A+ Server 1113S-WN10RT - Server Supermicro - Free user manual and instructions
Find the device manual for free A+ Server 1113S-WN10RT Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Supermicro |
| Model | A+ Server 1113S-WN10RT |
| Form Factor | 1U Rackmount |
| Dimensions (W x D x H) | 17.2 x 25.6 x 1.7 inches |
| Weight | 25 lbs |
| Power Supply | 500W Redundant Power Supply |
| Processor Support | Single AMD EPYC or Ryzen |
| Memory | DDR4 ECC, up to 256GB |
| Storage Bays | 4 x 3.5" Hot-Swap SATA |
| Network | Dual 10GbE Ethernet |
| Expansion Slots | 1 x PCI-E 3.0 x16 |
| Management | IPMI 2.0 with dedicated LAN |
| Operating Temperature | 0°C to 35°C |
| Safety Compliance | UL, CE, FCC |
| Maintenance | Regular dusting, check fans, replace failed drives |
| Cleaning | Use compressed air, avoid liquids |
| Spare Parts | Power supply, fans, hard drives, memory |
| Repairability | Hot-swappable components, easy access |
| General Info | 1U rackmount server for data centers |
Frequently Asked Questions - A+ Server 1113S-WN10RT Supermicro
What is the form factor of the A+ Server 1113S-WN10RT?
The server is a 1U rackmount design, suitable for standard data center racks.
What processors are supported?
It supports a single AMD EPYC or Ryzen processor, depending on the specific motherboard revision.
How much memory can be installed?
The server supports up to 256GB DDR4 ECC memory, typically across multiple DIMM slots.
What storage options are available?
It includes 4 hot-swap 3.5-inch SATA bays, allowing easy drive replacement without powering down.
Does it have remote management capabilities?
Yes, it features IPMI 2.0 with a dedicated management LAN port for remote monitoring and control.
What network interfaces are provided?
The server comes with dual 10GbE Ethernet ports for high-speed networking.
What is the power supply configuration?
It uses a 500W redundant power supply for reliability and fault tolerance.
How often should I clean the server?
Clean the server every 3-6 months using compressed air to remove dust from fans and components. Avoid liquids.
What safety certifications does it have?
The server is certified with UL, CE, and FCC standards for safety and electromagnetic compatibility.
Are spare parts easily available?
Yes, common spare parts such as power supplies, fans, hard drives, and memory are widely available from Supermicro and third-party vendors.
User questions about A+ Server 1113S-WN10RT Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual A+ Server 1113S-WN10RT - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A+ Server 1113S-WN10RT by Supermicro.
USER MANUAL A+ Server 1113S-WN10RT Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : A+ Server 1113S-WN10RT
Category : Server