BTDG7W - Tumble drier MISTRAL - Free user manual and instructions
Find the device manual for free BTDG7W MISTRAL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Tumble dryer |
| Brand | Mistral |
| Model | BTDG7W |
| Capacity | 7 kg |
| Energy class | B |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Weight | 40 kg |
| Power supply | 220-240 V, 50 Hz |
| Power consumption | 2500 W |
| Drying programs | Cotton, Synthetics, Delicates, Wool, Mix, Rapid 30', Extra Dry, Cupboard Dry |
| Reverse tumble | Yes |
| Anti-crease function | Yes |
| Delay start | Up to 24 hours |
| Lint filter cleaning indicator | Yes |
| Condenser cleaning indicator | Yes |
| Water tank full indicator | Yes |
| Child lock | Yes |
| Overheating protection | Yes |
| Type of installation | Freestanding |
| Spare parts availability | Available for 10 years |
| User manual | Free download on notice-facile.com |
Frequently Asked Questions - BTDG7W MISTRAL
How do I clean the lint filter on the Mistral BTDG7W?
Open the door and pull out the lint filter located at the bottom of the door opening. Remove lint by hand or with a soft brush, then rinse under running water if necessary. Dry thoroughly before reinserting.
What should I do if the drying cycle takes too long?
Check that the lint filter and condenser are clean, the load is not too large, and the room temperature is adequate. Also ensure the correct program is selected for the fabric type.
Can I dry wool items in the Mistral BTDG7W?
Yes, use the dedicated 'Wool' program. However, always check the garment care label and avoid overdrying. It is recommended to remove wool items while still slightly damp.
How do I drain the water tank?
Pull out the water tank located at the bottom right of the appliance. Empty it into a sink or drain, then push it back until it clicks. The tank should be emptied after each use.
What does the 'Condenser Clean' indicator mean?
It indicates that the condenser needs cleaning. Open the bottom cover, rotate the locking handles, and pull out the condenser. Rinse it under running water to remove fluff, then reinstall.
Why does my Mistral BTDG7W stop before the cycle ends?
This could be due to a full water tank, clogged lint filter, or overload. Check these components and restart the cycle. If the issue persists, contact technical support.
How do I activate the child lock?
Press and hold the 'Child Lock' button for 3 seconds until the lock symbol appears on the display. Repeat the same to deactivate.
Can I install the dryer in a small space?
Yes, the Mistral BTDG7W is a freestanding model but requires good ventilation. Keep at least 10 cm clearance on all sides and avoid blocking air vents.
What is the maximum load for the 'Rapid 30' program?
For the rapid program, the maximum load is 3.5 kg. For best results, dry only small loads of lightly damp items.
Where can I find the serial number of my Mistral BTDG7W?
The serial number is located on the rating plate at the back of the appliance. It is also mentioned in the user manual and on the packaging.
User questions about BTDG7W MISTRAL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual BTDG7W - MISTRAL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BTDG7W by MISTRAL.
USER MANUAL BTDG7W MISTRAL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MISTRAL
Model : BTDG7W
Category : Tumble drier