it will appear as network storage accessible via SMB or FTP. For printers, check compatibility with Keenetic's printer list. Use Web interface > USB Applications to configure access.
User questions about Runner 4G Keenetic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual Runner 4G - Keenetic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Runner 4G by Keenetic.
USER MANUAL Runner 4G Keenetic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Keenetic
Model : Runner 4G
Category : Router