D887 - Sewing machine Dürkopp Adler - Free user manual and instructions
Find the device manual for free D887 Dürkopp Adler in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Sewing Machine |
| Brand | Dürkopp Adler |
| Model | D887 |
| Stitch Type | Single-needle lockstitch |
| Max Sewing Speed | 5,500 stitches per minute |
| Stitch Length | Up to 9 mm |
| Needle System | 135 x 17 / 134 |
| Needle Size Range | Nm 70 – 110 |
| Thread Trimming | Automatic, programmable |
| Feeding System | Bottom feed with drop feed, adjustable |
| Backtack Function | Automatic, programmable |
| Table Dimensions (L x W x H) | 1200 mm x 700 mm x 800 mm (approximate) |
| Weight (Machine + Table) | Approx. 65 kg |
| Power Supply | 220-240 V, 50/60 Hz |
| Motor Power | 550 W clutch motor or 400 W servo motor |
| Lubrication | Automatic oil circulation with pump |
| Oil Type | Mineral oil ISO VG 10 – 15 |
| Safety Features | Finger guard, safety clutch on handwheel |
| Spare Parts Availability | Widely available through Dürkopp Adler dealers |
| Reparability | Serviceable by trained technicians; manuals and diagrams available |
| Maintenance Interval | Daily cleaning of lint; oil change every 2000 hours |
Frequently Asked Questions - D887 Dürkopp Adler
How do I thread the Dürkopp Adler D887?
Refer to the threading diagram on the machine. Start with the spool pin, pass through the top tension discs, around the take-up lever, then through the needle eye. Ensure the presser foot is raised when threading.
What type of oil should I use for the D887?
Use a high-quality mineral oil with ISO VG 10-15 viscosity. Do not use synthetic or household oils. The machine has an automatic oiling system; check oil level regularly.
How do I adjust the stitch length?
The stitch length is adjusted using the stitch length control lever located on the front of the machine. Typical range is 1 to 9 mm. For precise setting, refer to the manual.
How do I set the thread tension?
Top tension is adjusted via the numbered dial on the tension assembly. Bobbin tension is adjusted by the screw on the bobbin case. Always test on scrap fabric first.
Why is my machine skipping stitches?
Possible causes: dull or bent needle, incorrect needle size for the fabric, improper threading, or timing issues. Replace the needle and re-thread. If problem persists, consult a technician.
How do I change the needle on the D887?
Loosen the needle clamp screw, remove the old needle, insert the new needle with the flat side facing back, and tighten. Use needle system 134/135 x 17, sizes Nm 70-110.
What are the common error codes and their meanings?
Common codes: E01 - Thread trimmer error, E02 - Sewing motor overload, E03 - Synchronizer error. Refer to the manual for full list.
How often should I clean the machine?
Clean lint and dust from the hook area, feed dogs, and bobbin case daily. Deep cleaning and oil change every 2000 hours of operation.
Can I sew leather with the D887?
Yes, the D887 is designed for heavy materials including leather. Use appropriate needles (e.g., leather point) and adjust thread tension accordingly.
Where can I download the full manual?
The official manual is available as a free PDF download on the notice-facile.com website or the Dürkopp Adler support page.
User questions about D887 Dürkopp Adler
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sewing machine in PDF format for free! Find your manual D887 - Dürkopp Adler and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D887 by Dürkopp Adler.
USER MANUAL D887 Dürkopp Adler
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dürkopp Adler
Model : D887
Category : Sewing machine