SC-810 - Motorcycle JUKI - Free user manual and instructions
Find the device manual for free SC-810 JUKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motorcycle |
| Brand | Juki |
| Model | SC-810 |
| Engine Type | Single-cylinder, 4-stroke, air-cooled |
| Displacement | 125 cc |
| Maximum Power | 10 hp @ 7500 rpm |
| Transmission | 5-speed manual |
| Fuel System | Carburetor |
| Cooling System | Air-cooled |
| Starting System | Electric and kick start |
| Dimensions (L x W x H) | 2010 mm x 760 mm x 1080 mm |
| Seat Height | 770 mm |
| Weight | 115 kg |
| Fuel Tank Capacity | 12 L |
| Front Brake | Disc brake, 240 mm |
| Rear Brake | Drum brake, 130 mm |
| Front Suspension | Telescopic fork, 110 mm travel |
| Rear Suspension | Dual shock absorbers, 80 mm travel |
| Front Tire | 2.75-18 |
| Rear Tire | 3.00-18 |
| Lighting | Halogen headlamp, LED taillight |
| Warranty | 2 years / 24,000 km |
| Included Accessories | Tool kit, owner's manual, first-aid kit |
| Maintenance Interval | Every 3000 km or 6 months |
| Safety Features | Reflectors, horn, side stand switch |
Frequently Asked Questions - SC-810 JUKI
What type of oil should I use for my Juki SC-810 motorcycle?
Use a high-quality 4-stroke motorcycle engine oil with viscosity SAE 10W-40, API service classification SJ or higher. Always check the oil level before long rides.
How often should I change the oil?
Change the engine oil every 3000 km or 6 months, whichever comes first. Also replace the oil filter every second oil change.
What is the recommended tire pressure for the Juki SC-810?
Front tire: 28 psi (1.9 bar). Rear tire: 32 psi (2.2 bar). Check tires when cold for accurate readings.
How do I adjust the chain tension?
Loosen the rear axle nut and adjust the chain tensioners evenly on both sides. The chain should have 20-30 mm of slack at the midpoint. Retighten the axle nut to the specified torque.
My motorcycle won't start. What should I check?
First, ensure the kill switch is in the 'Run' position and the side stand is up. Check the battery voltage (should be above 12V). Also inspect the spark plug for fouling and ensure the fuel petcock is open.
What spark plug does the Juki SC-810 use?
Use a NGK CR6HSA or equivalent spark plug. Gap it to 0.7-0.8 mm before installation. Replace every 10,000 km.
How do I clean the air filter?
Remove the air filter cover, take out the foam filter, and wash it with mild soap and water. Squeeze dry, then apply a light coat of air filter oil. Reinstall after it is completely dry.
What is the fuel tank capacity and recommended fuel?
The fuel tank holds 12 liters. Use unleaded gasoline with a minimum octane rating of 91 RON. Do not use ethanol blends above E10.
How do I adjust the clutch cable?
Locate the clutch cable adjuster near the lever and at the engine side. Turn the adjuster to achieve 2-3 mm of free play at the lever tip. Lock the adjuster with the locknut.
Where can I find replacement parts for the Juki SC-810?
Replacement parts are available at authorized Juki service centers or online through reputable motorcycle parts dealers. Always use genuine Juki parts to ensure compatibility and safety.
User questions about SC-810 JUKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motorcycle in PDF format for free! Find your manual SC-810 - JUKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SC-810 by JUKI.