DVR-116G-K1 - Digital Video Recorder Hikvision - Free user manual and instructions
Find the device manual for free DVR-116G-K1 Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Video Recorder (DVR) |
| Brand | Hikvision |
| Model | DVR-116G-K1 |
| Video Channels | 16 |
| Video Compression | H.265+ / H.265 / H.264+ / H.264 |
| Audio Compression | G.711u / G.711a / G.726 |
| Recording Resolution | Up to 5 MP (2560 × 1920) |
| HDD Interface | SATA, 1 HDD up to 10 TB |
| Power Supply | 12 VDC, 2 A |
| Power Consumption | ≤ 15 W (without HDD) |
| Dimensions (W × D × H) | 315 × 260 × 56 mm |
| Weight | ≈ 2.3 kg (without HDD) |
| Operating Temperature | −10 °C to +55 °C |
| Humidity | 10% to 90% (non-condensing) |
| Network Interface | 1 RJ45 10/100/1000 Mbps Ethernet |
| USB Interface | 2 USB 2.0, 1 USB 3.0 |
| Alarm I/O | 4 inputs, 1 output |
| Main Functions | Live view, playback, remote access, motion detection, event recording, smart search |
| Remote Viewing | Via web browser, Hik-Connect app, or CMS software |
| Maintenance & Cleaning | Keep dry; clean with soft cloth; do not use liquid cleaners |
| Safety | Use only supplied power adapter; do not block vents; avoid overloading circuits |
| Spare Parts & Repairability | Hard drive, power adapter, remote control; contact Hikvision support for repairs |
| General Information | Supports PoE (Power over Ethernet) via optional NVR model; 1U rackmount design |
Frequently Asked Questions - DVR-116G-K1 Hikvision
How do I connect the DVR to my network?
Connect an Ethernet cable from the DVR's LAN port to your router. Then access the DVR via the Hik-Connect app or web browser using the IP address assigned by DHCP.
What hard drive size can I install?
The DVR supports a single SATA hard drive up to 10 TB. Ensure the HDD is compatible with 24/7 surveillance use.
How do I reset the DVR to factory defaults?
Press and hold the reset button (located at the back panel) for 10 seconds while the DVR is powered on. Alternatively, go to Menu > System > Maintenance > Factory Default.
Can I view the DVR remotely?
Yes, you can view live and recorded video remotely using the Hik-Connect mobile app or by accessing the DVR's web interface via a browser. Ensure the DVR is connected to the internet.
The DVR is not detecting any cameras. What should I do?
Check that all cameras are properly connected to the BNC inputs. Go to Menu > Camera > Management to verify camera status. If cameras are not detected, try restarting the DVR or checking the power supply to the cameras.
How do I set up motion detection recording?
Navigate to Menu > Event > Motion Detection. Enable motion detection for the desired channels and set the sensitivity and area. Then configure recording schedule to record on event.
What video formats are supported?
The DVR supports H.265+, H.265, H.264+, and H.264 compression. It records in MP4 or AVI format on the hard drive.
How do I export recorded footage?
Insert a USB flash drive into the DVR USB port. Go to Playback, select the desired recording, and click Export. Choose the file format and destination.
Why is the DVR beeping continuously?
A continuous beep usually indicates a hard drive error or fan failure. Check the hard drive status in Menu > System > HDD Management. If the fan is noisy, it might need replacement.
Can I use PoE cameras with this DVR?
The DVR-116G-K1 does not have built-in PoE ports. To use PoE cameras, you need a separate PoE switch or injector. Alternatively, consider a model with built-in PoE.
User questions about DVR-116G-K1 Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Digital Video Recorder in PDF format for free! Find your manual DVR-116G-K1 - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DVR-116G-K1 by Hikvision.