HDFS80HS - Tumble dryer HISENSE - Free user manual and instructions
Find the device manual for free HDFS80HS HISENSE in PDF.
| Product Type | Tumble Dryer (Condenser) |
| Brand | Hisense |
| Model | HDFS80HS |
| Capacity | 8 kg |
| Dimensions (W x D x H) | 600 x 600 x 850 mm |
| Net Weight | Approx. 40 kg |
| Energy Efficiency Class | C |
| Annual Energy Consumption | Approx. 560 kWh |
| Drying Type | Condenser (Vented optional) |
| Drum Material | Stainless Steel |
| Number of Drying Programs | 15 (Cotton, Synthetics, Delicates, etc.) |
| Sensor Drying | Yes |
| Anti-Crease Function | Yes (60 min) |
| Delay Start | Yes (up to 24 hours) |
| Child Lock | Yes |
| Water Tank Capacity | 3.5 L |
| Noise Level | 65 dB |
| Power Supply | 220-240 V / 50 Hz |
| Rated Power | 2000 W |
| Heat Pump Technology | No (Standard condenser) |
| Installation Type | Freestanding |
| Maintenance | Clean lint filter after each cycle; empty water tank; clean condenser periodically |
| Spare Parts Availability | 7 years (as per EU regulations) |
| Reparability Index | 5.5 / 10 |
Frequently Asked Questions - HDFS80HS HISENSE
User questions about HDFS80HS HISENSE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Tumble dryer in PDF format for free! Find your manual HDFS80HS - HISENSE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDFS80HS by HISENSE.
USER MANUAL HDFS80HS HISENSE
Before operating this unit, please read this manual thoroughly, and retain for future reference.
HDFS80HS
HDFS80HSB
HDFS80HS*
EN
English
Thank you very much for choosing our products.
■ Please install and use this product correctly. ■ The pictures in the manual are schematic diagrams, and the appearance and printing shall be subject to the actual products. ■ The product subject to technical changes without prior notice for overall performance improvement. ■ This dryer is intended solely for household use. Please do not use it to dry clothes that are not suitable for machine wash.
The following symbols used in the manual have the following meanings:
Information, advice, tip, or recommendation
Warning - general danger
Warning - danger of electric shock
Warning - danger of hot surface
Warning - danger of fire
It is important to read the instructions carefully.
Table of Contents
| 4 SAFETY INFORMATION | INTRODUCTION | |
| 14 DESCRIPTION OF THE DRYER | ||
| 15 Technical information | ||
| 16 INSTALLATION AND CONNECTION | PREPARING | |
| 16 Selecting the room | THE DRYER | |
| 17 Dryer placement | BEFORE FIRST USE | |
| 20 Adjusting the dryer feet | ||
| 21 Changing the door opening direction | ||
| 23 Draining the condensate | ||
| 24 Connecting to the power mains | ||
| 25 Moving and transport after installation | ||
| 26 BEFORE USING THE APPLIANCE FOR THE FIRST TIME | ||
| 27 DRYING PROCESS, STEP BY STEP (1 - 4) | DRYING | |
| 27 Step 1: Heed the labels on the laundry | PROCESS, | |
| 28 Step 2: Preparing for the laundry drying process | STEP BY STEP | |
| 33 Step 3: Choosing the drying programme | ||
| 36 Step 4: Selecting additional settings and functions | ||
| 40 FUNCTION TABLE | ||
| 41 MAINTENANCE & CLEANING | ||
| 42 Cleaning the net filter in the door | DRYER | |
| 44 Cleaning of the heat exchanger | CLEANING AND | |
| 45 Emptying the condensate tank | MAINTENANCE | |
| 46 Cleaning the dryer | ||
| 47 TROUBLESHOOTING | TROUBLE- | |
| 47 What to do ...? | SHOOTING | |
| 51 Servicing | ||
| 53 TIPS FOR DRYING AND ECONOMIC USE YOUR DRYER | MISCELLANE- | |
| 54 DISPOSAL | OUS | |
Safety Information
Carefully read the instructions for use before using the dryer.
Do not use the dryer without first reading and understanding these instructions for use.
These instructions for use are supplied with different types or models of dryers. Therefore, they may include descriptions of settings or equipment that are not available on your dryer.
Failure to observe the instructions for use or inappropriate use of the dryer may result in damage to the laundry or the appliance, or injury to the user. Keep the instruction manual handy, near the dryer.
Your dryer is intended solely for household use. If the dryer is used for professional, for-profit purposes, or for purposes exceeding normal household use, or if the dryer is used by a person who is not a consumer, the warranty period shall be equal to the shortest warranty period required by relevant legislation.
The dryer is made in compliance with all relevant safety standards.
WARNING:
To reduce the risk of explosion, fire, death, electric shock, injury, or scalding to persons when using this product, follow basic precautions, including the following.
INSTALLATION
Follow the instructions for correct installation of the Hisense dryer and connection to the power mains.
For appliances with ventilation openings in the base, a carpet must not obstruct the openings.
The appliance must not be installed behind a lockable door, a sliding door, or a door with a hinge on the opposite side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted.
All repairs or maintenance tasks on the dryer should only be done by trained experts. Unprofessional repair may result in an accident or major malfunction.
- To avoid danger, a damaged power cord may only be replaced by the manufacturer, a service technician, or an authorized person.
- After installation, the dryer should stand still for two hours before it is connected to the power mains.
- At least two persons are required to install the tumble dryer on top of a washing machine.
- Install the dryer in a room with adequate ventilation and a temperature between 10°C and 25°C.
- Always use the ducts or hoses supplied with the dryer.
- Place the dryer on a level and stable solid (concrete) base.
- Do not place the dryer behind a lockable or sliding door, or a door with a hinge on the opposite side of the dryer door hinge. Install the dryer in such a way that the door can always be freely opened.
- Never block the air exhaust (evacuation opening).
- Do not place the dryer on a carpet with long fibres as this may impede air circulation.
- Air in the dryer environment should not contain dust particles.
- The appliance may not be in contact with a wall or adjacent furniture.
- This appliance must not be stored or used in any outdoor location.
- Adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances burning other fuels, including open fires.
ELECTRICAL SAFETY
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- The dryer may not be connected to the power mains using an extension cord.
- Do not connect the tumble dryer to an electrical outlet intended for an electric shaver or a hair dryer.
- The dryer is protected with an automatic switch-off system in case of overheating. This system will switch off the dryer if the temperature is too high.
- If the net filter is clogged, the overheating automatic switch-off system may be activated. Clean the filter, wait for the dryer to cool down, and try running it again. If the dryer still fails to start, call a service technician.
- Do not use multiple outlet sockets, an extension power cable or double adapter with this appliance.
- This appliance must be earthed via the power cord. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
- Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt as to whether the appliance is properly grounded.
- This appliance is equipped with a power cord having an equipment-grounding earthing pin and a grounding power plug. The power plug must be plugged into an appropriate outlet socket that is installed and grounded in accordance with all local codes and ordinances.
- Never unplug the appliance by pulling on the power cable. Always grip the power plug firmly and pull straight out from the outlet socket.
- Do not spray water inside or outside the appliance to clean it.
WARNING:
- The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
- There is a risk of electric shock as the dryer is operated with electricity.
- Check the dryer for visible damage.
- You must not operate the dryer if it is damaged.
- Before connecting the dryer to the power supply, ensure that the electric voltage specified on the rating plate matches the voltage of your socket.
- Only use residual current circuit breakers with the following symbol.
- Ensure that the mains cable is not kinked or trapped, and it does not come into contact with heat sources or sharp edges.
CHILDREN SAFETY
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Children of less than 3 years should be kept away unless continuously supervised.
- Prevent your children and pets from entering the dryer drum.
- Before closing the dryer door and running the programme, make sure there is nothing except laundry in the drum (e.g. if a child climbed into the dryer drum and closed the door from the inside).
- Do not leave the appliance door open. Children may hang on the door or crawl inside the appliance, causing damage or injury.
USE
- The tumble dryer is not to be used if industrial chemicals have been used for cleaning.
- The lint trap has to be cleaned frequently.
- Do not dry unwashed items in the tumble dryer.
- Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.
- Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.
- Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
- Remove all objects from pockets such as lighters and matches.
- Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard.
- If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent - this will reduce, but not eliminate, the hazard.
- In case of a defect, only use approved spare parts by authorized manufacturers.
- If the condensate tube is blocked or clogged, then tumble dryer operation is stopped.
- Before moving the dryer or before storing it in a non-heated room during the winter, the condensate tank has to be emptied.
- Clean the dryer filters after each drying cycle. If you have removed the filters, replace them before the next drying cycle.
- Do not use any solvents or cleaning agents that could damage the dryer (please observe the recommendations and warnings provided by the manufacturers of the cleaning agents).
- Never add chemicals or fragrances into the condensate tank.
• After the drying process, unplug the dryer power cord from the power outlet.
• The dryer uses a heat pump system to heat the air.
- The system consists of a compressor and a heat exchanger. When the dryer is started, compressor operation (the sound of flowing liquid) or flow of refrigerant may be louder as long as the compressor operates. This is not a sign of malfunction and it will not affect useful life of the dryer. In time and with use of the dryer this noise will become quieter.
- Do not drink or prepare food with the condensed water/distilled water. It can cause health problems to people and pets.
- Remove clothes from the product immediately when drying is complete or the power is turned off during the drying process. Leaving clothes that have been dried in the appliance unattended could result in fire. Clothes not removed from the appliance after drying could result in fire. Remove clothes immediately after drying, and then hang or lay the clothes flat to cool.
- Never attempt to operate the appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
- Do not attempt to separate any panels or disassemble the appliance. Do not apply any sharp objects to the control panel in order to operate the appliance.
- Never reach into the appliance while it is operating. Wait until the drum has completely stopped.
- In case of flood, disconnect the power plug and contact the After-sales Service Center.
- Do not push down on the door when the appliance door is open.
- Do not touch the power plug or the appliance controls with wet hands.
- Do not bend the power cable excessively or place a heavy object on it.
- Lint must not be allowed to accumulate around the tumble dryer.
- Keep the area underneath and around the appliance free of combustible materials such as fibres, paper, rags, chemicals, etc.
- As the dryer is heavy, you could injure yourself by trying to lift it. Do not lift the dryer on your own.
- You could cut your hands on the sharp edges of the dryer. Do not hold the dryer by the sharp edges.
- Protruding parts on the dryer may break off when it is lifted or pushed.
- Do not move the dryer by holding onto protruding parts.
- Check the dryer for damage caused during transportation. Never operate a dryer if it is damaged.
- Any residual water in the dryer may freeze and damage the dryer.
- Do not install the dryer in rooms that are at risk of frost.
The appliance contains refrigerant which, although it is environmentally friendly, is flammable R290. Failure to dispose of it properly may result in a fire or poisoning. Dispose of the appliance properly and do not damage the pipes in the refrigerant circuit.
WARNING:
Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.
WARNING:
In the appliance enclosure or in the built-in structure, keep ventilation openings clear of obstruction.
WARNING:
Do not damage the refrigerant circuit.
DANGER OF HOT SURFACE
- At higher drying temperatures, the door glass will heat up. Be careful to avoid burns. Make sure children do not play near the door glass.
- The back of the dryer may get very hot during operation. Wait for the dryer to cool down completely before touching its back side.
- If you open the dryer door during the drying process, the clothes may be very hot and there is a risk of burning.
Service
- In case of incorrect dryer connection, incorrect use, or servicing by an unauthorized person, the user shall bear the cost of any damage as such damage shall not be covered by warranty.
- The warranty does not cover consumables, minor deviations in colour, increased noise that results from appliance age and which does not affect the functionality of the dryer, and aesthetic defects on components, which do not affect the dryer's functionality and safety.
DESCRIPTION OF THE DRYER
FRONT
1 Condensate tank 2 Programme selector knob 3 Control unit 4 Door 5 Net filter 6 Air vent 7 Heat pump filter
BACK
1 Power cord 2 Condensate discharge hose 3 Adjustable feet
TECHNICAL INFORMATION
(DEPENDING ON THE MODEL)
| Rated capacity | 8kg |
| Net weight | 43kg |
| Rated Voltage | 220-240V~ |
| Rated Power | 650W |
| Frequency | 50Hz |
| Refrigerant type | R290 |
| Refrigerant Charge | 130g |
Dimensions(mm)
| Index | Dimension(mm) |
| A | 595 |
| B | 845 |
| C | 520 |
| D | 550 |
| E | 580 |
| F | 1060 |
INSTALLATION AND CONNECTION
Remove all packaging. When removing the packaging, make sure not to damage the dryer with a sharp object.
SELECTING THE ROOM
The dryer may not be in contact with a wall or adjacent furniture. For optimum dryer operation, we recommend observing the clearance from the walls as indicated in the figure. In case of failure to heed the required minimum clearance, the dryer may overheat.
- Vents on the back wall and the air exhaust opening on the front side of the dryer should never be obstructed.
The room in which you will install the dryer should be sufficiently ventilated, with a temperature between 10°C and 25°C. Dryer operation at a lower environment temperature may result in condensate accumulation in the dryer interior. Do not place the dryer into a place where there is danger of freezing. Frozen water in the condensate tank and pump may damage the dryer.
The dryer emits heat. Therefore, do not place it in a very small room, as the drying process may take longer due to limited amount of available air.
Lighting in the room should be sufficient to allow reading the information on the display unit on the control panel.
DRYER PLACEMENT
If you have a washing machine of the same brand with 550mm depth (D), this dryer can be placed on the top of it. In this case, the stacking kit must be used. Below are the steps for installation.
(1) Unscrew the four adjustable feet of the clothes dryer, put them into the foot caps respectively, and then install them back on the clothes dryer. (2) Lift the dryer onto the washing machine and place it in alignment with the washing machine. Do not place the washing machine on the dryer or install it in a staggered manner.
(3) Remove one screw connecting the lower rear cover plate and the side plate of the dryer on each side. (4) Align the stacking kit holes and the rear cover holes in a line.
(5) Screw on the removed screw and the same screw in the accessory box to fix the front of the stacking kit on one side. (6) Use the 2 special screws in the accessory box to assemble the washing machine rear cover and stacking kit.
(7) Fix the stacking kit on the other side in the same way.
At least two persons are required to install the tumble dryer on top of a washing machine.
Also you can use the dryer stacking bracket (figure a) to stacked with a washing machine of the same brand with 550mm depth (D) (figure 1). Alternatively, the dryer can be placed next to the washing machine (figure 2). You can contact aftersales for purchase figure a, and install it according to user manual.
Do not place the dryer behind lockable or sliding door, or door with a hinge on the opposite side of the dryer door hinge. Install the dryer in such way that the door can always be freely opened. Do not place the dryer on a carpet with long fibres as this may impede air circulation.
After installation, wait for 24 hours without moving the appliance before using it for the first time. If the dryer has to be laid down on one of the sides during transport or servicing, place it with its left side, viewing from the appliance front, downwards.
Level the dryer in longitudinal and traverse direction by rotating the adjustable feet which allow levelling by +/- 1 cm. Use a spirit level and spanner No. 22.
Floor on which the dryer is placed must have a concrete base. It should be clean and dry; otherwise, the dryer may slide. Also clean the adjustable feet.
The dryer must stand level and stable on a solid base.
Incorrect levelling of the dryer with the adjustable legs may cause vibration, appliance sliding across the room, and loud operation. Incorrect levelling of the dryer shall not be subject to warranty.
Sometimes, unusual or louder noise may appear during appliance operation; these are mostly the result of improper installation.
CHANGING THE DOOR OPENING DIRECTION
To change the direction of door opening, proceed as follows.
![graph LR A["Initial circular component"] --> B["Step 1"] B --> C["Step 2"] C --> D["Step 3"] D --> E["Final assembled part"]](/content/2026/06/1397500/images/7e6b9685202041dfb53ebe6089dc3bf60da257f5d6288c91190078d42161e689.jpg)
![graph LR A["Left Ring"] --> B["Intermediate Ring"] B --> C["Right Ring with Arrow indicating motion"] style A fill:#f9f,stroke:#333 style B fill:#ccf,stroke:#333 style C fill:#cfc,stroke:#333](/content/2026/06/1397500/images/e085e181178811f02e8079d8e979c7c18e1c790c31199c858aa8bfc7d1810e8e.jpg)
1 Fully open the door (take the example of reversing from left opening to right opening).
2 Unscrew the two fastening screws of the door hinge with a phillips screwdriver (or 8 mm socket spanner) to remove the whole door body.
3 Unscrew the two screws of the door hook cover plate with a phillips screwdriver, and remove the whole door hook cover plate (including the door hook).
4 Unscrew the two screws of the hinge cover plate, pull it out horizontally with a little force, and then remove the two screws (stainless steel pan head screws) on the reinforcing iron plate. And press the door body with one hand, grasp the hinge with the other hand, lift it up little by little, and slowly remove the hinge from the positioning pin. If necessary, use a flat head screwdriver to pry it.
5 Rotate the hinge assembly 180° to the other side, install the hinge assembly on the stud and press it tightly, and then tighten the two screws in the middle.
![graph LR A["Component with central rod"] --> B["Reactor with housing"] B --> C["Product with central rod"]](/content/2026/06/1397500/images/34440f4de09dc2491bc8e161b061a6fc21b09d2dd83ade37cc01f85500164b42.jpg)
6 Rotate the hinge cover plate and the door hook cover plate 180° respectively and install them at the corresponding positions on the other side of the inner frame, and then tighten the screws.
![graph LR A["Top circular component with screwdriver"] --> B["Top circular component with screwdriver"] B --> C["Bottom circular component with rectangular slots"]](/content/2026/06/1397500/images/50b43d6ff28da0f277b9f683e1587492024fd688f87a79aee568eb42a2c4d48c.jpg)
7 Remove the door lock screw of front assembly, pull down the door lock vertically by hand, take it down and rotate it 180° to the other side. Then install it to the hole of front assembly, pull it down to clamp it, and tighten the screws. Now, the reversing of door lock is completed.
8 Finally, install the door hinge on the front assembly, tighten the two screws, and close the door. At present, the door reversing (from left opening to right opening) is completed.
DRAINING THE CONDENSATE
The moisture from the laundry is extracted in the condenser unit and accumulated in the condensate tank.
During the drying process, an indicator light (symbol ◇) on the display unit warns when the condensate tank is full and needs to be emptied.
To avoid emptying the condensate tank, run the condensate discharge hose located at the back of the appliance directly into a drain.
1. Remove the discharge hose from the machine and hang it on the back.
2. Attach the hose in the attachment to the plastic opening on the discharge hose.
If you decide to run the condensate drain hose into a drain, make sure the hose is securely fastened. This will prevent any water spillage which could result in unexpected damage.
⚠️ Always use the hoses supplied with the dryer.
CONNECTING TO THE POWER MAINS
After installation, the dryer should stand still for two hours before it is connected to the power mains; this allows the dryer to stabilize.
Connect the dryer to a grounded power outlet. After installation, the wall outlet should be freely accessible. The outlet should be fitted with an earth contact (in compliance with the relevant regulations).
Information on your dryer is indicated on the rating plate (see chapter »DESCRIPTION OF THE DRYER/Technical information«).
⚠️ We recommend using over-voltage protection to protect the appliance in case of a lightning strike.
⚠ The dryer may not be connected to the power mains using an extension cord.
Do not connect the tumble dryer to an electrical outlet intended for an electric shaver or a hair dryer.
Any repair and maintenance pertaining to safety or performance should be done by trained experts.
A damaged power cord may only be replaced by a person authorized by the manufacturer.
MOVING AND TRANSPORT AFTER INSTALLATION
After every drying cycle, a small amount of condensed water will remain in the dryer. Switch on the dryer and choose one of the programmes, then let the appliance operate for approximately half a minute. This will pump out the remaining water and prevent damage to the dryer during transport. If the dryer cannot be transported in the upright position, tilt it to the left side.
Pack all the packaging material (plastic bags, other plastic parts etc.).
After transport, the dryer should be left to stand still for at least two hours before it is connected to the power mains. The appliance should be installed and connected by a trained technician.
If the appliance was not transported in compliance with the instructions, the dryer should be left to stand still at least 24 hours before it is reconnected to the power mains.
Failure to do so may result in a heat pump failure which shall not be covered by the warranty. Be careful not to damage the cooling system (see chapter »INSTALLATION AND CONNECTION/ Dryer placement«).
⚠️ Carefully read the instructions for use before connecting the dryer. Repair or any warranty claim resulting from incorrect connection or use of the dryer shall not be covered by the warranty.
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
Make sure the dryer is disconnected from the power mains; then, open the door by pulling the left side of the door towards you (figures 1 and 2).
Before using the dryer for the first time, clean the dryer drum using a soft damp cotton cloth and water (figure 3).
3
Do not use any solvents or cleaning agents that could damage the dryer (please observe the recommendations and warnings provided by the manufacturers of the cleaning agents).
DRYING PROCESS, STEP BY STEP (1 - 4)
STEP 1: HEED THE LABELS ON THE LAUNDRY
| Normal wash;Sensitive laundry | Max.washing temp.95°C95 | Max.washing temp.60°C60 | Max.washing temp.40°C40 | Max.washing temp.30°C30 | Hand wash only[3x3x] | Do not wash |
| Bleaching | Bleaching in cool water | Bleaching not allowed | ||||
| Dry cleaning | Dry cleaning with all agentsA | Petroleum solvent R11, R113P | Dry cleaning in kerosene, pure alcohol, and R113F | Dry cleaning not allowed | ||
| Ironing | Hot ironing, max.200°C... | Hot ironing, max.150°C... | Hot ironing, max.110°C... | Ironing not allowed | ||
| Drying | Dry flat (place on a flat surface)— | Drip dry||||Line dry | High temperature...Low temperature | Do not tumble dry | ||
STEP 2: PREPARING FOR THE LAUNDRY DRYING PROCESS
- Sort the laundry by type and thickness of the fabric (see PROGRAMME TABLE).
- Close the buttons and zips, tie any ribbons, and turn the pockets inside out.
- Place very sensitive clothes in a special-purpose laundry bag. (The special-purpose laundry bag is available as an optional accessory.)
Drying laundry made of particularly delicate fabrics that may be deformed is not recommended. The following types of laundry may not be dried in the dryer as this may cause your garments to deform:
• leather garments and other leather products; • garments that are waxed or treated in any other way; • garments with major wooden, plastic, or metal parts; • garments with spangles; • garments with metal parts subject to rusting.
DRYING IN A BASKET (DEPENDING ON THE MODEL)
Before the first drying cycle, remove the basket and all packaging from the drum.
Laundry may only be dried in the basket when using the timed drying programme. (The basket is available for purchase as an optional accessory at the service centre.)
1 Open the dryer door and insert the drying basket.
2 Insert the drying basket by securing it to the net filter and front support (as shown in the figure).
3 The basket can be used for drying of sports shoes, slippers, or any other item you do not wish tumbled around the dryer drum during the drying process (max. load: 2.5 kg).
4 After the drying process, remove the drying basket and close the dryer door.
Only dry clean sports shoes or slippers that have been wrung just enough to prevent water from dripping from them.
As the drum rotates, the laundry basket will be still. Therefore, make sure the items you are drying in the basket are not in contact with the drum, as this could result in damage to the item and the dryer.
SWITCHING ON THE DRYER
Connect the dryer to the power mains by plugging in the power cord.
Press the ON/OFF button to switch on the dryer (figure 1).
With some models, the dryer drum is lit as well (figure 2).
(The light in the dryer drum is not suitable for any other use.)
The light in the dryer drum may only be replaced by the manufacturer, a service technician or an authorized person.
1
2
LOADING THE DRYER
Open the dryer door by pulling the left side of the door towards you (figure 1). Insert the laundry into the drum (after making sure the drum is empty) (figure 2). Close the dryer door (figure 3).
Do not insert laundry into the dryer if it has not been wrung or spun (recommended minimum spinning cycle: 800 rpm).
Do not overload the drum! See PROGRAMME TABLE and observe your nominal load as indicated on the rating plate.
If the dryer drum is overloaded, the laundry will be more wrinkled and perhaps unevenly dried.
When drying larger items (bedding, towels etc.), loosen them and then insert them into the dryer drum.
CONTROL UNIT
1 CYCLE SELECTOR
Turn the dial to select a cycle.
2 POWER ⏻
Press to turn on/off the dryer.
5 TIME DRY +/-
Add and reduce drying time of the program.
8 NATURAL DRY
Press to select the natural dry function.
6+7 CHILD LOCK
Press these two keys at the same time to enable or disable the child lock function.
3 START/PAUSE ▶II
Start/Pause the whole machine program running.
6 DRYING TARGET
For selection of drying effect.
9 DELAY END ⓤ
Press to delay the end time of the program.
7+8 MUTE
Press these two keys at the same time to switch or restore the acoustic signals.
4 ANTI CREASE
Press to add or subtract Anti Crease function.
7 DRYING LEVEL
Press to select the degree of dryness.
10 DISPLAY
It is used to display the remaining time, fault code and other information of the program.
STEP 3: CHOOSING THE DRYING PROGRAMME
Choose the programme by rotating the programme selector knob(1) to the left or right (depending on the type of laundry and the desired level of dryness). See PROGRAMME TABLE.
PROGRAMME TABLE
Sensor dry programmes
| Programme | Type of clothes | Maximum capacity (kg) |
| Cotton | Use this programme for thicker non-sensitive cotton laundry of approximately the same thickness. | 8 |
| Delicates | Use this programme to dry highly delicate laundry made of synthetic fibres,which may be slightly moist after the drying process .We recommend using a special-purpose laundry bag. | 1 |
| Quick 30' | For quick drying of light and thin clothes. | 0.5 |
| Towels | Use this programme for drying non-sensitive items(towels,jitchen cloths...). After drying ,the items will be dry and ready to be stored in the cupbord. | 4 |
| Down Wear | Use this programme to dry textiles stuffed or padded with down(pillows, down wears, jackets etc.). Dry large items separately and use the Time Dry programme if necessary. | 2 |
| Bedding | Use the programme for larger items.When the programme is complete,it will be dry. | 2.5 |
| Sportswear | Use this programme for clothing with a mambrane,for sportswear made of mixed materials,and breathable fabrics.. | 2 |
| Shirts | Use this programme to dry shirts and blouses. | 2 |
| Mixed | Use this programme to dry mixed cotton fabrics and chemical fiber fabrics with a mild degree of fouling. | 4 |
| Baby Care | Use this programme to dry baby clothes.Clothes dried with this programme are usually normally dry. | 2 |
| Auto | Use this program for thicker non-sensitive cotton laundry of approximately the same thickness.After drying,it will be dry or slightly moist. | 4 |
Energy efficiency test program: Cotton.
Manual and special dry programs
| Programme | Type of clothes | Maximum capacity (kg) |
| Wool | This short program is intended for softening or fluffing of clothe made of wool and silk,which have to be dried thoroughly according to manufacture's instructions. | 1 |
| Time Dry | Use this programme for non-sensitive laundry that is still slightly moist and has to be thoroughly dried. In the time programme, remaining moisture is not detected automatically. If the laundry is still damp after the programme is complete, repeat the programme; if it is too dry and therefore creased and rough to touch, the drying time you selected was too long. | / |
| Rack Dry | When using this program, you can place the load to be dried (e.g., small stuffed animals, sneakers, etc.) on the drying rack for drying. | / |
| Refresh | In this programme,the heater is switched off.The programme is suitable for refreshing your laundry. | / |
| Allergy Care | For removing allergens such as mites. | 2 |
* If your laundry is not dried to the desired dryness level, use extra functions or use a more suitable programme.
STEP 4: SELECTING ADDITIONAL SETTINGS AND FUNCTIONS
Most programmes feature basic settings, but these settings can be changed.
Adjust the settings by pressing the relevant function button (before pressing the START/PAUSE button).
- Activate/deactivate the functions by pressing the desired function (before pressing the START/PAUSE button).
Certain settings cannot be selected with some programmes. Such settings will not be lit, and when the corresponding button is pressed, an acoustic signal will be emitted (see FUNCTION TABLE).
2 POWER ⏻
Press the "POWER" button to power on/off the appliance.
When the appliance is powered on, it enters standby mode with the display lit up. In the standby mode or after a program has ended, press and hold the "POWER" button to power off the appliance.
If no operation is performed within 10 minutes while in standby mode, on the End screen, or on the wash-dry retry prompt screen, the appliance will automatically power off. In the power-off state, all displays and outputs are disabled.
3 START/PAUSE
Press the "Start/Pause" key to pause or start the program.
When the program is suspended, the set functions cannot be changed. If the program or function needs to be changed during operation,
press the "POWER" to turn off the machine, and press again to turn on, select the required program and function, and finally start it.
4 ANTI CREASE
Press to add "Anti Crease" function, press twice to cancel the function, and cycle in sequence.
If the clothes cannot be taken out in time after drying, select the anti-crease program. At this time, the inner drum rotates intermittently to prevent clothes from creasing.
Touch any key or open the door to exit the anti-crease mode.
If there is no operation, the longest execution will end automatically after 12 hours by default.
5 TIME DRY +/-
Before the program starts, this function can add or reduce drying time of the program. Press continuously to cycle through the set tap positions. Different programs have different tap position settings.
This function is only applicable to the manual and special dry programs.
Sensor dry programs cannot be started.
6 DRYING TARGET
For selection of drying effect.
【☀️】 means the clothes can be stored after drying.
【】means the clothes can be worn immediately after drying.
【2】means the clothes has a small amount of water and can be ironed.
7 DRYING LEVEL
The drying level is divided into 3 levels, and the display shows 1-3 suns, which can be used to dry clothes according to the number and material of the clothes.
8 NATURAL DRY
Shirts, Mixed, and Delicates: these three programs can select this function before start, and the dryer will operate at a relatively low temperature, ensuring gentle drying.
9 DELAY END
This function allows you to delay the end time of the program.
Set the delay after selecting programs and functions. Press the delay button to increase or decrease the delay time. Each press changes the time by 1 hour, with a maximum delay of 24 hours.
The delay time is the end time of the program, including the entire program's running time, so the delay time must be longer than the program's running time.
When the Delay End function is selected (set), the Clock icon lights up; while the Delay End program is running, the Clock icon stays on or flashes (depending on the model).
After the delayed program ends, the delay icon turns off.
Before the program starts, you can cancel the selected delay by choosing another program or function key.
After the program has started, to cancel the delay, turn off and restart the dryer.
10 DISPLAY
This shows the remaining time, delay time, fault codes, and other program information.
The displayed time may differ from the actual running time. Due to factors such as clothing type, load size, moisture content after spinning, and ambient temperature, the actual drying time adjusts automatically. When the program finishes, "End" appears on the display.
Icon descriptions
| Anti crease icon. When the icon is lit up, it indicates that the anti crease function is enabled. | |
| Lint and debris cleaning icon. The flashing icon indicates that the lint and debris needs to be cleaned. | |
| Water box cleaning icon. The flashing icon indicates that the water box needs to be emptied. | |
| Clean evaporator fins. When the icon is lit up ,it indicates the dryer has used up to twenty times, evaporator fins need to be cleaned. | |
| Drum light icon. When the dryer is in running (If the knob is turned or any key is pressed), pause, program end or just turned on, drum light will illuminate for 1 minute. |
6 + 7 Child Lock
This is a safety feature. To activate it, press the "Drying Target" and "Drying Level" buttons simultaneously until the Child Lock icon lights up, and then Child Lock is enabled. Repeat the same operation to disable it.
When the Child Lock is set, all function buttons will be shielded except the power button.
After completing program, child lock will automatically unlock.
The Child Lock feature includes a memory function, and the setting will remain effective unless it is manually activated or deactivated.
After the child lock function is enabled: During running in anti crease mode, the child lock needs to be released manually, and the anti crease function ends automatically.
7 + 8 Mute
Use this to switch off or restore the acoustic signals.
When the appliance is in the state of holding, pause or operation, press "Drying Level + Natural Dry" buttons until the display show mute function icon. All the buzzing will be turned off except the alarms. When the appliance is in the mute state, repeat the same operation until mute function icon light off. All the buzzing will be activated.
The Mute feature also includes a memory function and the setting will remain effective unless it is manually turned on or off.
FUNCTION TABLE
○ Optional functions × Can not be selected
MAINTENANCE & CLEANING
Before cleaning, make sure to switch off the dryer and disconnect it from the power mains (unplug the power cord from the outlet).
The dryer is fitted with a filtering system consisting of several filters that prevent any impurities from entering the heat exchanger system.
1 Net filter
2 Heat pump filter
3 Condensate tank
The dryer may never be operated without the filters in place or with damaged filters, as excessive amounts of accumulated fibres from the fabric could cause malfunction or failure of the dryer.
CLEANING THE NET FILTER IN THE DOOR
Clean the net filter after each drying cycle.
1 Pull out the net filter.
2 Open the filter housing.
3 Gently scrape the filter to remove the lint, i.e. the lining of fibres and threads, with your hand or with a cloth.
4 If necessary, clean the filter housing and door gasket as well.
5 Insert the net filter and close the filter housing.
Make sure you do not pinch your fingers with the filter cover.
CLEANING THE HEAT PUMP FILTER
During cleaning, some water may be spilled. It is therefore recommended to place an absorbent cloth on the floor.
1 Press the buckle of the heat exchanger door cover at the lower left to open the door cover.
2 Turn the locking knob of the base filter cover to unlock position.
3 Remove the base filter cover and take out the base filter. After several times of use, clean the dust on the base filter with a wet cloth or flowing water. After using for a period of time, if there is dust on the heat exchanger, please remove the dust with tools. Do not touch the heat exchanger directly with your hands to avoid injury.
4 Install the cleaned filter and filter cover back to their original positions, lock the knob, and close the heat exchanger door cover.
Insert the heat pump foam filter into its housing and close the outer cover (push it upwards toward the machine until it latches into place).
The heat pump filter must be correctly inserted into its slot. Otherwise, the heat exchanger installed inside the dryer may become clogged or damaged.
Clean the foam filter at least after every five drying cycles.
CLEANING OF THE HEAT EXCHANGER
Do not touch the inner metal parts of the heat exchanger with bare hands. Danger of injury on sharp parts. Use appropriate protective gloves when cleaning the heat exchanger. ⚠️ Incorrect cleaning of the metal fins of the heat exchanger can permanently damage the tumble dryer. Do not press on the metal fins with hard objects like, for example, the plastic tube of a vacuum cleaner.
The dust and dirt in the metal fins of the heat exchanger can be cleaned with tools such as a vacuum cleaner, soft brush, etc.
Access to the heat exchanger is possible when the heat pump filter is removed as described in the chapter "Cleaning the heat pump filter".
Without pressing, gently move the brush attachment only in the direction of the metal fins from top to bottom. Too much pressure can damage or bend the metal fins of the heat exchanger.
We recommend cleaning the heat exchanger at least every twenty cycles.
EMPTYING THE CONDENSATE TANK
Empty the condensate tank after each drying cycle.
If the condensate tank is full, the drying programme will be paused automatically.
The symbol ⚙ will light up on the display unit, indicating that the condensate tank should be emptied.
1 Pull out the condensate tank from the dryer (using both hands as shown in the figure), then turn it upside down over a washbasin, sink, or any suitable vessel.
2,3 Empty the condensate tank. Pull out the spout at the opening for easier emptying. Replace the condensate tank.
Water from the condensate tank is not potable. If thoroughly filtered, it can be used for ironing.
⚠️ Never add chemicals or fragrances into the condensate tank.
It is not necessary to empty the condensate tank if the drain hose is connected directly to a drain (see chapter »INSTALLATION AND CONNECTION/Draining the condensate«).
CLEANING THE DRYER
Always disconnect the dryer from the power mains before cleaning.
Clean the dryer exterior using a soft damp cotton cloth.
Do not use any solvents or cleaning agents that could damage the dryer (please observe the recommendations and warnings provided by the manufacturers of the cleaning agents).
Wipe all parts of the dryer with a soft cloth until dry.
Do not clean the dryer with a jet of water!
TROUBLESHOOTING
WHAT TO DO ...?
Disturbances from the environment (e.g. the power grid) may result in various error reports (see TROUBLESHOOTING TABLE). In such case:
• Switch off the dryer and wait at least one minute. - Switch on the dryer and repeat the drying programme. • Most errors during operation can be resolved by the user (see TROUBLESHOOTING TABLE). • If the error persists, call an authorized service unit. • Repairs may only be carried out by an adequately trained person. • Repair or any warranty claim resulting from incorrect connection or use of the dryer shall not be covered by the warranty. In such cases, the costs of repair shall be charged to the user.
TROUBLESHOOTING AND ERROR TABLE
| Fault phenomenon | Recommended handling method |
| The dryer cannot be started | ◇ Check the power connection;◇ Confirm the "Start Pause" key is pressed down;◇ Confirm the door is closed properly;◇ House fuse is blown, circuit breaker has tripped, or power outage has occurred. |
| The dryer cannot be started and displays "End" | ◇ Check whether the program setting is correct;◇ Confirm there are clothes in the drum; |
| Excessive drying time | ◇ Check whether the program setting is correct;◇ Confirm whether there are too many clothes wrapping into clusters;◇ Check whether the filter screen is cleaned;◇ There will be air supply for cooling after drying in some programs; |
| Poor drying effect | ◇ Confirm that the clothes have been dehydrated;◇ Check whether the program setting is correct;◇ Confirm that there are too many clothes;◇ Load is not properly sorted. Whether clothes that are not easy to dry are mixed with clothes that are easy to dry;◇ Large load of heavy fabrics.◇ Check whether the filter screen is cleaned; |
| The remaining time of the display stops or jumps | ◇ The remaining time varies with clothing type, load, dehydration and ambient temperature, which is a normal phenomenon; |
| Clothes are wrinkled. | ◇ Clothes have dried too long. Try a shorter drying time.◇ Clothes have been left in the appliance for too long after cycle ends. |
| The dryer display shows running time different from actual program duration. | ◇ For programs that stop automatically when clothes are dry, the drying duration displayed is calculated according to standard environment, initial laundry moisture, load mass and type. The drying time is automatically adjusted for any change in conditions. The difference between the actual time and the display time is normal, which ensures the best drying effect. |
| The dryer is too loud. | ◇ Look for coins, loose buttons, nails, and other objects and remove them immediately.◇ Check the lint filter. Remove any items stuck inside the lint filter.◇ Make sure the dryer is level and standing firmly on the floor.◇ The dryer may hum due to air moving through the drum and fan. This is normal. |
| Clothes are shrinking. | ◇ Garment care instructions are not being followed. Use a low or no heat setting. |
| Lint is left on clothes. | ◇ Lint filter has not been cleaned properly.◇ Clothes have not been sorted properly.◇ Some fabrics cause more lint and should be dried separately from fabrics that lint attaches easily.◇ Tissue, paper, etc., has been left in pockets. |
| The appliance has an odour. | ◇ The smell is caused by rubber material that is attached to the appliance inside. This kind of smell is a rubber's own smell and disappears automatically after using the appliance several times.◇ When washing the clothes, use the detergent in accordance with the manufacturers recommendations. If you use the detergent excessively not according to the recommendations, undissolved detergent may accumulate on the clothes and cause an odour.◇ You can smell odours from the clothes if the clothes were left in the appliance after drying or in the washing machine after washing. Unload the clothes promptly at the end of the drying or washing cycle.◇ Ensure you can smell same odour in the washing machine. If so, clean the tub of the washing machine referring to the washing machine user manual.◇ Always take care of both lint filters clean. If any residues were left in the lint filter after drying, it may cause odours. And also dry the lint filter completely after cleaning. |
| The machine is powered on and started directly after power failure, but does not work | ◇ When the program is suspended, the set functions cannot be changed. If the program or function needs to be changed during operation, or the power is off during operation and the power needs to be powered on again, select the required program and function, and finally start it. |
| Code | Interpretation | Recommended handling method |
| F50/F51 | bnormal sensor | ◇ Please contact after-sales service. |
SERVICING
Before calling a service technician
When you contact a service centre, please state your dryer type.
Type, code/ID, model, and serial number are indicated on the rating plate.
⚠ In case of a failure, only use approved spare parts by authorized manufacturers.
⚠️ Repair or any warranty claim resulting from incorrect connection or use of the dryer shall not be covered by the warranty. In such cases, the costs of repair shall be charged to the user.
PROGRAM TABLE
The table indicates the power consumption and time values for drying of a test batch of laundry with various loads and after spinning at various rates.
The following requirements apply to the consumption values specified below.
Inlet air temperature room temperature
Inlet air humidity 50–60%
Drying temperature Normal
| Program | Amount | Spinning (rpm) | Program consumption, approximately (kWh)* | Program duration,approximately (h:min)* |
| Cotton | ⊖ | 1200 | 1.90 | 3:25 |
| ⊖ | 1400 | 1.00 1:58 | ||
| ⊖ | 1400 0.64 | 1:35 | ||
| Delicates | ⊖ | 1000 | 0.48 | 1:15 |
| Quick 30' | ⊖ | 1400 | 0.30 | 0:30 |
| Towels | ⊖ | 1000 | 1.15 | 2:15 |
| ⊖ | 1400 0.81 | 1:39 | ||
| ⊖ | 1400 0.51 | 1:10 | ||
| Bedding | ⊖ | 1400 1.26 | 2:32 | |
| ⊖ | 1400 0.75 | 1:35 | ||
| Sportswear | ⊖ | 1000 0.64 | 1:35 | |
| Shirts | ⊖ | 1000 0.34 | 0:50 | |
| Mixed | ⊖ | 1000 | 0.77 | 1:36 |
| ⊖ | 1000 0.46 | 1: | 00 | |
| Baby Care | ⊖ | 1000 | 0.72 | 1:48 |
| Auto | ⊖ | 1000 | 1.05 | 2:20 |
| ⊖ | 1400 | 0.78 | 1:50 | |
| ⊖ | 1400 | 0.51 | 1:10 |
Full load
⊖ Partial load
○ Small load
- Due to deviations in terms of type and amount of laundry, spinning, power supply oscillation, and environment temperature and humidity, the values measured at the user may differ from the one stated in the table.
TIPS FOR DRYING AND ECONOMIC USE YOUR DRYER
The most economical way of drying is to dry the recommended amount of laundry in each batch (see PROGRAMME TABLE).
Drying laundry made of particularly delicate fabrics that may be deformed is not recommended.
Use of conditioner in the washing cycle is not necessary as the laundry is soft and smooth after drying in the dryer. Drying time will be shorter and power consumption will be lower if the garments are thoroughly wrung or spun before drying. By selecting the appropriate drying programme, you will avoid over-drying your laundry and problems with ironing or shrinkage of fabric.
Regular cleaning of the filters will lead to optimum drying time and minimum power consumption.
When drying smaller amounts of laundry or individual garments, the sensor may not perceive the actual level of moisture in the laundry. In such cases, it is recommended to dry smaller items or amounts with programmes for dryer laundry or with the timed programme.
DISPOSAL
Packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately.
The symbol on the product or its packaging indicates that the product should not be treated as normal household waste. Take the product to an authorized collection centre for waste electric and electronic equipment processing.
When disposing of the dryer at the end of its useful life, remove all power cords, and destroy the door latch and switch to prevent the door from locking or latching (child safety).
Correct disposal of the product will help prevent any negative effects on the environment and health of people, which could occur in case of incorrect product removal. For detailed information on removal and processing of the product, please contact the relevant municipal body in charge of waste management, your waste disposal service, or the store where you bought the product.
Hisense
life reimagined
- SAFETY INFORMATION
- WARNING
- INSTALLATION
- ELECTRICAL SAFETY
- CHILDREN SAFETY
- USE
- DANGER OF HOT SURFACE
- SERVICE
- DESCRIPTION OF THE DRYER
- FRONT
- BACK
- TECHNICAL INFORMATION
- (DEPENDING ON THE MODEL)
- INSTALLATION AND CONNECTION
- SELECTING THE ROOM
- DRYER PLACEMENT
- CHANGING THE DOOR OPENING DIRECTION
- DRAINING THE CONDENSATE
- CONNECTING TO THE POWER MAINS
- MOVING AND TRANSPORT AFTER INSTALLATION
- BEFORE USING THE APPLIANCE FOR THE FIRST TIME
- DRYING PROCESS, STEP BY STEP (1 - 4)
- STEP 2: PREPARING FOR THE LAUNDRY DRYING PROCESS
- DRYING IN A BASKET (DEPENDING ON THE MODEL)
- SWITCHING ON THE DRYER
- LOADING THE DRYER
- CONTROL UNIT
- CYCLE SELECTOR
- POWER ⏻
- TIME DRY
- NATURAL DRY
- CHILD LOCK
- START/PAUSE ▶II
- DRYING TARGET
- DELAY END Ⓤ
- MUTE
- ANTI CREASE
- DRYING LEVEL
- DISPLAY
- STEP 3: CHOOSING THE DRYING PROGRAMME
- PROGRAMME TABLE
- STEP 4: SELECTING ADDITIONAL SETTINGS AND FUNCTIONS
- START/PAUSE
- DELAY END
- FUNCTION TABLE
- MAINTENANCE & CLEANING
- CLEANING THE NET FILTER IN THE DOOR
- CLEANING THE HEAT PUMP FILTER
- CLEANING OF THE HEAT EXCHANGER
- EMPTYING THE CONDENSATE TANK
- CLEANING THE DRYER
- TROUBLESHOOTING
- WHAT TO DO
- TROUBLESHOOTING AND ERROR TABLE
- SERVICING
- BEFORE CALLING A SERVICE TECHNICIAN
- PROGRAM TABLE
- TIPS FOR DRYING AND ECONOMIC USE YOUR DRYER
- DISPOSAL
- HISENSE
Brand : HISENSE
Model : HDFS80HS
Category : Tumble dryer