ESB2018 - Soundbar Element - Free user manual and instructions
Find the device manual for free ESB2018 Element in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Element |
| Model | ESB2018 |
| Product Type | Soundbar |
| Dimensions (W x H x D) | Approx. 36 x 3 x 3 inches (91 x 7.6 x 7.6 cm) |
| Weight | Approx. 5.5 lbs (2.5 kg) |
| Power Supply | AC 100-240V, 50/60 Hz |
| Power Consumption | 30 W (typical) |
| Standby Power Consumption | < 0.5 W |
| Total Output Power | 40 W RMS |
| Speaker Configuration | 2.0 channel |
| Frequency Response | 80 Hz - 20 kHz |
| Audio Inputs | Bluetooth, 3.5 mm AUX, Optical, USB |
| Bluetooth Version | 5.0 |
| Remote Control | Included (battery: CR2025) |
| Wall Mountable | Yes (brackets included) |
| LED Indicator | Yes (front panel) |
| Drivers | 2 x full-range drivers |
| Cabinet Material | Plastic with metal grille |
| Operating Temperature | 32°F - 95°F (0°C - 35°C) |
| Accessories Included | Soundbar, remote control, power cable, 3.5mm audio cable, optical cable, wall mount kit, user manual |
| Warranty | 1 year limited |
Frequently Asked Questions - ESB2018 Element
How do I connect my Element ESB2018 soundbar to my TV via Bluetooth?
Ensure the soundbar is in Bluetooth mode (press the Source button until 'BT' appears). On your TV, enable Bluetooth and search for 'Element ESB2018'. Select it to pair. If prompted, confirm pairing.
What optical cable do I need for the ESB2018?
The soundbar uses a standard optical TOSLINK cable (included). Connect one end to the soundbar's optical input and the other to your TV's optical output. Ensure both devices are turned on.
Can I control the soundbar with my TV remote?
The ESB2018 supports ARC (Audio Return Channel) via HDMI (if your TV has HDMI ARC). Connect using an HDMI cable from the soundbar's HDMI OUT to your TV's HDMI ARC port. Then, you can control volume with your TV remote.
Why is there no sound from my soundbar?
Check that the soundbar is powered on and the correct source is selected. Ensure the connected device is playing audio. If using optical, verify the TV's audio output is set to PCM or Bitstream. Also try increasing the volume on both the soundbar and the source device.
How do I reset the Element ESB2018 soundbar?
Press and hold the Power button on the soundbar for approximately 10 seconds until the LED flashes quickly. This will reset the soundbar to factory defaults.
Can I use the soundbar without the remote?
Yes, the soundbar has manual buttons: Power, Volume Up/Down, and Source on the top or front panel. You can switch inputs and adjust volume without the remote.
What is the maximum Bluetooth range?
The Bluetooth 5.0 range is approximately 32 feet (10 meters) in open space. Walls and obstacles may reduce range.
Does the soundbar support Dolby Atmos?
No, the Element ESB2018 is a basic 2.0 channel soundbar and does not support Dolby Atmos or surround sound formats. It enhances TV audio but provides stereo sound only.
How do I clean the soundbar?
Unplug the soundbar. Use a soft, dry cloth to wipe the exterior. Do not use any liquids or chemical cleaners. Avoid touching the speaker grille with sharp objects.
My soundbar turns off automatically. How to disable this?
The Auto Power Off feature is enabled by default to save energy. To disable it, press and hold the Mute button on the remote for 5 seconds until the LED blinks twice. Repeat to re-enable.
User questions about ESB2018 Element
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Soundbar in PDF format for free! Find your manual ESB2018 - Element and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ESB2018 by Element.
USER MANUAL ESB2018 Element
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Element
Model : ESB2018
Category : Soundbar