AHM-64 - Audio processor ALLEN & HEATH - Free user manual and instructions
Find the device manual for free AHM-64 ALLEN & HEATH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Processor |
| Brand | Allen & Heath |
| Model | AHM-64 |
| Dimensions (H x W x D) | 44 mm x 482 mm x 260 mm (1U rack mount) |
| Weight | 3.6 kg |
| Power Supply | 100-240 V AC, 50-60 Hz, 50 W max |
| Audio Channels | 64x64 audio matrix |
| DSP Processing | Up to 48 kHz, internal processing |
| Network Audio | Dante / AES67 support |
| Control Protocols | TCP/IP, SNMP, and custom GPIO |
| Analog Audio I/O | Optional expansion cards |
| User Interface | Front panel LCD and rotary encoders |
| Configuration Software | Allen & Heath AHM Designer |
| Main Functions | Audio routing, mixing, equalization, dynamics, delay, and system control |
| Maintenance & Cleaning | Disconnect power before cleaning; wipe with a soft dry cloth; avoid liquids |
| Safety Precautions | Use only supplied power cord; do not block ventilation; no user-serviceable parts inside |
| Spare Parts & Repairability | Contact authorized service center for replacement parts; no consumer repair |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Compliance | CE, FCC, RoHS |
Frequently Asked Questions - AHM-64 ALLEN & HEATH
How do I connect the AHM-64 to a Dante network?
Connect an Ethernet cable from the AHM-64's Dante port to your network switch. Use the AHM Designer software to configure the Dante patchbay and assign audio channels.
What is the maximum number of input/output channels?
The AHM-64 supports up to 64x64 audio channels for routing and processing.
How do I reset the device to factory settings?
Power on the unit while holding the Reset button on the front panel until the LCD shows 'Factory Reset'. Confirm by pressing the encoder.
Can I control the AHM-64 remotely?
Yes, via Ethernet using the AHM Designer software or third-party control systems via TCP/IP and SNMP.
What expansion cards are available?
Options include analog I/O, AES/EBU, and additional Dante cards. Check the Allen & Heath website for compatible models.
How do I update the firmware?
Download the latest firmware from the Allen & Heath support site. Use a USB drive to load the file via the front panel USB port, then follow the on-screen instructions.
What is the power consumption?
The AHM-64 consumes less than 50W under normal operation. Use the supplied power cord and ensure proper ventilation.
Can the AHM-64 be rack-mounted?
Yes, it is 1U high and comes with rack ears for standard 19-inch racks.
How do I troubleshoot no audio output?
Check the Dante network connections, verify audio routing in AHM Designer, ensure the output is not muted, and inspect the front panel for error indicators.
Is the AHM-64 compatible with other Allen & Heath devices?
Yes, it integrates seamlessly with dLive and SQ mixers via Dante, and can be controlled from the same network.
User questions about AHM-64 ALLEN & HEATH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio processor in PDF format for free! Find your manual AHM-64 - ALLEN & HEATH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AHM-64 by ALLEN & HEATH.
USER MANUAL AHM-64 ALLEN & HEATH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALLEN & HEATH
Model : AHM-64
Category : Audio processor