ET85 - Tablet ZEBRA - Free user manual and instructions
Find the device manual for free ET85 ZEBRA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rugged Tablet PC |
| Model | ET85 |
| Brand | Zebra |
| Operating System | Android 8.1 (Oreo) |
| Processor | Qualcomm Snapdragon 660 |
| Display | 10.1 inches, 1920 x 1200 pixels |
| Memory | 4 GB RAM, 64 GB Flash |
| Dimensions | 277 x 177 x 15 mm |
| Weight | 800 g |
| Battery | Li-ion 7.6V, 5000 mAh |
| Data Capture | Integrated barcode scanner (SE4100), RFID (optional) |
| Connectivity | Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, NFC, USB-C |
| Camera | Front 2 MP, Rear 8 MP with flash |
| Durability | IP65, MIL-STD-810G, drop up to 1.2 m |
| Audio | Built-in speaker, microphone, headset jack |
| Sensors | Accelerometer, gyroscope, light sensor, proximity |
| Cleaning | Wipe with a soft, lint-free cloth dampened with mild detergent; avoid abrasive cleaners |
| Safety | Complies with FCC, CE, UL standards |
| Spare Parts | Contact Zebra authorized partners for replacement batteries, displays, etc. |
| Manual | Available for free download in PDF format |
Frequently Asked Questions - ET85 ZEBRA
How do I perform a factory reset on the Zebra ET85?
Go to Settings > Backup & Reset > Factory data reset. Alternatively, press and hold the Power and Volume Down keys simultaneously until the menu appears, then use volume keys to navigate to 'Wipe data/factory reset' and confirm with Power.
How do I scan a barcode with the ET85?
Open the default DataWedge app or any scanning application. Point the integrated scanner at the barcode and press the hardware scan button (side button) or tap the screen. The decoded data appears in the active input field.
What is the IP rating of the ET85?
The Zebra ET85 has an IP65 rating, meaning it is dust-tight and protected against low-pressure water jets from any direction.
How do I change the battery on the ET85?
Power off the device. Slide the battery latch to release it, then lift the battery out. Insert the new battery and press down until the latch clicks. Ensure the battery is fully seated before powering on.
Can I connect the ET85 to an external monitor?
Yes, via the USB-C port using a USB-C to HDMI adapter. The device supports DisplayPort alternate mode. Go to Settings > Display > Cast to enable screen mirroring.
How do I update the software on my ET85?
Go to Settings > About Phone > System updates. Tap 'Check for updates'. If an update is available, follow the on-screen instructions. Ensure the battery is at least 50% and connect to Wi-Fi.
What should I do if the device freezes?
Perform a soft reset by pressing and holding the Power button for 10-15 seconds until the device restarts. If that fails, press and hold Power and Volume Up for 10 seconds to force a reboot.
Can I use the ET85 in hazardous environments?
The ET85 is not certified for hazardous locations (Class I, II, III). It is designed for general warehouse and outdoor use but not for explosive atmospheres.
How do I clean the screen and scanner window?
Use a soft, lint-free cloth slightly dampened with water or a 50/50 isopropyl alcohol/water solution. Gently wipe the screen and scanner window. Avoid excessive moisture and abrasive materials.
Where can I download the user manual for the ET85?
Visit notice-facile.com and search for 'Zebra ET85'. The manual is available for free download in PDF format. You can also request a translated version by email.
User questions about ET85 ZEBRA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tablet in PDF format for free! Find your manual ET85 - ZEBRA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ET85 by ZEBRA.
USER MANUAL ET85 ZEBRA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZEBRA
Model : ET85
Category : Tablet