01529.1 - Motion detector Vimar - Free user manual and instructions
Find the device manual for free 01529.1 Vimar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Vimar |
| Model | 01529.1 |
| Product Type | Motion Detector |
| Technology | Passive Infrared (PIR) |
| Detection Range | Up to 12 meters (depending on mounting height) |
| Detection Angle | 180° |
| Power Supply | 230 V AC, 50/60 Hz |
| Standby Current | < 0.5 W |
| Operating Temperature | -20°C to +40°C |
| Dimensions (H x W x D) | 90 x 70 x 110 mm |
| Weight | Approx. 150 g |
| Mounting | Wall or ceiling mount (bracket included) |
| Light Sensitivity | Adjustable (3–2000 lux) |
| Time Delay | Adjustable (10 sec – 10 min) |
| IP Rating | IP20 (indoor use only) |
| Housing Material | Polycarbonate, UV-resistant |
| Warranty | 2 years |
| Maintenance | Clean lens with soft dry cloth; avoid solvents |
| Safety Certifications | CE, RoHS |
Frequently Asked Questions - 01529.1 Vimar
What is the maximum detection range of the Vimar 01529.1?
The maximum detection range is up to 12 meters when mounted at the recommended height of 2.5 meters.
Can the motion detector be used outdoors?
No, the Vimar 01529.1 has an IP20 rating, which means it is suitable for indoor use only.
How do I adjust the time delay?
The time delay can be adjusted via a potentiometer on the device, ranging from 10 seconds to 10 minutes.
What should I do if the detector keeps triggering falsely?
Check for heat sources like heaters or direct sunlight in the detection zone. Also ensure the lens is clean and the sensitivity is not set too high.
Is the 01529.1 compatible with LED lights?
Yes, it is compatible with most LED lights. However, avoid using with dimmable LEDs unless the dimmer is specifically designed for motion detectors.
How should I clean the motion detector?
Use a soft, dry cloth to gently clean the lens. Do not use water, solvents, or abrasive cleaners.
What is the recommended mounting height?
For optimal performance, mount the detector at a height of 2.5 meters (8.2 feet).
Can I install this detector in a bathroom?
Only if the bathroom is well-ventilated and not subject to steam or condensation. The IP20 rating does not protect against moisture.
Does the detector have a twilight sensor?
Yes, it has an adjustable light sensitivity (lux level) that prevents activation during daylight.
What is the standby power consumption?
The standby power consumption is less than 0.5 W, making it energy-efficient.
User questions about 01529.1 Vimar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual 01529.1 - Vimar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 01529.1 by Vimar.
USER MANUAL 01529.1 Vimar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vimar
Model : 01529.1
Category : Motion detector