PLK-G2516 - Sewing machine JUKI - Free user manual and instructions
Find the device manual for free PLK-G2516 JUKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Electronic Lockstitch Buttonholer |
| Brand | Juki |
| Model | PLK-G2516 |
| Dimensions (L x W x H) | 1200 x 700 x 1400 mm |
| Weight | 200 kg |
| Power Supply | 200-240 V, Single Phase, 50/60 Hz |
| Power Consumption | 1.5 kW |
| Max Sewing Speed | 2,500 rpm |
| Stitch Type | Lockstitch |
| Needle System | 134 |
| Thread Take-up | Standard |
| Presser Foot | Automatic |
| Thread Trimmer | Automatic |
| Lubrication | Automatic |
| Working Area | 250 x 160 mm |
| Programmable Patterns | Yes, built-in and user-defined |
| Safety Features | Emergency stop, safety switch |
| Maintenance | Regular cleaning and oiling |
| Spare Parts Availability | Through Juki authorized dealers |
| Warranty | 1 year standard warranty |
Frequently Asked Questions - PLK-G2516 JUKI
How do I change the needle on the Juki PLK-G2516?
Turn off the machine, loosen the needle clamp screw, remove the old needle, insert the new needle (system 134) with the flat side facing the slot, and tighten the screw.
What type of oil should I use for lubrication?
Use Juki genuine sewing machine oil or a high-quality ISO VG 15 sewing machine oil. Do not use automotive oil.
How to adjust thread tension?
Turn the tension dial clockwise to increase tension and counterclockwise to decrease. For standard buttonholes, start with a tension of 3-4 and adjust based on fabric.
How to clear error codes on the display?
Press the 'Reset' key on the control panel. Common errors like E-01 (needle interference) require checking the needle and loopers first.
How to program a new buttonhole pattern?
Enter programming mode via the panel, select pattern number, adjust stitch length and width using the arrow keys, and save. Refer to the user manual for detailed steps.
How to replace the knife for cutting buttonholes?
Disconnect power, remove the knife cover, loosen the knife screw, replace with a new Juki knife, align correctly, and retighten. Recalibrate if necessary.
What is the maximum buttonhole size?
The maximum buttonhole length is 40 mm and width up to 8 mm, depending on the pattern and fabric.
How to align the work clamp?
Use the clamp adjustment screws located under the table. Loosen to adjust forward/backward or left/right, align with the needle, and retighten. Test with a sample fabric.
How to troubleshoot skipped stitches?
Check needle condition (replace if bent), thread tension (adjust), and timing between needle and looper. Clean the hook area and ensure proper lubrication.
How to reset the machine to factory settings?
Hold the 'Menu' and 'Enter' keys while powering on, then select 'Factory Reset' from the menu. Confirm to restore defaults. All user programs will be erased.
User questions about PLK-G2516 JUKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sewing machine in PDF format for free! Find your manual PLK-G2516 - JUKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLK-G2516 by JUKI.
USER MANUAL PLK-G2516 JUKI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JUKI
Model : PLK-G2516
Category : Sewing machine