Ronin RS 3 Pro - Camera Accessories DJI - Free user manual and instructions

Product Type	3-Axis Camera Gimbal Stabilizer
Brand	DJI
Model	Ronin RS 3 Pro
Dimensions (Folded)	268 x 280 x 75 mm
Weight (Gimbal Only)	Approx. 1.2 kg
Payload Capacity	4.5 kg (10 lbs)
Battery Type	Built-in Li-ion, 1950 mAh
Battery Life	Up to 12 hours
Charging Time	Approx. 1.5 hours
Mechanical Range	Pan: 360°; Roll: -95° to +240°; Tilt: -112° to +214°
Controllable Range	Pan: 360°; Roll: -90° to +180°; Tilt: -90° to +180°
Connectivity	Bluetooth 5.0, USB-C, RSS Port, Camera Control Port
Operating Temperature	-20°C to 45°C
Protection Level	IP54 (Limited Dust and Splash Resistance)
Key Features	Auto-Lock, 4th Axis Stabilization, LiDAR Focus, Dual Handgrip
Compatibility	DSLRs, Mirrorless Cameras, Cinema Cameras up to 4.5 kg
Maintenance	Clean with soft cloth; avoid solvent; store in dry cool place
Spare Parts Available	Yes (batteries, cables, mounting plates)
Warranty	Standard 1-year manufacturer warranty

Frequently Asked Questions - Ronin RS 3 Pro DJI

What is the maximum payload of the DJI Ronin RS 3 Pro?

The maximum payload is 4.5 kg (10 lbs), suitable for most DSLRs, mirrorless cameras, and compact cinema cameras.

How do I balance my camera on the Ronin RS 3 Pro?

Balance the camera by adjusting the tilt, roll, and pan axes. Use the Auto Balance function after mounting the camera for quick calibration.

Can the Ronin RS 3 Pro be controlled remotely?

Yes, via the DJI Ronin app over Bluetooth or using optional accessories like the DJI Master Wheels or Force Pro.

What is the battery life and charging time?

Battery life is up to 12 hours of normal use. Charging takes approximately 1.5 hours via USB-C.

Does the Ronin RS 3 Pro support LiDAR focusing?

Yes, it is compatible with the DJI RS LiDAR Range Finder for auto-focus with select cameras and lenses.

How do I update the firmware?

Connect the gimbal to the DJI Ronin app and follow the prompts to update to the latest firmware.

What cameras are compatible?

It works with most cameras under 4.5 kg, including popular models from Canon, Sony, Nikon, Panasonic, Fujifilm, and RED.

Is the gimbal water-resistant?

It has an IP54 rating, meaning limited protection against dust and splashes. Avoid heavy rain or submersion.

How do I activate the auto-lock feature?

The Auto-Lock engages automatically when the gimbal is placed on a flat surface. You can also lock it manually via the side button.

Can I use the Ronin RS 3 Pro with a dual handgrip?

Yes, the Dual Handgrip accessory is supported for two-handed operation, providing extra stability.

USER MANUAL Ronin RS 3 Pro DJI

Searching for Keywords

Search for keywords such as "battery" and "install" to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.

Navigating to a Topic

View a complete list of topics in the table of contents. Click on a topic to navigate to that section.

Printing this Document

This document supports high resolution printing.

Using this Manual

Legend

Warning Important Hints and Tips Reference

Before You Begin

The following documents have been produced to help you safely operate and make full use of your DJI RS 3 Pro.

DJI RS 3 Pro Quick Start Guide

DJI RS 3 Pro User Manual

DJI RS 3 Pro Safety Guidelines

Read the entire quick start guide and user manual and watch the informational and tutorial videos on the product page of the DJI official website (https://www.dji.com/rs-3-pro). Read the safety guidelines to understand your legal rights and responsibilities. If you have any questions or problems during the installation, maintenance, or use of this product, contact DJI or a DJI authorized dealer.

Download the Ronin App and Watch the Tutorial Videos

iOS 11.0 or above

Android 7.0 or above

Contents

Using this Manual 2

Legend 2

Before You Begin 2

Download the Ronin App and Watch the Tutorial Videos 2

Introduction 4

DJI RS 3 Pro Diagram 5

Using For The First Time 6

Charging the Battery 6

Attaching the Extended Grip/Tripod 6

Activation 7

Firmware Update 7

Mounting the Camera 8

Balancing 11

Briefcase Mode 14

Auto Tune 14

Operations 15

Button and Port Functions 15

Touchscreen 17

Ronin App Settings 22

BG30 Grip and Built-In Battery 33

Operation Modes 36

Maintenance 36

Specifications 37

Introduction

The DJI RS 3 Pro is a professional single-handed 3-axis gimbal specifically designed for DSLR and small cinema cameras. It is compatible with a wide range of mainstream cameras using a 24-70mm F2.8 lens and supports a tested payload of up to 4.5 kg. The DJI RS 3 Pro boasts enhanced gimbal performance thanks to the 3rd-Gen RS Stabilization Algorithm.

With the brand-new automated axis locks, the DJI RS 3 Pro enables faster and more convenient installation, balancing, and storage. With a 1.8-inch OLED full-color touchscreen, users can calibrate the gimbal and set parameters. The onboard buttons allow users to control the gimbal movement, photo capture, recording, and camera focus. By implementing Dual-Mode Bluetooth, the RS 3 Pro supports wireless shutter control. The onboard RSA/NATO port supports the DJI R Focus Wheel, DJI RS Briefcase Handle, and DJI R Twist Grip Dual Handle. The detachable grip has a built-in battery with a capacity of 1950 mAh, providing a maximum standby time of up to 12 hours.*

After connecting to the Ronin app, easily control gimbal movement and parameter settings. With the DJI Ronin Image Transmitter mounted, users can shoot smooth footage while automatically tracking a subject with ActiveTrack Pro.

RS 3 Pro uses the DJI LiDAR Range Finder (RS) and DJI RS Focus Motor (2022) to enable autofocus with manual lenses.

With the DJI Video Transmitter mounted, RS 3 Pro can use DJI Master Wheels and DJI Force Pro to control the gimbal and camera. Connect the DJI Remote Monitor and Ronin 4D Hand Grips to the RS 3 Pro for monitoring and remote control.

* Measured with the equipment in a level and stationary state, the gimbal balanced, three axes in an active state, and the battery only powering the gimbal.

DJI RS 3 Pro Diagram

1. Upper/Lower Quick-Release Plate
2. 1.8-inch OLED Full-Color Touchscreen
3. Joystick
4. Camera Control Button
5. BG30 Grip (Built-in battery with 1/4"-20 screw hole)
6. Extended Grip/Tripod
7. M Button
8. Power Button
9. Gimbal Mode Switch
10. Ronin Series Accessories (RSA)/NATO Ports
11. Pan Lock
12. Pan Motor
13. Tilt Lock
14. Tilt Motor
15. RSS Camera Control Port (USB-C)
16. Focus Motor Port (USB-C)
17. Video Transmission/LiDAR Range Finder Port (USB-C)
18. Front Dial
19. Trigger
20. Power Port (USB-C)
21. Battery Level Button
22. Battery Level Indicators
23. Grip Lever/Safety Button
24. Roll Lock
25. Roll Motor

Using For The First Time

Charging the Battery

Before using for the first time, charge the battery grip through the power port using a charging cable (included) and a USB adapter (not included). It is recommended to use a USB adapter with QC 2.0 and PD protocol (max. 24 W).

During charging and usage, the battery level indicators indicate the battery level. When not in use, press the battery level button to check the battery level.

Attaching the Extended Grip/Tripod

1. Attach the extended grip/tripod to the grip ①, tighten, and then unfold the tripod. ③
2. Insert the grip into the gimbal as shown ④. Make sure the grip lever is in the unlocked position, and then toggle to the locked position after attaching ⑤.

To remove the grip, toggle the lever to the unlocked position, hold down the safety button, and pull the grip away from the gimbal.

Activation

Activation is required for DJI RS 3 Pro through the Ronin app. Follow the steps below to activate RS 3 Pro:

1. Press and hold the power button to power on RS 3 Pro, and select the language on the touchscreen.
2. Scan the QR code on the screen to download the Ronin app. If the activation step is skipped, the gimbal will unlock automatically and prompt on-screen instructions.
3. Enable Bluetooth on the mobile phone. Launch the Ronin app and log in with a DJI account. Select DJI RS 3 Pro, type in the default password 12345678, and activate the gimbal according to the instructions. An internet connection is required for activation. The gimbal will unlock automatically after activation is successful.

DJI RS 3 Pro supports up to five uses without activation. After that, activation is required for further use.

Firmware Update

If new firmware is available, you will be notified by the Ronin app. Update the firmware according to the on-screen instructions. Do not power off the gimbal or exit the app during the firmware update.

The Ronin app will prompt if the update is successful. If the update fails, restart the gimbal and Ronin app, and try again.

• Make sure the gimbal has sufficient power before updating. - Ensure the mobile phone is connected to the internet when updating. - Do not power off the gimbal when updating. - The axis locks will lock automatically when the update starts. It is normal for the axis locks to lock or unlock during the process.

Mounting the Camera

Supported Cameras and Lenses

DJI RS 3 Pro has been rigorously tested to support a payload of 4.5 kg. Make sure the combined weight of the camera, lens, and other accessories are within 4.5 kg. Refer to the official DJI website (https://www.dji.com/support/compatibility) for the most updated Ronin Series Compatibility List.

Mounting a Camera

Make sure to prepare the camera before mounting it to DJI RS 3 Pro. Remove the lens cap and check that the battery and memory card are inserted in the camera.

Make sure DJI RS 3 Pro is powered off or in sleep mode before mounting the camera. Toggle the tilt lock and roll lock to the unlocked position and adjust the gimbal position as shown, and then toggle the two locks to the locked position.

1. Attach the Upper Quick-Release Plate

Attach the upper quick-release plate to the camera by tightening the screw.

2. Attach the Lower Quick-Release Plate and Lens-Fastening Support

Toggle the lever on the lower quick-release plate to the unlocked position ①, then insert the camera ② and toggle the lever to the locked position ③ after it is engaged. Attach the lens-fastening support to the lower quick-release plate ④.

It is recommended to use the lens-fastening support when using a long or heavy lens, and always use the lens-fastening support before enabling SuperSmooth mode.

To remove the camera from the lower quick-release plate, toggle the lever to the unlocked position and remove the camera while pressing the safety lock beside the lever.

3. Attach the Camera to the Gimbal

Toggle the lever on the camera mounting plate to the unlocked position ① and insert the lower quick-release plate ②. Toggle the lever to the locked position ③ once the camera is roughly balanced.

To remove the lower quick-release plate, toggle the lever on the camera mounting plate to the unlocked position and remove the lower quick-release plate while pressing the safety lock on the mounting plate.

4. Connecting a Camera

DJI RS 3 Pro supports wireless camera connection using Bluetooth, camera control is available without a cable connection. Swipe down from the top of the touchscreen on the Home screen to enter the Control Center. Tap the Bluetooth icon and tap connect, the gimbal and camera will start to pair. The Bluetooth icon turns blue indicating connection is successful.

For Sony-series cameras, remote Bluetooth control needs to be enabled before connecting to the gimbal.

For Canon-series cameras, remote control mode for photo or record mode needs to be enabled before connecting to the gimbal.

For BMPCC-series cameras, the password is required before connecting to the gimbal.

Refer to the Ronin Series Compatibility list for more camera settings when using a Bluetooth connection.

Choose the proper camera control cable for cameras that do not support Bluetooth according to the camera type. Plug one end of the cable into the camera and plug the other end into the RSS camera control port of the gimbal.

• Refer to the Ronin Series Compatibility list for supported camera models. - Some camera control cables need to be purchased separately.

Balancing

To get the best performance from the DJI RS 3 Pro, proper balancing is essential. Proper balance is critical for shots where fast motion or acceleration is required, and it also extends battery life. Before powering on the DJI RS 3 Pro and setting up the software, you need to balance three axes properly.

Before Balancing

1. The camera must be fully configured, with all accessories and cables connected, before installing and balancing it on the gimbal. If the camera has a lens cap, remove it before balancing. Before balancing, make sure to power on the camera if using an optical zoom lens, and select the focal length if using a varifocal lens.
2. Make sure to balance the gimbal with all accessories mounted. Refer to the corresponding accessory user guide for installation steps.
3. Make sure the DJI RS 3 Pro is powered off or in sleep mode before balancing.

Balancing Steps

The balancing steps are the same with or without accessories mounted.

1. Balancing the Vertical Tilt

a. Unlock the tilt axis ① and loosen the mounting plate knob ②. b. Rotate the tilt axis so that the camera lens is pointing upward. Check to make sure the camera is not top- or bottom-heavy. If top-heavy, move the camera backward ③. If bottom-heavy, move the camera forward ③. c. Tighten the mounting plate knob while holding the camera upward. The vertical tilt is balanced when the camera is steady while pointing upward.

2. Balancing Depth for the Tilt Axis

a. Rotate the tilt axis so that the camera lens is pointing forward. Toggle the lever to the unlocked position ①. b. Check to make sure the camera is not front- or back-heavy. If front-heavy, move the camera backward by turning the knob ②. If back-heavy, move the camera forward. c. Toggle the lever to the locked position. The tilt axis is balanced when the camera is steady while tilted up or down by 45°. d. Lock the tilt axis.

3. Balancing the Roll Axis

a. Unlock the roll axis ①. Toggle the lever on the roll arm to the unlocked position ②. b. Check the direction in which the roll motor swings. If the camera rotates to the left, move the camera to the right ③. If the camera rotates to the right, move the camera to the left ③. c. Toggle the lever on the roll arm to the locked position. The roll axis is balanced when the camera is steady. d. Lock the roll axis.

4. Balancing the Pan Axis

a. Unlock the pan axis ①. Toggle the lever on the pan arm to the unlocked position ②.

b. While holding the grip, tilt DJI RS 3 Pro forward, and rotate the pan arm until it is parallel with you.

c. Check the movement of the pan axis. If the camera lens rotates to the left, push the pan axis to the right ③. If the camera lens rotates to the right, push the pan axis to the left ③.

d. Toggle the lever on the pan arm to the locked position. The pan axis is balanced when the camera is steady when rotating the pan while tilting the grip.

- If mounting a longer camera system, it is necessary to use DJI R Roll Axis Counterweight Set. Visit the official DJI store to purchase the counterweight set.

• The levers on the pan and roll motor can be pulled out to adjust the tightness.

Briefcase Mode

The briefcase handle helps to switch to briefcase mode after balancing. The angle of the briefcase handle can be adjusted using the knob. The built-in cold shoe mount and 1/4"-20 mounting hole can connect to external monitors for shooting assistance, making low-angle camera movements more intuitive.

Auto Tune

Auto tune provides the proper stiffness for the motor according to the payload to obtain the optimum gimbal performance. The gimbal is ready to be used after auto tune.

Press and hold the power button to power on the gimbal, or press once or twice to exit sleep mode, then press and hold the M button and trigger simultaneously to start auto tune. Auto Tune also can be enabled by tapping the auto tune icon 📋 on the touchscreen.

Place the gimbal on a steady flat surface. Do not move the gimbal during auto tune. It is normal for the gimbal to shake or make sounds during auto tune.

Operations

Button and Port Functions

Power Button

Press and hold to power on or off. Press once or twice to enter or exit sleep mode.

Gimbal Mode Switch

Toggle to switch gimbal mode from PF, PTF, and FPV.

Camera Control Button

After connecting the camera, press halfway for autofocus. Press once to start or stop recording. Press and hold to take a photo.

Check the Ronin Series Compatibility list for detailed information on supported camera features.

M Button

Press once to lock or unlock the screen by default. The settings can be changed via the touchscreen.

Press and hold to enter Sport mode. Press and hold and press the trigger twice to remain in Sport mode. Repeat to exit Sport mode. In Sport Mode, the follow speed of the gimbal increases greatly. It is suitable for shooting in scenarios where subjects move suddenly and at fast speeds.

Press and hold the M button together with the trigger to begin auto tune.

Joystick

Push up or down to control the movement of the tilt axis (default setting). Push left or right to control the movement of the pan axis (default setting).

Joystick control mode and direction can be set in Ronin app.

Trigger

Press and hold to enter Lock mode. Tap the touchscreen to stay in lock mode, then the trigger can be released.

Tap twice to re-center the gimbal.

Tap three times to turn the gimbal 180° so that the camera faces you (selfie mode).

Tap once to start ActiveTrack (requires DJI LiDAR Range Finder (RS) or DJI Ronin Image Transmitter to be enabled).

Front Dial

Turn to control cable-driven focus/zoom by default, the settings can be changed via the touchscreen.

Check the Ronin Series Compatibility list for detailed information on supported features.

Battery Level Button

Press once to check battery level.

RSS Camera Control Port: for connecting the camera.

Focus Motor Port: for connecting the focus motor.

Video Transmission/LiDAR Range Finder Port: for connecting the DJI Video Transmitter, DJI Ronin Image Transmitter, or DJI LiDAR Range Finder.

Ronin Series Accessories (RSA)/NATO Ports

For connecting the DJI R Focus Wheel, DJI R Twist Grip Dual Handle or the DJI RS Briefcase Handle.

Automated Axis Locks

The Automated Axis Locks are set to fold and lock when powering on/off and recenter and lock when RS 3 Pro enters/exits sleep mode. Axis locks will unlock automatically after powering on and will lock by pressing once or twice on the power button. Set the axis locks movement on the touchscreen menu. The axis locks can be locked/unlocked manually.

Touchscreen

Home

Camera Status: indicates a camera control cable or Bluetooth is connected.

Battery Level: displays the current battery level of the gimbal. Icon 🎨 indicates the battery is charged with a normal charger. Icon 🔒 indicates the battery is charged with a quick charger.

Auto Tune

Use auto tune after balancing. The stiffness value is determined by the payload of the gimbal. Use Auto Tune to obtain the stiffness value automatically after balancing.

The three values indicate the stiffness of the three axes on the auto tune page. Select from Normal and SuperSmooth mode. Normal mode is suitable for most scenarios, and SuperSmooth mode is for fast-moving scenarios. It is recommended to use lens-fastening support when using SuperSmooth before auto tune. The auto tune process takes approximately 15 to 30 seconds.

The motor stiffness adjustment allows you to fine-tune the power that is applied by the motors as they react and balance the weight on each axis. Make sure you leave an extra margin to ensure stability at all times. If the stiffness value is too high the gimbal may shake and if the value is too low the gimbal performance will be affected.

Use auto tune after balancing the camera, changing the lens focal length, or if the gimbal shakes after changing lenses.

Balance Status

When the status bar shows green, this indicates the gimbal is balanced. If the status bar shows yellow, the gimbal is slightly unbalanced. The status bar shows red when the gimbal is critically unbalanced. In this case, re-balance the corresponding axis. To check the balance status of the pan axis, tilt the gimbal 15 degrees left or right and check the status bar.

Follow Mode

The default follow modes can be switched from PF, PTF, and FPV through the Gimbal Mode Switch. The tilt motor controls the tilt axis to follow, pan motor controls the pan axis to follow, and roll motor controls the roll axis to follow.

PF: pan follow, where only the pan axis follows the movement of the grip. Suitable for scenarios such as shooting emerging walk-through and arc shots or moving from left to right.

PTF: pan and tilt follow, where both the pan and tilt axes follow the movement of the grip. Suitable for scenarios when moving up and down or on a slant.

FPV: pan, tilt, and roll follow, where all three axes follow the movement of the grip. Suitable for scenarios when rotating the camera or shooting from a low angle. In FPV mode, select from 3D Roll 360, Portrait, and Custom mode.

3D Roll 360: enables footage to be shot while rotating the camera 360°. The tilt axis will rotate 90° so that the camera lens will point up. Push the joystick to the left or right to begin 3D Roll 360. Push the joystick to the left or right twice in quick succession to trigger auto rotation. During auto rotation, press the trigger twice or three times and the camera will stop.

Portrait: enables shooting footage in portrait mode. The tilt axis will rotate 90° so that the camera lens will point up, and the pan axis will also rotate 90° while capturing footage in portrait.

Custom: enables or disables any axis follow as required. Lock mode is enabled when the three axes are disabled. All three axes will not follow the movement of the grip in lock mode.

Hold the gimbal vertical to shoot in Portrait mode. The joystick cannot control the gimbal movement in Portrait mode.

Follow Speed

Tap to select follow speed. Users can choose fast, medium, slow, and custom. Tap the icon on the top-right of the touchscreen to customize the speed.

Slide Up: Gimbal Settings Screen

Slide up from the bottom of the screen to enter the gimbal settings screen.

Joystick Speed: allows users to control the speed of the joystick for the gimbal. Users can select from fast, medium, slow, and custom. Tap the icon on the top-right of the touchscreen to customize the speed. The larger the value, the faster the joystick speed.

Joystick Smoothness: allows users to control the sensitivity of the gimbal. The lower the smoothness value, the more sensitive the movement of the gimbal.

Dial Functions: allows users to set the function of the front dial. Users can choose to control the focus motor, cable-driven focus/zoom, ISO, aperture, shutter speed, roll axis, pan axis, and tilt axis.

Dial Speed: allows users to set the response speed of the function set for the front dial.

Dial Smoothness: the larger the smoothness value, the smoother the movement changing.

Reverse Dial: the direction of the dial can be set to reverse.

M Button: features can be set to screen lock, photo capture, or LiDAR AF/MF (switch between auto focus and manual focus with DJI LiDAR Range Finder mounted).

Slide Down: Control Center Screen

Slide down from the top of the screen to enter the control center screen.

Screen Lock

Tap the screen lock to lock the touchscreen to avoid unexpected operation. Slide up to unlock the touchscreen after enabling screen lock.

Bluetooth

Tap the icon to connect the camera via Bluetooth. Tap Connect to pair the Bluetooth of the gimbal and camera. The icon turns blue after connecting successfully.

The gimbal can only connect to one camera at a time.

Silent Mode

Enable to turn off sounds including the alert tone. The sounds of the motor and axis locks cannot be muted.

System Settings

Disable Selfie: prevents accidentally entering selfie mode and interrupting recording. If disabled, selfie mode will not be entered if the trigger is pressed three times.

Orbit Follow: obtain smoother movements after enabling when shooting arc shots.

Auto Lock: can be set to recenter and lock, fold and lock, or have no movement when powering on/off. Can be set to recenter and lock or have no movement when entering or exiting sleep mode.

Push Mode: enable to manually control the tilt and pan axis.

Horiz Calibration: use if the gimbal is unlevel when the gimbal is steady. If the issue persists, use Tune Manually.

Focus Motor Endpoints: focus motor calibration can be selected, and the endpoints of the focus motor can be set manually or be disabled.

Gimbal Auto Check: tap to analyze and output the status information of the gimbal.

Restore Parameters: tap to restore the gimbal parameters and Bluetooth password to default settings.

Language: choose the onscreen language from Chinese (Simplified), English, Chinese (Traditional), Japanese, Korean, French, German, Brazilian Portuguese, Spanish, Thai, and Russian.

Device Info: displays the SN, Name and Bluetooth information.

Firmware Version: displays the firmware version of the gimbal and the attached accessories.

Slide Left: Create Screen

Slide left from the right edge of the screen to enter the Create screen.

Timelapse

In Timelapse, DJI RS 3 Pro triggers the camera to capture still images at the set interval time and will automatically stop when completed. The duration for the Timelapse and the interval time can be set so that DJI RS 3 Pro can calculate the exact number of images required, and the duration of the video can be calculated after the frame rate is set.

Motionlapse allows users to set up to five waypoints so that the camera moves and shoots during the Timelapse.

Track

Track is designed to capture video with up to 10 waypoints. The waypoint needs to be selected by manually moving the gimbal or using the joystick. Tap + to add a waypoint.

The duration and stay time can be set on the waypoint settings screen after a waypoint is added and the position of the waypoint also can be reset. The duration indicates how much time it will take for the gimbal to travel from one waypoint to the next. The stay time indicates how long the gimbal will remain steady at the waypoint before moving to the next waypoint.

Panorama

Panorama allows users to capture a series of interconnecting still images with precise control based on the settings. Users can then generate a panorama using image processing software. The camera captures interconnecting still images based on the setting range when selecting 3x3 or 180° panorama. When creating a 720 VR panorama, users need to set the sensor type, lens focal length, overlap, and interval. When creating a custom panorama, users need to set the shooting range, sensor type, lens focal length, overlap, and interval.

The interval time between shooting photos should be set to one second more than the shutter time to avoid blurred footage when using a long exposure.

Slide Right: LiDAR/Video Transmission Screen

Slide right from the left of the screen to enter the LiDAR/Video Transmission screen.

If no device is connected, "No Signal Input" will display on the screen.

When using the DJI LiDAR Ranger Finder, autofocus and ActiveTrack Pro are available.

ActiveTrack and Force Mobile are available if the camera view is displayed on the touchscreen and the Ronin app when using the DJI Ronin Image Transmitter.

Refer to the DJI LiDAR Range Finder (RS) and DJI Ronin Transmitter user guides for more information.

Ronin App Settings

The Ronin App contains the features of the touchscreen as well as more features of the gimbal and the DJI Ronin Image Transmitter. The screenshots below are based on the iOS version of the app.

Top Bar

Sleep/Wake: tap to enter or exit sleep mode.

Follow Mode: display the current follow mode.

Battery Level: displays the battery level of the gimbal.

About

Settings: view your account, language, and the quick start guide.

Device List: displays the device SN, device name and password.

Firmware: displays the firmware version.

Academy

Watch the tutorials and read the manual documents.

Create

Virtual Joystick

Use the virtual joystick in the app to control the movement of the gimbal and to shoot.

1. Control Bar: control the speed and smoothness of the gimbal by adjusting the control bar. Speed allows users to adjust the remote-controlled rotational speed. Smoothness allows users to adjust the sensitivity of the gimbal. The lower the smoothness value, the more sensitive the movement of the gimbal.
2. Roll Stick: control the roll axis movement of the gimbal using the virtual joystick.
3. Pan/Tilt Stick: control the pan and tilt axis movement of the gimbal using the virtual joystick.
4. Recenter: tap to recenter the gimbal.
5. Shoot/Record Button: tap to take photos or record videos.
6. Photo/Video Toggle: tap to switch between photo and video modes. Make sure the mode is the same as the settings on the camera.

Force Mobile

Force Mobile requires the phone holder and a mobile phone mounted on a tripod or handlebar vertically. After enabling this feature in the Ronin app, the gimbal movement can be controlled by tilting and rotating your mobile phone.

Speed determines the relationship between the rotational speed and angle. When the speed is set to 50, the angle of rotation for the gimbal and mobile phone is 1-to-1. The gimbal will move at an identical angle to the mobile phone. When the speed is set to less than 50, the gimbal will rotate slower than the movement of the phone. When the max speed is set higher to a higher value than 50, the rotation of the gimbal is faster than the mobile phone.

Smoothness allows users to control the sensitivity of the gimbal. The lower the smoothness value, the more sensitive the movement of the gimbal.

Recenter: tap to recenter the gimbal.

Shutter/Record Button: tap to take photos or record videos.

Panorama

Panorama allows users to capture a series of interconnecting still images with precise control based on the sensor type, lens focal length, overlap, and interval.

Make sure you have connected the camera and gimbal using the corresponding camera control cable before using Panorama (Bluetooth connection is not supported).

Overlap determines the overlap ratio of every photo when generating a panorama.

The interval time between shooting photos should be set to one second more than the shutter time to avoid blurred footage when using a long exposure.

After confirming the camera settings, the panorama range can be set by dragging the white dots on the grid map, pushing the gimbal manually, or using the virtual joystick.

The total range covered by the endpoints and the shots required to compose the panorama is displayed above the grid map. The tilt axis range in Panorama is -45° to +90° in order to avoid capturing the gimbal in the shot, while the pan axis allows you to capture a full 360° rotation.

Tap the shutter/record button to begin.

Timelapse

In Timelapse, DJI RS 3 Pro triggers the camera to capture still images with the set interval time and will automatically stop when completed. The duration for the Timelapse and the frame rate can be set so that DJI RS 3 Pro can calculate the exact number of images required.

By enabling Push mode, users can manually adjust the pan and tilt axes before starting the Timelapse. Users can push DJI RS 3 Pro to alter the camera orientation and adjust the framing. Tap the virtual joystick icon to use the virtual joystick to adjust the camera orientation.

Motionlapse allows users to set up to five waypoints so that the camera moves during the Timelapse.

To adjust the position of a waypoint, adjust the camera to the desired position, and tap the + icon to confirm the waypoint. You can also use the virtual joystick to control the pan, tilt, and roll axis as well.

To add another waypoint, move the gimbal to the next waypoint, and tap the + icon above the grid map. Afterwards, to delete a waypoint, select the waypoint and tap the trash icon. After setting up the waypoints, you can either tap Preview to make sure the Motionlapse includes everything or tap the shutter/record button to start shooting. Make sure the camera and gimbal have been connected using the corresponding camera control cable.

Zoom control is not supported while using the DJI Focus Motor (2022) during Timelapse.

Track

Track is designed to capture video with up to 10 waypoints. Users need to select the waypoint manually by moving the gimbal or using the virtual joystick. Tap + to add a waypoint. The duration and stay time can be set on the waypoint settings screen after a waypoint is added and the position of the waypoint also can be reset. The duration parameter below the grid map indicates how much time it will take for the gimbal to travel from one waypoint to the next. The stay time indicates how long the gimbal will remain steady at the waypoint before moving to the next waypoint.

DO NOT press the shutter button of the camera while using Track.

Gaming Controller

PS4 DualShock and Xbox controllers can be used to control the gimbal and camera. After connecting the controller to the mobile device and gimbal, users can control gimbal movements, focus, and zoom, and can record videos, recenter gimbal, and capture photos.

The speed and smoothness of the control sticks can be adjusted. Set the focus value within 10 on the camera settings for optimal performance. iOS 13 or higher, Android 9.0 or higher, and Ronin app v1.4.0 or higher are required.

Tap How to Use to learn more about the gaming controller.

Focus Control

Drag the white dot to control the focus after mounting the DJI RS focus motor. 0-100 indicates the A and B endpoints of the focus motor. Tap the record button to start/stop recording. Tap the Virtual Joystick icon to control the gimbal movements.

Balance Adjustment

Watch the tutorial videos on this page.

Motor Parameters

There are Basic and Advanced menus. Stiffness can be displayed and adjusted in the Basic menu. In addition, Strength can be adjusted in the Advanced menu (do not adjust if not necessary).

Tap Auto Tune and DJI RS 3 Pro automatically calculates the result based on the weight of the gimbal setup.

After auto tune, you can see detailed motor diagnostics at the bottom of the screen. If the gimbal is properly balanced, the power value of the motors should be in the range of ±5. If power consumption on a particular axis constantly goes beyond that range, check the mechanical balance of the gimbal.

User Profile

Gimbal mode, follow speed, deadband, push mode and joystick control can be set in this page. Deadband determines how much movement the gimbal tolerates prior to translating the pan, tilt, and roll movement of the camera.

Control Settings

Channels

The channel indicator provides feedback when configuring remote operation. Pan, tilt, and roll channels can be reassigned and each axis can also be inverted. Normal means the direction of movement is the same as the joystick. Inverted means the direction of movement is the opposite of the joystick.

When using the joystick, you can only control CH1 and CH3, which is mapped to tilt and pan axes by default. You can customize channel mapping by tapping on the name of the axis on the right of the screen.

Motion

You can set the joystick control by adjusting deadband, max speed, smoothness, and endpoints for each axis. There are three default profiles for each settings.

Deadband: when the deadband value increases, more stick movement will be required to translate into the actual movement of the gimbal.

Max Speed: allows the remote-controlled rotational speed to be adjusted.

Smoothness: allows you to control the sensitivity of the gimbal.

Endpoint: limits the rotational range of the gimbal by setting the endpoints. The pan axis has a slip-ring, enabling DJI RS 3 Pro to rotate continuously when the endpoints are set to 180°. On the tilt axis, you can set up the endpoints according to your requirements. Some longer lenses may hit the gimbal frame. Set the endpoint angle to prevent such cases.

Status

Settings

Use more features such as Motor Pause, Silent Mode, System Calibration, Horizontal Calibration, and Restore Gimbal Setup.

Checklist

Displays the connection status of the Bluetooth and camera. When the gimbal status is abnormal, the status information is displayed here.

Image Transmission

With the DJI Ronin Image Transmission System mounted, tap Connect to RavenEye on the home screen of the Ronin app to use the image transmission feature. Refer to the DJI Ronin Image Transmitter User Guide for details.

BG30 Grip and Built-In Battery

The BG30 grip is for handheld use. The built-in battery within the grip has a capacity of 1950 mAh and the maximum runtime is 12 hours.

Safety Guidelines

The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:

WARNING Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superficial injury.

NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage and little or no possibility of injury.

WARNING

Read the user manual to become familiar with the features of this product before operating. Failure to operate the product correctly can result in damage to the product, personal property, and cause serious injury. This is a sophisticated product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this product in a safe and responsible manner could result in injury or damage to the product or other property.

This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the documents provided by SZ DJI TECHNOLOGY CO.,LTD. These Safety Guidelines contain instructions for safety, operation and maintenance. It is essential to read and follow all of the instructions and warnings in the user manual, prior to assembly, setup or use, in order to operate the product correctly and avoid damage or serious injury.

To avoid fire, serious injury, and property damage, observe the following safety guidelines when using, charging, or storing the grip.

WARNING

Grip Use

1. DO NOT allow the grip to come into contact with any kind of liquid. DO NOT leave the grip out in the rain or near a source of moisture. DO NOT drop the grip into water. If the inside of the battery comes into contact with water, chemical decomposition may occur, potentially resulting in the battery catching on fire, and may even lead to an explosion.
2. If the grip falls into water by accident, put it in a safe and open area immediately. Maintain a safe distance from the grip until it is completely dry. DO NOT use the grip again, and dispose of the grip properly as described in the Grip Disposal section.
3. Put out any fire using water, sand, fire blanket, or a dry powder fire extinguisher.
4. DO NOT use non-DJI batteries. Go to www.dji.com to purchase new batteries. DJI takes no responsibility for any damage caused by non-DJI batteries.
5. DO NOT use or charge a swollen, leaky, or damaged grip. If the grip is abnormal, contact DJI or a DJI authorized dealer for further assistance.
6. The grip should be used in temperatures from -20° to 45° C (-4° to 113° F). Use of the grip in environments above 50° C (122° F) can lead to a fire or explosion. Use of grip below -10° C (14° F) can lead to permanent damage.
7. DO NOT use the grip in strong electrostatic or electromagnetic environments. Otherwise, the battery control board may malfunction.
8. DO NOT disassemble or pierce the grip in any way or the battery may leak, ignite, or explode.
9. DO NOT drop or strike batteries. DO NOT place heavy objects on the grip.
10. Electrolytes in the battery are highly corrosive. If any electrolytes make contact with your skin or eyes, immediately wash the affected area with fresh running water for at least 15 minutes, and then see a doctor immediately.
11. DO NOT use the grip if dropped.
12. DO NOT heat batteries. DO NOT put the grip in a microwave oven or in a pressurized container.
13. DO NOT manually short-circuit the grip.
14. Clean grip terminals with a clean, dry cloth.

Grip Charging

1. DO NOT leave the grip unattended during charging. DO NOT charge the grip near flammable materials or on flammable surfaces such as carpet or wood.
2. Charging the grip outside of the temperature range of 5° to 40° C (41° to 104° F) may lead to leakage, overheating, or battery damage. The ideal charging temperature is 22° to 28° C (72° to 82° F).

Grip Storage

1. Keep the grip out of the reach of children and animals.
2. If the grip will be stored for an extended period, charge the grip until the battery level reaches between 30% and 50%.
3. DO NOT leave the grip near heat sources such as a furnace or heater. DO NOT leave the grip inside of a vehicle on hot days. The ideal storage temperature is 22° to 28° C (72° to 82° F).
4. Keep the grip dry.

Grip Maintenance

1. DO NOT use the grip when the temperature is too high or too low.
2. DO NOT store the battery in environments with a temperature higher than 45°C (113°F) or lower than 0°C (32°F).

Travel Notice

1. Before carrying the grip on an airline flight, it must first be discharged until the battery level is lower than 30%. Only discharge the grip in a fireproof location and store the grip in a ventilated location.
2. Keep the grip away from metal objects such as glasses, watches, jewelry, and hairpins.
3. DO NOT transport a damaged grip or a grip with battery level higher than 30%.

Grip Disposal

Dispose of the grip in specific recycling boxes only after a complete discharge. DO NOT place the grip in regular trash containers. Strictly follow your local regulations regarding the disposal and recycling of batteries.

NOTICE

Grip Use

1. Make sure the grip is fully charged before use.
2. If a low-battery warning appears, charge the grip as soon as possible.

Grip Charging

1. The grip is designed to stop charging when it is full. It is good practice, however, to monitor the charging progress and disconnect the grip when fully charged.

Grip Storage

1. Discharge the grip to 40%-65% if it will not be used for 10 days or more. This can greatly extend the battery life.
2. If the grip is stored for an extended period and the battery is depleted, the grip will enter sleep mode. Recharge the grip to exit sleep mode.
3. Remove the grip from the gimbal when stored for an extended period.

Grip Maintenance

1. Battery life may be reduced if not used for an extended period.
2. Discharge and charge the grip completely once every three months to keep it in good condition.

Grip Disposal

1. If the grip is disabled and the battery cannot be fully discharged, contact a professional battery disposal or recycling agent for further assistance.
2. Dispose of the grip immediately if it cannot be powered on after over-discharging.

Operation Modes

There are four operation modes for the DJI RS 3 Pro: Upright, Underslung, Flashlight, and Briefcase.

Upright Mode Underslung Mode

Flashlight Mode

Briefcase Mode

Maintenance

DJI RS 3 Pro is not waterproof. Make sure to protect it from dust and water during use. After use, it is recommended to wipe DJI RS 3 Pro with a soft dry cloth. DO NOT spray any cleaning liquids onto DJI RS 3 Pro.

Specifications

Peripheral	Accessory Port	RSA/NATO Ports1/4"-20 Mounting HoleCold ShoeVideo Transmission/LiDAR Range Finder Port (USB-C)RSS Camera Control Port (USB-C)Focus Motor Port (USB-C)
	Battery	Model: BG30-1950 mAh-15.4VType: LiPo 4SCapacity: 1950 mAhEnergy: 30 WhMax. Runtime: 12 hours (measured with the equipment in a level and stationary state, the gimbal balanced, three axes in an active state, and the battery only powering the gimbal.)Charging Time: Approx. 1.5 hours (using 24W charger; it is recommended to use QC 2.0 or PD protocol chargers)Suggested Charging Temperature: 5° to 40°C (41° to 104°F)
	Connections	Bluetooth 5.0Charging Port (USB-C)
	Ronin App Requirements	iOS 11.0 or aboveAndroid 7.0 or above
	Languages Supported by the Touchscreen	English, Simplified Chinese, Traditional Chinese, German, French, Korean, Japanese, Spanish, Portuguese (Brazil), Russian, Thai
Working Performance	Tested Payload 4.5 kg (10 lbs)
	Maximum Controlled Rotation Speed	Pan: 360°/sTilt: 360°/sRoll: 360°/s
	Mechanical Range	Pan axis: 360° continuous rotationRoll axis: -95° to +240°Tilt axis: -112° to +214°
Mechanical & Electrical Properties	Operating Frequency 2.4000-2.4835 GHz
	Bluetooth Transmitter Power <8 dBm
	Operating Temperature -20° to 45°C (-4° to 113°F)
	Weight	Gimbal: Approx. 1,143 g (2.51 lbs)Grip: Approx. 265 g (0.58 lbs)Extended Grip/Tripod (Metal): Approx. 226 g (0.49 lbs)Upper and Lower Quick-Release Plates: Approx. 107 g (0.23 lbs)
	Dimensions	Folded: 268×276×68 mm (L×W×H, excluding camera, grip, and the Extended Grip/Tripod)Unfolded: 415×218×195 mm (L×W×H, height includes grip and excludes the Extended Grip/Tripod)

Contact DJI SUPPORT

This content is subject to change.

Download the latest version from

www.dji.com/rs-3-pro/downloads

If you have any questions about this document, please contact

DJI by sending a message to [e-mail].

DJI is a trademark of DJI.

Copyright © 2022 DJI All Rights Reserved.

Quick Start Guide

Quick Start Guide

v1.0

1

2

3

https://s.dji.com/guide21

WE ARE HERE FOR YOU

Online Technical Support

Contact

DJI SUPPORT

Scan with WeChat

Get Technical Support

SUBSCRIBE FOR MORE INFORMATION

Follow DJI to get the latest news

Know

Briefcase Handle

Product Information

Product Information

Product Information

Product Information

Product Information

Product Information

CE UK CA

This content is subject to change.

Download the latest version from

https://www.dji.com/rs-3

DJI is a trademark of DJI.

Copyright © 2022 DJI All Rights Reserved.

YCBZSS00201303

EN

DJI guarantees that warranty service will be provided for this product starting from the date of purchase. The product's warranty period depends on the specific component type. The warranty period varies and can be up to 12 months (or longer where required by local law) for different components. For more information about the warranty period and after-sales service policy, please visit http://www.dji.com/service/policy.

* Warranty policies may vary according to local laws and regulations.

The products purchased in Australia comply with the DJI Products and Australian Consumer Law hereinafter.

DJI Products and Australian Consumer Law

"DJI" means DJI TECHNOLOGY AUSTRALIA PTY. LTD. Address: 46 Indian Drive, Keysborough, VIC 3173.

DJI guarantees that warranty service will be provided for this product starting from the date of purchase. The product's warranty period depends on the specific component type. The warranty period varies and can be up to 12 months (or longer where required by local law) for different components. For more information about the warranty period and after-sales service policy, please visit http://www.dji.com/service/policy.

* Warranty policies may vary according to the local laws and regulations.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

If you order one of our products in Australia, you have legal rights known as 'consumer guarantees' which apply for a reasonable time from the date of your purchase until the failure becomes apparent and regardless of the manufacturer warranty as provided in the DJI After-sales Policy. The manufacturer warranty therein applies in addition to the rights you have at law and are not intended to limit, modify or restrict your consumer guarantee rights in any way.

The cost of labor, materials, diagnostic testing, and return delivery is covered by DJI, if under the warranty. Under the following conditions during the warranty period (for the latest update of the warranty period of each product, spare part and accessory, please refer to DJI official website: http://www.dji.com/service/policy), the manufacturer warranty therein can be obtained.

1. The following conditions must be met for obtaining the manufacturer warranty service:
2. During warranty period, a product is normal used, as intended by the manufacturer.
3. No unauthorized disassembling, modification or installation has been performed.
4. Labels, serial numbers, waterproof mark, false proof mark, etc. show no signs of tampering or altering;
5. Valid proof of purchase documents in Australia (tax invoice, register receipt, order number, or bank statement showing the transaction) are available.
6. The manufacturer warranty does not cover the following:
7. Crash or fire damage caused by non-manufacturing factors, including but not limited to, pilot errors.
8. Damage caused by unauthorized modification, disassembly, shell opening not in accordance with official instructions or manuals.
9. Damage caused by improper installation, incorrect use or operation not in accordance with the official instructions or manuals. • Damage caused by a non-authorized service provider
10. Damage caused by unauthorized modification of circuits, mismatch or misuse of battery and charger.
11. Damage caused by flights which did not follow recommended instruction manuals.
12. Damage caused by operation in bad weather (i.e. strong wind, rain, sand/dust storm, etc.).
13. Damage caused by operating the product in surrounding environment with electromagnetic interference (i.e. a mining areas, close to radio transmission towers, high-voltage wires, substations, etc.).
14. Damage caused by operating the product in surrounding environment suffering from interference with other wireless devices (i.e. transmitter, video-link, Wi-Fi signals, etc.).
15. Damage caused by operating the product at a weight greater than the safe takeoff weight as specified by the instruction manuals.
16. Damage caused by a forced flight when components have aged or been damaged.
17. Damage caused by reliability or compatibility issues when using unauthenticated third-party parts.
18. Damage caused by operating the product with a low charged or defective battery.
19. Uninterrupted or error-free operation of a product
20. Loss of, or damage to, your data saved in your product.
21. Any software, whether provided with the product or installed subsequently.
22. Failure of, or damage caused by any third party products, including those that DJI may provide or integrate into the DJI product at your request.
23. Any technical or other support by DJI, such as assistance with "how-to" questions and those regarding product set-up and installation.
24. Products or parts with an altered identification label or from which the identification label has been removed.

3. Miscellaneous

• You are responsible for shipping costs for refund, replacement or repair, provided always that your product is confirmed not to be covered under the manufacturer warranty by DJI.
• DJI technical staff will examine the product to identify the responsible party.
• If a product is out of the manufacturer warranty or does not belong to any manufacturer warranty issues, DJI will advise you of the cost of repair and return delivery prior to repair or send back the product.
• If your product is not covered by the manufacturer warranty, you can still request a paid repair service.
• You can contact DJI at [e-mail] or view our official website for more information.

The full terms and conditions of the manufacturer warranty are available at http://www.dji.com/service/policy.

For information on Australian consumer laws, please visit the Australian consumer law website at http://www.consumerlaw.gov.au.

RS 3 PRO

SAFETY GUIDELINES

Safety Overview

Safety at a Glance

Please read this entire document and visit https://www.dji.com/rs-3-pro to view the user manual, other documents, and the tutorial videos with the most current instructions and warnings. Failure to read and follow instructions and warnings may result in personal injury, damage to your DJI OSMO™ product, or other objects in the vicinity. This document and all other collateral documents are subject to change at the sole discretion of DJI OSMO.

By using this product, you hereby signify that you have read and agreed to abide by the terms and conditions of this document. You agree that you are solely responsible for your own conduct while using this product and for any consequences thereof. This product is not intended for use by children without direct adult supervision.

WARNING

1. DJI™ RS 3 Pro is powered by a built-in battery through the grip. Users take full responsibility for all operations and usage.
2. DO NOT use non-DJI batteries. Go to www.dji.com to purchase new batteries. DJI takes no responsibility for any damage caused by non-DJI batteries.
3. The grip should be used in temperatures from -20° to 45° C (-4° to 113° F). Use of the grip in environments above 50° C (122° F) can lead to a fire or explosion. Use of the grip in environments where the temperature is below -10° C (14° F) can significantly reduce operation time.
4. DO NOT disassemble or pierce the grip in any way or the battery may leak, ignite, or explode.
5. DO NOT drop or strike batteries. DO NOT place heavy objects on the grip or charger.
6. DO NOT heat batteries. DO NOT put the grip in a microwave oven or in a pressurized container.
7. Contact DJI Support immediately if any of the components break in order to avoid further damage and risk of injury.
8. DJI RS 3 Pro has built-in high precision sensors. Dropping or striking it in any way may cause permanent sensor damage, leading to abnormal functionality. Contact DJI Support immediately if this happens.

CAUTION

1. DO NOT disassemble DJI RS 3 Pro or its accessories. Improper or poor handling could damage the gimbal.
2. Make sure to keep DJI RS 3 Pro clear of dust and water. Otherwise, it may be damaged.
3. Make sure to mount the gimbal firmly when using DJI RS 3 Pro in a high-speed situation.
4. If DJI RS 3 Pro is mounted to a car, a safety rope is required to tightly secure the gimbal. Only drive on paved roads at a speed less than 100 km/h while shooting.

NOTICE

1. The motor may become hot after long operating durations with the gimbal unbalanced, and operation time will be reduced significantly.
2. DO NOT obstruct the gimbal movements. Otherwise, you may injure your hand.

Specifications

Model P03P

USB Input 5V/2A, 9V/2A, 12V/2A, 15V/1.6A

Bluetooth Operating Frequency 2.4000 GHz-2.4835 GHz

Bluetooth Transmitter Power <8 dBm

Operating Temperature -20° to 45° C (-4° to 113° F)

Compliance Information

FCC Compliance Notice

Supplier's Declaration of Conformity

Product name: DJI RS 3 PRO

Model Number: P03P

Responsible Party: DJI Technology, Inc.

Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502

Website: www.dji.com

We, DJI Technology, Inc., being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.

ISED Compliance Notice

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED.

KCC Compliance Notice

NCC Compliance Notice

EU Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this device (DJI RS 3 PRO) is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.

A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

GB Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this device (DJI RS 3 PRO) is in compliance with the essential requirements and other relevant provisions of Radio Equipment Regulations 2017.

A copy of the GB Declaration of Conformity is available online at www.dji.com/euro-compliance

Environmentally friendly disposal

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

This content is subject to change.

Download the latest version from

https://www.dji.com/rs-3-pro

is a trademark of DJI.

Copyright © 2022 DJI All Rights Reserved.