Lore - Effect machine Walrus Audio - Free user manual and instructions
Find the device manual for free Lore Walrus Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Reverb and Delay Effect Pedal |
| Brand | Walrus Audio |
| Model | Lore |
| Dimensions | 4.5 x 2.5 x 1.5 inches (11.4 x 6.4 x 3.8 cm) |
| Weight | 1.0 lb (0.45 kg) |
| Power Input | 9V DC, center negative, 300 mA |
| Effects | Reverb, Delay, Reverse, Lo-fi, Modulated |
| Controls | Mix, Decay, Tone, Modulation Speed, Modulation Depth, Trails On/Off |
| Bypass | True Bypass |
| Audio Channels | Mono In, Mono Out |
| Input Impedance | 1 MΩ |
| Output Impedance | 100 Ω |
| Noise Floor | -100 dB (typical) |
| Sampling Rate | 48 kHz |
| Construction | Aluminum enclosure with powder coat finish |
| Maintenance | Clean with dry cloth; avoid solvents |
| Safety | Use only recommended power supply; do not expose to moisture |
| Spare Parts | Contact Walrus Audio for replacement knobs, switches, and jacks |
| Reparability | Serviceable by authorized technicians; DIY not recommended |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - Lore Walrus Audio
What type of effects does the Lore pedal offer?
The Lore pedal combines reverb and delay with ambient and modulated textures, including reverse and lo-fi settings.
Can I use the Lore with a 9V battery?
No, the Lore requires a 9V DC center-negative power supply with at least 300 mA. It does not have a battery compartment.
Does the Lore have true bypass?
Yes, the Lore features true bypass switching to preserve your guitar tone when the effect is off.
How do I engage the trails mode?
Hold the bypass footswitch for 2 seconds to toggle trails mode, letting the reverb/delay fade naturally after bypass.
What are the dimensions of the Lore pedal?
The Lore measures approximately 4.5 x 2.5 x 1.5 inches, fitting standard pedalboard layouts.
Is the Lore compatible with stereo setups?
No, the Lore is a mono input and mono output pedal. It does not support stereo operation.
What does the modulation control do?
The modulation control adjusts the speed of the internal LFO, adding movement and warmth to the repeats and reverb tail.
Can I use an expression pedal with the Lore?
No, the Lore does not have an expression pedal input. All parameters are controlled via knobs and switches.
What is the recommended cleaning for the Lore pedal?
Wipe the enclosure with a soft, dry cloth. Avoid using chemical cleaners or abrasives that could damage the finish.
Does Walrus Audio offer replacement parts?
Yes, contact Walrus Audio support for replacement knobs, footswitches, and jacks. Repairs should be performed by authorized service centers.
User questions about Lore Walrus Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Lore - Walrus Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Lore by Walrus Audio.
USER MANUAL Lore Walrus Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Walrus Audio
Model : Lore
Category : Effect machine