CRD-505 - Alarm clock radio DENVER - Free user manual and instructions
Find the device manual for free CRD-505 DENVER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Alarm Clock Radio |
| Brand | Denver |
| Model | CRD-505 |
| Dimensions (approx.) | 150 x 80 x 60 mm |
| Weight (approx.) | 300 g |
| Power Supply | AC 230V, 50Hz; Backup battery: CR2032 (not included) |
| Radio Bands | FM |
| Alarm Modes | Radio alarm, buzzer alarm |
| Number of Alarms | 2 (dual alarm) |
| Snooze Function | Yes, snooze duration 9 minutes |
| Sleep Timer | Yes, up to 90 minutes |
| Display | LED display with adjustable brightness |
| Clock Format | 12/24 hour selectable |
| Alarm Volume Control | Adjustable |
| Additional Features | Gradual wake-up (radio), dimmer, battery backup for clock |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use liquid cleaners. |
| Safety Precautions | Keep away from water and moisture. Do not open the device. |
| Spare Parts / Repairability | No user-serviceable parts. Contact qualified service for repairs. |
| General Information | Use only specified batteries. Unplug during thunderstorms if not in use. |
Frequently Asked Questions - CRD-505 DENVER
How do I set the alarm time on the Denver CRD-505?
Press and hold the ALARM SET button until the hour flashes, then use UP/DOWN buttons to adjust. Press ALARM SET again to set minutes, then press again to confirm.
Can I use the radio as an alarm sound?
Yes, you can select the radio as the alarm source by pressing the ALARM MODE button until the radio icon appears. The radio will turn on at the set alarm time.
What type of backup battery does the CRD-505 use?
It uses a CR2032 coin cell battery for clock backup in case of power failure. This battery is not included.
How do I switch between 12-hour and 24-hour time format?
In normal mode, press and hold the CLOCK button for 3 seconds. The display will change format. Release the button to set.
What should I do if the alarm does not sound?
Check that the alarm is set (alarm indicator on) and the volume is not set to minimum. Also ensure the backup battery is installed if AC power is off.
How do I adjust the brightness of the display?
Press the DIMMER button repeatedly to cycle through brightness levels (high, medium, low, off).
Can I set two different alarm times?
Yes, the CRD-505 has dual alarm capability. Press ALARM 1 or ALARM 2 button to set each separately.
How do I use the sleep timer?
Press the SLEEP button to activate. Each press increases the timer by 10 minutes (max 90 minutes). The radio will turn off after the set time.
Why is the display showing incorrect time?
This may happen after a power outage if the backup battery is dead. Replace the CR2032 battery and reset the clock.
How do I reset the device to factory settings?
To reset, remove both the AC adapter and backup battery, wait 30 seconds, then reconnect power. Set the time and alarms again.
User questions about CRD-505 DENVER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm clock radio in PDF format for free! Find your manual CRD-505 - DENVER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CRD-505 by DENVER.
USER MANUAL CRD-505 DENVER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DENVER
Model : CRD-505
Category : Alarm clock radio