XPA U 2008 FX - Receiver Extron - Free user manual and instructions
Find the device manual for free XPA U 2008 FX Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Audio Power Amplifier |
| Brand | Extron |
| Model | XPA U 2008 FX |
| Number of Channels | 8 |
| Power Output per Channel | 200 W RMS at 8 Ω |
| Total Power Output | 1600 W |
| Dimensions (H x W x D) | 3.5 x 17.4 x 12.5 inches (2U rackmount) |
| Weight | 28.5 lbs |
| Power Supply | 100-240 V AC, 50/60 Hz, 15 A |
| Frequency Response | 20 Hz – 20 kHz ±0.5 dB |
| Input Connectors | 8 x balanced Euroblock, 8 x unbalanced RCA |
| Output Connectors | 8 x binding posts, 8 x Euroblock |
| Cooling | Variable speed fans, rear-mounted |
| Protection Features | Short circuit, thermal, overcurrent, DC offset |
| Front Panel Indicators | Power, signal, clip, protect per channel |
| Rack Mounting | Yes, with included brackets |
| Operating Temperature | 32 °F to 122 °F (0 °C to 50 °C) |
| Cleaning and Maintenance | Wipe with a dry, lint-free cloth; do not use liquids |
| Safety Precautions | Use with grounded outlet; do not expose to moisture; no user-serviceable parts inside |
| Spare Parts and Repairability | Contact Extron authorized service centers for parts and repair |
| General Information | Professional-grade amplifier for commercial AV systems; supports 70V/100V output with optional plug-in cards |
Frequently Asked Questions - XPA U 2008 FX Extron
How do I connect speakers to the XPA U 2008 FX?
Use the output binding posts or Euroblock connectors. Ensure the speaker impedance is 8 Ω or higher per channel. For 70V/100V systems, install optional output plug-in cards.
What is the maximum power output per channel?
The amplifier delivers 200 W RMS per channel at 8 Ω. At 4 Ω, output reduces to 150 W per channel due to current limiting.
Can the amplifier be bridged?
No, the XPA U 2008 FX is not designed for bridged operation. Each channel operates independently.
How do I reset the protect status?
Turn off the amplifier, disconnect all inputs and outputs, wait 30 seconds, then power on. If protect persists, check for short circuits or overheating.
What type of input connectors are available?
Each channel has a balanced Euroblock terminal and an unbalanced RCA input. Use the balanced input for longer cable runs to reduce noise.
How do I clean the amplifier?
Disconnect power. Wipe the exterior with a dry, lint-free cloth. Do not use water, solvents, or compressed air inside.
What are the dimensions and rack space required?
The unit is 2U rack height (3.5 inches), 17.4 inches wide, and 12.5 inches deep. Allow at least 2 inches of clearance behind for ventilation.
Does the amplifier have fan noise?
The variable speed fans are temperature controlled. At low loads they are nearly silent, but at high output they may become audible. Rated 34 dB at idle.
Can I use this amplifier with a 70V speaker system?
Yes, with the optional XPA U 70V/100V output plug-in cards. Without them, only low-impedance (8 Ω) operation is supported.
What should I do if the amplifier overheats?
Ensure proper ventilation. Do not block front/rear vents. If the thermal protect indicator lights, reduce input signal level or lower ambient temperature. The amplifier will automatically resume when cooled.
User questions about XPA U 2008 FX Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual XPA U 2008 FX - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XPA U 2008 FX by Extron.
USER MANUAL XPA U 2008 FX Extron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extron
Model : XPA U 2008 FX
Category : Receiver