R71CF-313 - Security System ACTi - Free user manual and instructions
Find the device manual for free R71CF-313 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Brand | ACTi |
| Model | R71CF-313 |
| Dimensions (L x W x H) | 70 mm x 70 mm x 150 mm |
| Weight | 500 g |
| Power Supply | PoE (IEEE 802.3af) or DC 12V |
| Maximum Resolution | 1920 x 1080 (Full HD) |
| Frame Rate | 30 fps at 1080p |
| Lens | 3.6 mm fixed lens |
| Night Vision | Up to 30 m IR distance |
| Video Compression | H.264, MJPEG |
| Storage | MicroSD card slot (up to 128 GB) |
| Network Interface | 10/100 Base-T Ethernet |
| Weatherproof Rating | IP67 |
| Operating Temperature | -20°C to 50°C |
| Motion Detection | Yes, configurable zones |
| Audio | Built-in microphone |
| Mounting | Wall or ceiling mount included |
| Maintenance | Clean lens with soft, dry cloth |
| Safety | Use certified PoE switch or DC adapter |
| Compliance | CE, FCC, RoHS |
Frequently Asked Questions - R71CF-313 ACTi
How do I reset the ACTi R71CF-313 to factory defaults?
Press and hold the reset button (located on the bottom of the camera) for 10 seconds using a paperclip. The camera will reboot with default settings.
What network settings are required for first-time installation?
Ensure the camera is connected to a PoE switch or injector. Use the ACTi Configuration Tool to discover the camera on your network and assign an IP address. Default login is admin/admin.
Can I view the camera feed remotely via smartphone?
Yes, install the ACTi NVR or ACTi Mobile app. Add the camera by scanning its QR code or entering its IP address. Ensure port forwarding is configured on your router.
How do I enable motion detection alerts?
Log into the camera web interface, go to Events > Motion Detection. Draw detection zones and set sensitivity. Choose notification methods like email or FTP.
What should I do if the camera shows no image?
Check power LED. If off, verify PoE or DC power. Ensure cables are undamaged. Try restarting the camera. If still no image, check firewall settings and ensure the camera IP is accessible.
Can I store recordings directly on the camera?
Yes, insert a MicroSD card (up to 128 GB) into the slot. Configure recording schedule and event triggers in the web interface under Storage.
What maintenance is required for outdoor use?
Periodically clean the lens and IR LEDs with a soft, lint-free cloth. Check for insect nests or debris. Ensure the weatherproof seal is intact after installation.
How do I update the firmware?
Download the latest firmware from the ACTi website. Log into the camera web interface, go to System > Firmware Upgrade, and upload the file. Do not power off during update.
What is the default username and password?
Default username is admin and password is admin. Change this immediately after initial setup for security.
Can the camera be used with third-party NVR software?
Yes, it supports ONVIF Profile S and RTSP streams. Add the camera manually using its IP and credentials. Compatible with many NVRs like Blue Iris, Synology Surveillance Station.
User questions about R71CF-313 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security System in PDF format for free! Find your manual R71CF-313 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. R71CF-313 by ACTi.
USER MANUAL R71CF-313 ACTi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACTi
Model : R71CF-313
Category : Security System