IC-M200 - Radio ICOM - Free user manual and instructions
Find the device manual for free IC-M200 ICOM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fixed-Mount Marine VHF Radio |
| Brand | ICOM |
| Model | IC-M200 |
| Dimensions (W x H x D) | 160 mm x 70 mm x 110 mm |
| Weight | Approx. 1.0 kg (2.2 lbs) |
| Power Supply | 13.8 V DC (11.7 – 15.9 V DC) |
| Current Consumption | Standby: 0.5 A, Transmit: 5 A (at 25W) |
| Transmit Power | 25 W (selectable 1W/25W) |
| Frequency Range | 156.000 – 157.425 MHz (TX), 156.050 – 163.275 MHz (RX) |
| Channels | All USA, International, and Canadian marine channels |
| DSC Functions | Class D DSC (Digital Selective Calling) with Distress, Safety, and Routine calls |
| Scanning | Dual/Tri-Watch, Priority Scan, Memory Scan |
| Weather Channels | 10 weather channels with weather alert |
| Waterproof Rating | IPX7 (1 meter depth for 30 minutes) |
| Antenna Impedance | 50 Ω |
| Audio Output | External speaker: 4 W at 4 Ω |
| Display | LCD with backlight (adjustable) |
| Key Features | Dual watch, Tri-watch, Memory channels, Channel name display, AquaQuake™ |
| Spare Parts | Microphone, mounting bracket, power cable, screws available from ICOM |
| Maintenance | Clean with a soft damp cloth; avoid harsh chemicals; check antenna connections |
| Safety | Ensure proper ventilation; do not transmit without antenna; follow local regulations |
| General Information | Designed for recreational and commercial marine use; supports NMEA0183 for GPS |
Frequently Asked Questions - IC-M200 ICOM
How do I perform a DSC distress call on the IC-M200?
Press and hold the DISTRESS key for several seconds. The radio will automatically transmit your MMSI and position (if GPS connected) on Channel 70.
Can I use the IC-M200 in a handheld mode?
No, the IC-M200 is a fixed-mount radio designed for permanent installation on a boat. It requires an external antenna and 13.8V power.
How do I program memory channels?
Select the desired channel, press and hold the MEM key until the memory number flashes, then select a memory location and press MEM again to save.
What is AquaQuake™?
AquaQuake™ is a feature that vibrates the speaker grille to clear water from the microphone holes after rinsing, preventing static and distortion.
Can I connect an external GPS to the IC-M200 for DSC?
Yes, the IC-M200 has a NMEA0183 input for GPS data. Wire the GPS output to the radio's GPS input (typically brown/white wires) to enable automatic position transmission in distress calls.
What is the difference between Dual Watch and Tri-Watch?
Dual Watch monitors Channel 16 and one other channel. Tri-Watch monitors Channel 16 and two other channels (or the last used channel) alternately.
How do I adjust the squelch?
Turn the SQL knob clockwise until noise disappears, then slightly further for maximum sensitivity. For stronger signals, turn counterclockwise.
Is the IC-M200 waterproof?
Yes, it meets IPX7 standards, meaning it can be submerged in 1 meter of water for up to 30 minutes. However, avoid submersion when connectors are not sealed.
What type of antenna should I use?
Use a 50 Ω marine VHF antenna with an impedance match. A 3 dB or 6 dB gain antenna is recommended for optimal range, mounted as high as possible.
How do I enable weather alert?
Press the WX key to select a weather channel. Then press and hold WX until 'WX ALERT' appears. The radio will monitor for NOAA weather alerts and break through when active.
User questions about IC-M200 ICOM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Radio in PDF format for free! Find your manual IC-M200 - ICOM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IC-M200 by ICOM.