OCX HD - Clock Antelope - Free user manual and instructions
Find the device manual for free OCX HD Antelope in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Master Clock |
| Brand | Antelope |
| Model | OCX HD |
| Category | Studio Master Clock |
| Dimensions (W x H x D) | 19 x 1.75 x 8 inches (482 x 44.5 x 203 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| Power Supply | AC 100-240V, 50/60 Hz |
| Power Consumption | 20 W max |
| Word Clock Outputs | 8 x BNC |
| Digital Audio Outputs | 2 x S/PDIF, 2 x AES/EBU |
| Word Clock Input | 1 x BNC |
| Digital Audio Inputs | 1 x S/PDIF, 1 x AES/EBU |
| Supported Sample Rates | 44.1, 48, 88.2, 96, 176.4, 192 kHz |
| Clock Jitter | <1 ps RMS |
| Clock Accuracy | <0.1 ppm |
| Display | OLED Screen |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Included Accessories | Power cable, rack ears, user manual |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids. |
| Safety | Use only the supplied power adapter. Do not open the device. |
| Repairability | Contact authorized service center. No user-serviceable parts. |
| Spare Parts | Available through authorized dealers |
| Regulatory Compliance | CE, FCC |
| Warranty | 2 years limited |
Frequently Asked Questions - OCX HD Antelope
How do I connect the OCX HD to my audio interface?
Connect a BNC cable from the Word Clock Output of the OCX HD to the Word Clock Input of your audio interface. Ensure both devices are set to the same sample rate.
What do the LED indicators on the front panel mean?
The Lock LED indicates synchronization with an external clock. The Power LED shows the unit is on. The Rate LEDs display the selected sample rate.
How do I set the sample rate on the OCX HD?
Press the Sample Rate button repeatedly to cycle through available rates (44.1, 48, 88.2, 96, 176.4, 192 kHz). The display will show the current selection.
Can the OCX HD be used as a master or slave clock?
Yes, it can operate as a master (internal) or slave (locked to an external word clock or digital input). Use the Clock Source button to toggle modes.
How do I update the firmware on the OCX HD?
Download the latest firmware from the Antelope website. Connect the unit via USB to your computer and use the Antelope Launcher software to perform the update.
What power supply does the OCX HD require?
It requires an AC input of 100-240V, 50/60 Hz. Use only the supplied power adapter to avoid damage.
How do I mount the OCX HD in a rack?
Attach the included rack ears to the sides of the unit using the provided screws. Then secure the unit in a standard 19-inch rack with four screws.
How should I clean the OCX HD?
Disconnect power. Gently wipe the surfaces with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners.
What should I do if the OCX HD is not syncing?
Check all cable connections. Ensure the Clock Source is set correctly. If using an external source, verify it is sending a valid clock signal. Try a different BNC cable.
What is the warranty period for the OCX HD?
The OCX HD comes with a 2-year limited warranty against defects in materials and workmanship. Register your product on the Antelope website to activate.
User questions about OCX HD Antelope
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Clock in PDF format for free! Find your manual OCX HD - Antelope and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OCX HD by Antelope.
USER MANUAL OCX HD Antelope
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Antelope
Model : OCX HD
Category : Clock