EXPS3 - Uncategorized EOTECH - Free user manual and instructions
Find the device manual for free EXPS3 EOTECH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Holographic Weapon Sight |
| Model | EXPS3 |
| Brand | EOTech |
| Dimensions (L x W x H) | 3.7 x 2.0 x 2.5 in (94 x 51 x 64 mm) |
| Weight | 11.2 oz (318 g) with batteries |
| Power Source | Two (2) AA alkaline batteries |
| Battery Life | Approximately 600 hours at nominal setting |
| Reticle Pattern | 65 MOA ring with 1 MOA dot |
| Night Vision Compatible | Yes (NV button for 8 settings) |
| Brightness Settings | 20 total (10 day, 8 NV, 2 boost) |
| Magnification | 1x (unity) |
| Mount Type | Picatinny rail (MIL-STD-1913) |
| Parallax Free | Yes (at all distances) |
| Optical Coating | Anti-reflective, scratch-resistant |
| Housing Material | Aluminum alloy |
| Water Resistance | Submersible to 10 ft (3 m) |
| Operating Temperature | -40°F to +140°F (-40°C to +60°C) |
| Maintenance | Clean lenses with a soft, dry cloth; avoid solvents |
| Safety Features | Automatic shut-off after 8 hours (day mode) / 4 hours (NV) |
| Parts & Repairability | Battery compartment and brightness controls field-replaceable; service by EOTech recommended |
| Warranty | Limited lifetime warranty (check manufacturer details) |
Frequently Asked Questions - EXPS3 EOTECH
How do I change the batteries in the EXPS3?
Turn the battery cap counterclockwise to open. Insert two AA alkaline batteries with correct polarity. Re-tighten the cap securely. Battery life is about 600 hours at nominal setting.
What is the correct mounting procedure?
Attach the sight to a Picatinny rail (MIL-STD-1913). Tighten the cross bolt to secure. Torque to 15-20 in-lbs if using a torque wrench. Ensure no movement after mounting.
How do I zero the EXPS3?
Use the windage and elevation adjustments (1/2 MOA per click). Adjust until the reticle aligns with your point of impact at a known distance (typically 100 yards).
Can I use the EXPS3 with night vision?
Yes. Press the NV button (the up arrow on brightness control) to cycle through 8 night vision compatible settings. Use the lowest setting to avoid sensor bloom.
What do the brightness settings mean?
There are 20 settings total: 10 daylight, 8 NV (night vision), and 2 boost for bright conditions. Press the down arrow to decrease, up to increase.
Is the EXPS3 waterproof?
Yes, it is submersible to 10 feet (3 meters) for up to 1 hour. Ensure the battery cap is fully tightened before submersion.
How do I activate the automatic shut-off?
The shut-off is automatic. In day mode, it turns off after 8 hours of continuous on-time. In NV mode, after 4 hours. To reset, press any brightness button.
What reticle patterns are available?
The default reticle is a 65 MOA ring with a 1 MOA center dot. Some models may offer additional patterns via dip switch settings (consult manual).
How do I clean the lenses?
Use a soft, lint-free cloth to gently wipe lenses. For stubborn dirt, use lens cleaner specifically for optics. Avoid harsh chemicals or abrasive materials.
What is the warranty for EXPS3?
EOTech offers a limited lifetime warranty covering defects in material and workmanship. Does not cover misuse, abuse, or unauthorized modifications. Register online for details.
User questions about EXPS3 EOTECH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual EXPS3 - EOTECH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EXPS3 by EOTECH.
USER MANUAL EXPS3 EOTECH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EOTECH
Model : EXPS3
Category : Uncategorized