Raider - Motorcycle TVS - Free user manual and instructions
Find the device manual for free Raider TVS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motorcycle |
| Brand | TVS |
| Model | Raider |
| Category | Commuter / Standard |
| Engine Displacement | 124.8 cc |
| Engine Type | Single cylinder, 4-stroke, air-cooled |
| Power | 11.4 bhp @ 7500 rpm |
| Fuel System | Fuel Injection |
| Fuel Type | Petrol |
| Fuel Tank Capacity | 10 liters |
| Transmission | 5-speed manual |
| Dimensions (L x W x H) | 1990 x 790 x 1080 mm |
| Wheelbase | 1295 mm |
| Ground Clearance | 165 mm |
| Seat Height | 790 mm |
| Kerb Weight | 118 kg |
| Front Suspension | Telescopic fork |
| Rear Suspension | Mono shock |
| Front Brake | Disc (200 mm) |
| Rear Brake | Drum (130 mm) |
| Tire Size (Front) | 80/100-17 |
| Tire Size (Rear) | 100/90-17 |
Frequently Asked Questions - Raider TVS
How do I check the engine oil level?
Park the motorcycle on a level surface and let the engine cool. Remove the oil dipstick, wipe it clean, reinsert it without screwing, then remove again. The oil level should be between the MIN and MAX marks. Top up if necessary.
What is the recommended tire pressure for the Raider?
The recommended tire pressure is 29 psi (200 kPa) for the front tire and 33 psi (230 kPa) for the rear tire when riding solo. Adjust for load conditions.
How often should I service the motorcycle?
Service intervals are every 3000 km or 3 months, whichever comes first. This includes oil change, chain adjustment, and brake inspection.
How do I adjust the chain tension?
Loosen the rear axle nut, then turn the adjuster nuts on both sides equally to set the chain slack to 20-30 mm at the middle of the chain. Tighten the axle nut to the specified torque.
What type of brake fluid is recommended?
Use DOT 4 brake fluid. Check the fluid level in the reservoir and replace every 2 years or if it appears dark or contaminated.
How do I start the motorcycle?
Turn the ignition key to ON, ensure the kill switch is in RUN position. Pull in the clutch lever, press the electric start button. If the engine is cold, pull the choke lever. You can also use the kick start lever if needed.
What should I do if the engine overheats?
Stop the motorcycle immediately and let the engine cool down. Check the coolant level (if liquid-cooled, but Raider is air-cooled) or ensure airflow. For air-cooled, check for obstructions and allow idle before shutting off.
How do I clean the air filter?
Remove the air filter cover and take out the filter element. For a foam filter, wash it with kerosene or filter cleaner, and dry thoroughly. Apply a light coat of filter oil before reinstalling.
Where can I find the VIN number?
The VIN (Vehicle Identification Number) is stamped on the steering head of the frame. It is also recorded in the vehicle registration documents.
How do I replace the headlight bulb?
Disconnect the battery, remove the headlight cover, and unplug the bulb connector. Release the bulb retaining clip, replace with a new 12V 35/35W halogen bulb, and reassemble.
User questions about Raider TVS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motorcycle in PDF format for free! Find your manual Raider - TVS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Raider by TVS.
USER MANUAL Raider TVS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TVS
Model : Raider
Category : Motorcycle