Revo 4 IR - Effect machine American DJ - Free user manual and instructions
Find the device manual for free Revo 4 IR American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DMX LED Effect Light |
| Brand | American DJ |
| Model | Revo 4 IR |
| Dimensions (L x W x H) | Approx. 10.5 x 8.5 x 10.5 inches |
| Weight | Approx. 4.5 lbs |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 30W max |
| Light Source | 4 x 3W RGB LEDs |
| DMX Channels | 4 or 7 channels (selectable) |
| Operating Modes | Sound Active, Auto, Master/Slave, DMX, IR Remote |
| IR Remote Control | Included |
| DMX Connectors | 3-pin XLR in/out |
| Safety Certifications | CE, cETLus |
| Cooling | Convection cooled |
| Housing Material | ABS plastic |
| Mounting | Floor standing or hanging (mounting bracket included) |
| Cleaning | Use a soft dry cloth; avoid solvents |
| Replaceable Parts | Fuse only (T1A 250V); LEDs non-replaceable |
| Included Accessories | IR remote, power cord, user manual |
Frequently Asked Questions - Revo 4 IR American DJ
How do I connect the Revo 4 IR to a DMX controller?
Use a standard 3-pin XLR cable. Connect the male end to the fixture's DMX IN and the female end to the controller or next fixture. Set the fixture's DMX address using the DIP switches or menu.
How do I set the DMX address?
Press the MENU button until 'Addr' appears, then use the UP and DOWN buttons to select the desired address. Press ENTER to confirm.
How do I use the IR remote control?
Point the remote toward the IR receiver on the front of the fixture. Ensure the fixture is in IR mode (select 'Ird' in the menu). Use the remote to change colors, patterns, and modes.
How do I activate sound active mode?
Press the MENU button until 'Soun' appears, press ENTER, then use UP/DOWN to select 'On'. The fixture will react to music via its built-in microphone.
Can I link multiple Revo 4 IR fixtures together?
Yes, in Master/Slave mode. Set one fixture as Master (select 'Mast' in menu) and others as Slave (select 'SLAV'). Connect them via XLR cables. The slaves will follow the master.
What is the difference between 4-channel and 7-channel DMX modes?
In 4-channel mode, you control RGB and master dimmer. In 7-channel mode, you have additional channels for strobe, color macros, and sound sensitivity.
How do I clean the Revo 4 IR?
Disconnect power. Use a soft, lint-free cloth slightly dampened with water or a mild cleaner. Do not use harsh chemicals or spray liquids directly onto the fixture.
What should I do if the fixture does not respond to DMX?
Check that the DMX cable is properly connected and not damaged. Verify the fixture's DMX address matches the controller. Ensure termination (120 ohm resistor) is used at the last fixture.
Is the Revo 4 IR suitable for outdoor use?
No, it is designed for indoor use only. Keep it dry and away from moisture. Operating temperature range: 14°F to 104°F (-10°C to 40°C).
Can I replace the LEDs if they burn out?
The LEDs are not user-replaceable. If they fail, the fixture should be serviced by a qualified technician. The only user-replaceable part is the internal fuse.
User questions about Revo 4 IR American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Revo 4 IR - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Revo 4 IR by American DJ.
USER MANUAL Revo 4 IR American DJ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American DJ
Model : Revo 4 IR
Category : Effect machine