SP200 - Uncategorized Global Water - Free user manual and instructions
Find the device manual for free SP200 Global Water in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Pump |
| Brand | Global Water |
| Model | SP200 |
| Dimensions (L x W x H) | 120 mm x 80 mm x 80 mm |
| Weight | 0.5 kg |
| Power Consumption | 50 W |
| Supply Voltage | 12 V DC |
| Flow Rate | 200 L/h |
| Maximum Head | 3 m |
| Inlet/Outlet Size | 1/2 inch |
| Material | Stainless Steel |
| Protection Class | IP68 |
| Cable Length | 3 m |
| Usage | Submersible |
| Control Type | Manual |
| Max Liquid Temperature | 35 °C |
| Maintenance | Clean inlet filter regularly |
| Safety Feature | Thermal overload protection |
| Repairability | Replaceable seals and impeller |
| Included Accessories | Instruction manual, adapter |
Frequently Asked Questions - SP200 Global Water
How do I install the SP200 water pump?
Connect the pump to a 12V DC power source and submerge it completely in water. Ensure the outlet hose is securely attached to the pump outlet. The pump should be placed on a stable surface to prevent vibration.
What is the maximum pumping depth for the SP200?
The maximum submersion depth is 3 meters. The pump can push water up to a head of 3 meters above the water level.
Can I use the SP200 for dirty water?
No, the SP200 is designed for clean water only. Particles larger than 1 mm may clog the pump. Use a pre-filter if necessary.
How do I clean the SP200?
Disconnect the pump from power. Remove the inlet filter and rinse it under running water. Use a soft brush to clean the impeller area if needed. Reassemble and let dry before storage.
The pump is not starting. What should I check?
First, verify that the power supply is working and properly connected. Check if the pump is fully submerged (it requires water for cooling). Inspect the fuse or circuit breaker. If still not working, the impeller may be jammed; open the pump and clean it.
Is the SP200 suitable for saltwater?
No, the SP200 is intended for freshwater use only. Saltwater will corrode the internal components and void the warranty.
What voltage does the SP200 require?
The pump operates on 12V DC. Use a regulated power supply with at least 5A current capacity. Do not connect directly to a car battery without a fuse.
How long can the SP200 run continuously?
The SP200 is designed for continuous duty. However, ensure the pump is always submerged for cooling. Avoid running dry, as it may damage the motor.
Can I replace the pump's cord if damaged?
Yes, the cord is replaceable. Unscrew the cable gland, disconnect the wires, and replace with a similar waterproof cable. Ensure proper sealing to maintain IP68 protection.
What is the warranty for the SP200?
The SP200 comes with a 12-month warranty covering manufacturing defects. The warranty does not cover damage from misuse, improper installation, or lack of maintenance.
User questions about SP200 Global Water
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SP200 - Global Water and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SP200 by Global Water.
USER MANUAL SP200 Global Water
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Global Water
Model : SP200
Category : Uncategorized