ES-RT30 - Razor PANASONIC - Free user manual and instructions

Type	Electric Foil Shaver
Brand	Panasonic
Model	ES-RT30
Dimensions (approx.)	5.5 x 2.5 x 1.8 in (14 x 6.3 x 4.5 cm)
Weight (approx.)	0.4 lbs (180 g)
Power Source	Rechargeable Ni-MH battery (1.2V)
Charging Time	8 hours
Usage Time (fully charged)	40 minutes
Shaving System	Single blade foil system with pop-up trimmer
Wet/Dry Use	Yes, can be used with gel/foam and rinsed under water
Pop-up Trimmer	Integrated for sideburns and detailed trimming
Cleaning	Washable under running water; inner blade removable for cleaning
Ergonomics	Contoured handle with textured grip
Safety Features	Low battery indicator; protective foil guard; lock button on pop-up trimmer
Replacement Parts	Foil and blade set (WES9093) available separately
Included Accessories	Cleaning brush, protective cap, AC adapter/charger
Warranty	2 years limited warranty

Frequently Asked Questions - ES-RT30 PANASONIC

How do I charge the Panasonic ES-RT30 for the first time?

Charge the shaver for 8 hours before first use. Use only the supplied charger. The charging indicator light will turn off when fully charged.

Can I use the Panasonic ES-RT30 in the shower?

Yes, the ES-RT30 is designed for both wet and dry use. It is waterproof and can be used with shaving gel or foam. Rinse under running water after use.

How do I clean the shaver?

Remove the foil and inner blade, rinse them under running water. Use the cleaning brush for stubborn hair. Do not use hot water. Dry all parts before reassembly.

How often should I replace the blades and foil?

For optimal performance, replace the foil every 12 months and the inner blade every 6 months. Change sooner if you notice pulling or irritation.

The shaver does not start; what should I do?

First, ensure the battery is charged. If it still does not work, clean the foil and blade area to remove any hair blockage. Press and hold the power button for 2 seconds to unlock if safety lock is engaged.

What is the pop-up trimmer used for?

The pop-up trimmer is located on the back of the shaver. It is used for trimming sideburns, mustache, or detailed areas. Push the tab upward to activate.

Can I travel with the ES-RT30?

Yes, it is compact and comes with a protective cap. The charger is designed for 100-240V voltage, so it works internationally with the appropriate plug adapter.

Why does the shaver leave stubble?

Ensure the foil is not damaged and the inner blade is sharp. Use in circular motions against the grain. Pre-trim long hair with the pop-up trimmer for a closer shave.

How do I replace the foil and blade?

Press the release button to remove the foil frame. Swap the old foil with a new one. Remove the inner blade by pulling it out and replace with a new one. Ensure they lock into place. Use only genuine Panasonic WES9093 parts.

What does the low battery indicator mean?

When the battery is low, the charging indicator blinks. Plug in the shaver to recharge. Do not use while charging. A full charge takes 8 hours and gives about 40 minutes of use.

USER MANUAL ES-RT30 PANASONIC

Operating Instructions

AC/Rechargeable Shaver

Model No. ES-RT30

English 2

Before operating this unit, please read these instructions completely and save them for future use.

Important

Using the shaver

Caution - The outer foil is very thin and can be damaged if not used correctly. Check that the foil is not damaged before using the shaver. Do not use the shaver if the foil etc. is damaged as you will cut your skin.

Charging the shaver

Do not use any power cord or AC adaptor other than one specifically designed for this model. Use the RE7-51 adaptor only for ES-RT30 shaver. Plug in the adaptor into a household outlet where there is no moisture and handle it with dry hands. The shaver may become warm during use and charging. However, this is not a malfunction. Do not charge the shaver where it will be exposed to direct sunlight or other heat sources. Hold the adaptor when disconnecting it from the household outlet. If you tug on the power cord, you may damage it. The supply cord cannot be replaced. If the cord is damaged, the appliance should be scrapped.

Adequate ambient temperature for charging is 0-35 °C. If the plug symbol does not glow initially when the shaver is plugged in, wait for a short while until it does.

Cleaning the shaver

Warning - Disconnect the power cord from the shaver before cleaning it to prevent electric shock.

Keep both the inner blades inserted. If only one of the inner blades is inserted, the shaver may be damaged. If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time. Wipe it with a cloth dampened with soapy water. Do not use thinner, benzine or alcohol.

Storing the shaver

Disconnect the power cord when storing the shaver. Do not bend the power cord or wrap it around the shaver. This appliance is not intended for use by persons (including children)

2

with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Keep these operating instructions in a safe place.

SPECIFICATIONS

Power source: See the name plate on the product. (Automatic voltage conversion)

Motor voltage: 2.4 V DC

Charging time: 1 hour

This product is intended for household use only.

Parts identification

A B

E

© D

G A Protective cap B Outer foil section ① System outer foil ② System outer foil release buttons ③ Foil frame © Inner blades D Main body ④ Foil frame release buttons ⑤ Switch lock button ⑥ 0/1 switch ⑦ LED display ⑧ Appliance socket ⑨ Trimmer ⑩ Trimmer handle E Adaptor (RE7-51) ⑪ Power cord ⑫ Appliance plug F Travel pouch G Cleaning brush

Charge

Charging the shaver

The battery capacity is low when □ blinks.

You can shave 1 to 2 times after □ blinks.

(This will differ depending on usage.)

- A full charge will supply enough power for approx. 14 shaves of 3 minutes each.

1 Insert the appliance plug into the shaver.

2 Plug in the adaptor into a household outlet.

Cord shaving

If you insert the appliance plug to the shaver and plug in the adaptor into a household outlet, you can use it even if the battery capacity is low.

- If the shaver does not work, continue charging it for approx. 1 minute.

About the LED display

While charging After charging is completed

glows. blinks once every second.

10 minutes after charging is completed

blinks once every 2 seconds.

When the battery capacity is low

- blinks.

Shave

Using the shaver

1 Depress the switch lock button and slide the 0/1 switch upwards.

2 Hold the shaver as illustrated above and shave.

- Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave.

Using the trimmer

Slide the trimmer handle up. Place at a right angle to your skin and move downwards to trim your sideburns.

Clean

Cleaning the shaver

1. Disconnect the power cord from the shaver.
2. Apply some hand soap and some water to the outer foil.
3. Turn the shaver on.
4. Turn the shaver off after 10-20 seconds.
5. Remove the outer foil section and turn the shaver on.
6. Clean the shaver and the outer foil section with running water.
7. Wipe off any drops of water with a dry cloth.
8. Dry the outer foil section and the shaver completely.
9. Attach the outer foil section to the shaver.

The mark on the left is for a washable shaver and indicates it can be cleaned with water.

Replacing the system outer foil and the inner blades

system outer foil once every year

inner blade once every two years

▶ Replacing the system outer foil

1. Press the system outer foil release buttons and lift the system outer foil upwards as illustrated.
2. Insert the system outer foil by pushing it downwards until it clicks.

▶ Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards as illustrated.
2. Remove the inner blades one at a time as illustrated.
3. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
4. Insert the inner blades one at a time until they click as illustrated.

Cleaning with the brush

English

1. Clean the inner blades using the short brush by moving it in direction (A). Clean the system outer foil, the shaver body and the trimmer using the long brush.

- Do not move the short brush in direction (B) as it will damage the inner blades and affect their sharpness.

- Do not use the short brush to clean the outer foils.

Removing the built-in rechargeable batteries

Remove the built-in rechargeable batteries before disposing of the shaver. Please make sure that the batteries are disposed of at an officially designated location if there is one. Do not dismantle or replace the batteries so that you can use the shaver again. This could cause fire or an electric shock. Replace them at an authorized service center.

• Disconnect the power cord from the shaver when removing the batteries.
• Perform steps ① to ⑤ and lift the batteries, and then remove them.

For environmental protection and recycling of materials

This shaver contains Nickel-Metal Hydride batteries. Please make sure that the batteries are disposed of at an officially assigned location, if there is one in your country.

Printed in China 0000000000 X0000-0