HELO-PLUSB-EU - Wi-Fi repeater STRONG - Free user manual and instructions
Find the device manual for free HELO-PLUSB-EU STRONG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater |
| Brand | Strong |
| Model | HELO-PLUSB-EU |
| Wireless Standards | IEEE 802.11 b/g/n |
| Frequency Bands | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| Coverage Range | Up to 300 m² (depending on environment) |
| Interface | 1 x 10/100 Fast Ethernet Port |
| Buttons | WPS, Reset |
| LED Indicators | Power, WLAN, WPS, Ethernet |
| Antenna | Internal |
| Power Supply | Micro USB, 5V DC / 1A |
| Power Consumption | < 5 W |
| Dimensions (W x D x H) | 65 x 40 x 100 mm |
| Weight | 80 g |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Security | WPA/WPA2, WEP |
| Operation Modes | Repeater, Access Point |
| Setup | WPS button or web interface |
| Maintenance | Clean with a dry, soft cloth. Do not use liquids. |
| Spare Parts / Repairability | No user-serviceable parts. Contact support for issues. |
Frequently Asked Questions - HELO-PLUSB-EU STRONG
How do I set up the Strong HELO-PLUSB-EU Wi-Fi repeater?
Plug the repeater into a power outlet within range of your router. Press the WPS button on your router, then within 2 minutes press the WPS button on the repeater. The LED will indicate a successful connection. Alternatively, use the web interface by connecting to the repeater's Wi-Fi and visiting 192.168.10.1.
What should I do if the repeater does not connect?
Ensure the repeater is within range of your router (about 30 meters indoors). Reset the repeater by holding the Reset button for 10 seconds. Try the WPS setup again or use the web interface to manually select your network and enter the password.
Can I use the repeater with any wireless router?
Yes, the Strong HELO-PLUSB-EU is compatible with any standard router that supports IEEE 802.11 b/g/n on the 2.4 GHz band.
How do I reset the repeater to factory defaults?
Insert a pin or paperclip into the Reset hole on the device and hold for about 10 seconds until the LEDs flash. The repeater will restart and return to factory settings.
What does the WPS button do?
The WPS (Wi-Fi Protected Setup) button allows you to quickly connect the repeater to your router without entering a password. Press it on both devices within two minutes.
Why is the Wi-Fi signal still weak after installation?
Place the repeater halfway between your router and the dead zone, away from obstacles like walls or appliances. Ensure it is powered and the LEDs indicate a strong connection. If the issue persists, reduce the distance from the router.
Does this repeater support dual-band (2.4 GHz and 5 GHz)?
No, the Strong HELO-PLUSB-EU operates only on the 2.4 GHz band. It does not support 5 GHz.
How can I update the firmware?
Visit the Strong website and download the latest firmware for HELO-PLUSB-EU. Log into the web interface (192.168.10.1), go to Administration > Firmware Upgrade, and upload the file. Do not power off during the update.
What is the maximum number of devices I can connect?
The repeater can handle up to 16 devices simultaneously, depending on network traffic and router capacity.
Is the repeater compatible with my internet provider's router?
Yes, it works with any ISP-provided router that uses standard 2.4 GHz Wi-Fi. It simply extends the existing signal, so no special setup is required.
User questions about HELO-PLUSB-EU STRONG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual HELO-PLUSB-EU - STRONG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HELO-PLUSB-EU by STRONG.